Welcome to the TouchScreen
7
Security Zone Function Description Sensor Types
When the system is armed, faulting this type of sensor
starts an Entry Delay countdown rather than sending an
immediate alarm.
During Exit Delay, this zone can be repeatedly faulted.
Doorways can be configured to be entry/exit or non-
entry/exit.
Note: For more information on Entry/Exit delays, see
" Managing Your System Security" on page 24
Perimeter If faulted when the system is armed or during an Entry/Exit
delay, an alarm is tripped.
Door/Window
sensor
Motion
detector
Glass break
detector
Interior Follower Monitors the internal living spaces of the premises and
triggers an immediate alarm if the system is armed in Away
mode.
Not armed when the system is in Armed Stay mode.
Motion
detector
Interior with Delay Provides an entry delay if the motion sensor is tripped
when the TouchScreen is armed. Entry Delay begins
whenever the motion sensor detects motion, regardless of
whether an entry/exit delay zone was tripped first.
Motion
detector
Interior Follower Arm
Night
Allows the use of a motion detector in Arm Night mode.
The alarm trips immediately if motion is detected. This
zone should be assigned to motion detectors that are
placed in areas of low traffic, such as attics, basements, and
garages.
Motion
Detector
Interior Delay Arm Night Provides a delay equal to the entry delay when the
detector is tripped. This zone can be used in a high-traffic
area.
Motion
Detector
24-Hour Inform When this security zone is tripped, there is never an alarm.
However, an event is recorded in the history, and the
TouchScreen emits a configured sound.
Door/Window
sensor
Motion
detector
Glass break
detector
24-Hour Fire Generates an immediate fire alarm if triggered. Smoke alarm
Silent 24-Hour Usually assigned to a zone containing an emergency Door/window
sensor
