Tecmec Sirio HH Compact Gebrauchsanweisung

Sirio HH Compact

Instruction and maintenance manual

Page 1di 24

Instruction n° 207 - Rev. 4 datel 19/10/2017

Sirio HH

Compact

Code. 012633 Code. 012634 Code. 012635

Instruction and maintenance manual

Sirio HH Compact

Instruction and maintenance manual

Page 2di 24

Instruction n° 207 - Rev. 4 datel 19/10/2017

Indice

1GENERAL INFORMATION 3

1.1 MANUFACTURE IDENTIFICATION 3

1.2 PRODUCT IDENTIFICATION 3

1.3 CE DECLARATION 4

1.4 REFFERED NORMS 5

1.5 WARRANTY 5

2EQUIMENT DESCRIPTION 6

3SAFETY 7

3.1 SAFETY NORMS 7

3.2 ELECTRICAL POWER SUPPLY 7

3.3 WORKING ZONES 8

3.4 COMPONENTS AND SAFETY DEVICES 8

3.5 RESIDUAL RISKS 8

3.6 SYMBOLS SHOWN ON THE EQUIPMENT 9

3.7 INTENDED USE OF THE EQUIPMENT 9

3.8 NON INTENDED USE 9

4TRANSPORT AND HANDLING 10

5INSTALLATION 11

6OPERATING 14

6.1 OPERATION INSTRUCTION AND ELECTRICAL PANEL ADJUSTMENT 14

6.2 CUSTOMIZED AGITATION AND PAUSE SETTINGS 15

6.3 MODIFICA DELLA MODALITÀ DI FUNZIONAMENTO ERRORE.IL SEGNALIBRO NON È DEFINITO.

6.4 LOADING AND UNLOADING OF CANS 18

7MAINTENANCE 19

7.1 ORDINARY MAINTENANCE 19

7.2 NON USE PERIODS 19

8TROUBLESHOOTING 20

9SPECIFICS 21

10 ELECTRICAL SCHEMATIC 22

10.1 WIRING ELECTRICAL PANEL STANDARD MOTOR SINGLE PHASE 22

11 DISPOSAL 23

12 SPARE PARTS 24

Sirio HH Compact

Instruction and maintenance manual

Page 3di 24

Instruction n° 207 - Rev. 4 datel 19/10/2017

1 GENERAL INFORMATION

1.1 Manufacture identification

TECMEC S.r.l.

Località Faustina, 63

20080 Albairate (MI) –Italy

Tel: +39 02 9469871

Fax: +39 02 94698741

e-mail: tecmec@tecmec.com

web: www.tecmec.com

1.2 Product identification

The identification label, is located o the left side of the structure, with the below mentioned data:

Safety and Health Requirements Symbols

Manufacture Data

CE Mark

Production Year

Serial Number

Univocal Machine Code

Motor Protection Class

Electrical Characteristics

Sirio HH Compact

Instruction and maintenance manual

Page 4di 24

Instruction n° 207 - Rev. 4 datel 19/10/2017

1.3 CE Declaration

Sirio HH Compact

Instruction and maintenance manual

Page 5di 24

Instruction n° 207 - Rev. 4 datel 19/10/2017

1.4 Reffered norms

2006/42/CE Machine directive

2014/35/UE Low voltage directive

UNI EN ISO 12100:2010 Safety Machinery - General Principles for Design - Risk reduction and

assessment

CEI EN 60204-1 Electrical Equipment of Machines

2014/30/UE Electromagnetic Compatibility

1.5 Warranty

The warranty covers free of charge the repair or replacement of the components with manufacturing

defects.

For the condition, please refer to the document containing the warranty terms inside the CD supplied

with the equipment.

In particular the warranty will not cover any transport damage, or non compliance with the installation

and or due to operating instructions, and for unauthorized personnel, and for reason not caused by the

manufacturer.

Sirio HH Compact

Instruction and maintenance manual

Page 6di 24

Instruction n° 207 - Rev. 4 datel 19/10/2017

2 EQUIMENT DESCRIPTION

The timed dispenser HH Compact is an equipment designed for the professional sector.

The unique feature of this equipment is to store/stow in a sheltered place the color pastes contained in

suitable container/cans.

In order to avoid accidents or injury to person, or and things, the equippment have to be used by trained

personnel.

Sirio HH Compact

Instruction and maintenance manual

Page 7di 24

Instruction n° 207 - Rev. 4 datel 19/10/2017

3 SAFETY

3.1 Safety norms

The products of the series HH Compact must be included in the assessment of the corporate risk, and

requires compliance with applicable laws regarding safety at work .

To ensure the highest possible degree of safety, for the correct use of the equipment, all measure deemed

necessary have been adopted, during the phase of the desing, construction, testing and installation.

For a proper use, the dispenser have to be used by trained personnel, in order to avoid

accidents or injury to person or things.

The used components is in accordance with the applicable standards.

The dispenser SHC Compact must be located in a special tank/container, suitable to contain any accidental

products leaks.

3.2 Electrical power supply

Determined the installation area the following prerequisites have to be implemented:

The main power supply have to be provided through an electrical panel, placed on the wall near to the

dispenser.

The maximun expected power is 0.2Kw. The section of each conductor must be a minimum of 1,5 mm².

The main power supply line must be fitted with an efficient ground connection, and complies with all the

requirements in force.

The electrical power supply panel must be composed of a differential switch (IΔn=0,03A) with voltage

and phase compatible with the agitation motor (single phase).

To ensure a complete safe operation for the operator and the equipment, it's very important using during

the assembly of the electrical panel the above mentioned type of switch, due to the fact that the switch will

have a protective function against possible direct or accidentals voltage hazard down to ground .

It's important to make the necessary assessment of the site, and follow the requiring and characteristic rules

of the electrical system, to ensure that they are not a cause of accidents or injuries.

To avoid that the equipment have instability issues, it's necessary to verify the perfect leveling of the feets

loceded in the bottom part of the structure as per the assembly instructions.

Sirio HH Compact

Instruction and maintenance manual

Page 8di 24

Instruction n° 207 - Rev. 4 datel 19/10/2017

3.3 Working zones

The zones where improper use and not allowed intervention may present risks are the below mentioned :

Operator Zone (front zone: for cans loading and unloading lateral zone: dispensing )

Maintenance Zone (front and rear zone)

3.4 Components and safety devices

The machine is equipped with an emergency button, placed on the control panel.

A pressing action of this button cause an immediately emergency stop, classified as category 0, the power to

the motor will be interrupted, and will interrupt the agitation movement.

Once the emergency situation is resolved, release the emergency button to restore the normal operation:

Release the emergency button

Press the START button

3.5 Residual risks

In spite of precaution adopted in the design of the equipment, to ensure safe use there may be reasonably

foreseeable situation for which it has only been possible to reduce the risk without completely eliminating it.

Risk

Precaution

Injuries and or crushing during the loading and or

unloading of the cans.

Use protective gloves and safety shoes during loading and

unloading of the cans.

Eyes damage due to paint splashes.

Use protective glasses.

Improper actions during the agitation cycle.

Don't load or unload cans during the agitation.

Don't put your hands, or tools/items in the agitation zone

during the normal operation cycle.

The dispenser is designed to handle colorant/pastes of various types. Prior to their use, follow

the instructions, warning and safety instruction on each individual can/package, and on the

data sheet issued by the producer.

MAINTENANCE ZONE

0.5MT

1.4M

0.5MT

OPERATOR ZONE

(DRIVER PROGRAMMING )

OPERATOR ZONE

(LOADING AND UNLOADING )

0.2MT.

1.4M

0.2MT

Sirio HH Compact

Instruction and maintenance manual

Page 9di 24

Instruction n° 207 - Rev. 4 datel 19/10/2017

3.6 Symbols shown on the equipment

Danger electricall hazard .

Is forbidden to carry out work on the equipment under voltage.

Is forbidden to operate on the electrical system without authorizations.

Danger gear in movements.

Forbidden to load or unload the cans during the agitation cycle.

Mandatory to read carefully the instruction manual, before carry out any operations on

the equipment.

Obligation earthing requirement of the electrical system.

3.7 Intended use of the equipment

The unique feature of this equipment is to store/stow in a sheltered place the color pastes contained in

suitable container/cans (not provided byTecmec) closed by suitable lids (provided by Tecmec).

3.8 Non intended use

Any other use of this equipment that are not described in this manual are considered improper and therefore

prohibited.

In particular it is forbidden:

Load or unload the cans during the agitation cycle/process, as the drive blades are in motion.

During this process the Led warning is clearly visible on the control panel.

Any kind of manumission or unauthorized intervention on the electrical control panel.

Access the motor compartment by unauthorized personnel, and in any case when the plug for the main

power is connected.

Remove the protection from the motor compartment, if so only during the maintenance phase done only

by expert personnel.

In any case it is absolutely mandatory to remove the plug from the main electrical/power line

before executing any kind of maintenance.

Sirio HH Compact

Instruction and maintenance manual

Page 10 di 24

Instruction n° 207 - Rev. 4 datel 19/10/2017

4 TRANSPORT AND HANDLING

The equipment are packed in special cardboard boxes and transported on pallets.

Each box is labeled with: type of module, code, production order.

The identification label with the symbols, and the risks and residual risks is located on the front side of the

motor module panel.

In case of needs to move an operating equipment please follow the below points:

always operate by following the instruction provided by existing accident prevention regulation

remove the shelf’s, and place all the colorants cans in a appropriated place

place the dispenser on a pallet

move the pallets with appropriated means to the new destination

install the equipment by following the instructions

For movement over long distance, the equipment MUST be packed and secured on pallets, as

when it was delivered.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tecmec Spender Handbücher

Tecmec

Tecmec Sirio HH Series Bedienungsanleitung

Beliebte Spender Handbücher anderer Marken

Silver King

Silver King Majestic SK12MAJ Kurzanleitung

Franke

Franke F3Dn Twin Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON UltraHot Plus Bedienungsanleitung

DAN DRYER

DAN DRYER 282 Bedienungsanleitung

Essity

Essity Tork 473208 Bedienungsanleitung

CBS

CBS SD300BU-88 Einrichtungshandbuch

Sealey

Sealey MK77 Bedienungsanleitung

Fluid Management

Fluid Management Accutinter 1600 Bedienungsanleitung

Franke

Franke DVS SD99-010 Bedienungsanleitung

Graco

Graco Dispensit 1053-10C Fehlerbehebungshandbuch

ITALTINTO

ITALTINTO i50 Bedienungsanleitung

Coca-Cola

Coca-Cola FREESTYLE 9000 Bedienungsanleitung

Graco

Graco ProMix 2KE Bedienungsanleitung

TECHCON SYSTEMS

TECHCON SYSTEMS TS1251 Bedienungsanleitung

Wayne

Wayne GLOBAL VISTA CNG Bedienungsanleitung

clarsen

clarsen H133 Bedienungsanleitung

PicoBrew

PicoBrew Zymatic Bedienungsanleitung

BOWMAN

BOWMAN BP-007 Bedienungsanleitung