1. Snap the strobe into the #2 mounting bracket.
2. Stick the #2 mounting brackets on the windows, using
2-sided foam tape.
3. Rotate the strobe until the strobe’s red lens faces
forward.
4. To mount on the windowsill, screw the base into the
sill.
9
SPECIAL NOTES-----Customer Instructions
This equipment complies withPart 68 of the FCC rules. On the bottom
of this equipment is a label that contains, among other information, the FCC
certification number and ringer equivalence number (REN) for this
equipment. If requested, this information must be provided to the telephone
company.
An FCC compliant telephone cord and modular RJ11 plug is provided
withthis equipment. This equipment is designed to be connected to the
telephone network or premises wiring using a compatible modular jackthat
is part 68 compliant. See installation instructions for details.
The REN is used to determine the quantity of devices that may be
connected to the telephone line. Excessive RENs on the telephone line may
result in the devices not ringing in response to an incoming call. Typically,
the sum of RENs should not exceed five (5.0). To be certain of the number
of devices that may be connected to a line (as determined by the total
RENs) contact the local telephone company.
If the 911 Alert Dialing Sensor causes harm to the telephone network,
the telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice isn't
practical, the telephone company will notify the customer as soonas
possible. Also, youwill be advised of your rightto file a complaint with the
FCC if you believe it is necessary.
The telephone company may make changes to it's facilities, equipment,
operations or procedures that could affect the operation of the equipment. If
this happens the telephone companywill provide advance notice so you can
make the necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment 911 Alert Dialing Sensor,
for repair or warranty information, please contact:
Technology Programs Inc.
P.O. Box 172
Bradley, Il 60915
Telephone: 815-932-4890
If the equipment is causing harmto the telephone network, the
telephone company mayrequest that youdisconnect the equipment until the
problemis resolved.
You should not attempt to repair this equipment yourself. This
equipment contains no customer or user serviceable parts.
Connection to party line service is subject to state tariffs. (Contact the
state public Part 68 ApplicationGuide 44 utility commission, public service
commission or corporation commission for information.)
