TECOR TR-508X Bedienungsanleitung

PAPER SHREDDER

Instruction Manual

Model: TR-508X

Important: Please read the following instructions carefully before

operating the shredder and retain this manual for future use.

PRODUCT OVERVIEW

AUTO

OFF

REV

AUTO - Shredder in standby

mode, shredding will start when

paper sheets are inserted into

the paper entry

OFF - Shredder is off and will not

run

REV - Shredder will rotate in

opposite direction, forcing paper

to exit at top

A - Function switch (AUTO/OFF/REV)

B - Paper entry

C-Shredder head

D-Waste bin

Model

TR-508X

Features

Shreds paper and credit cards

Weight

4KG

Shred Type

Cross Cut

Capacity

8 Sheets (A4 80gsm)

Waste Bin Volume

15L

Avg. Particle Size

5mm x 38mm

Dimension

315mm(H) x 195mm(W) x 356mm(D)

Paper Entry Width

220mm

Duty Cycle

2 min. ON 40 min. OFF

Noise Level

≤72dB Load

Motor Power

340W

Voltage

220~240V 50Hz

Current

1.5A

WARNING

Safety First

Do not insert fingers into

opening

Read the entire

instruction manual before

operating the shredder

Keep ties and loose clothing

clear

Keep children away from

the machine. This

machine is not intended

for use by children

Keep loose jewellery clear

No staples

Keep long hair clear

No paper clips

No aerosols. Do not spray

cleaners or lubricants, as these

may present a risk of fire.

PRODUCT SPECIFICATIONS

IMPORTANT SAFETY WARNINGS

Please read the following carefully before use.

•

Do not immerse the shredder in water or any other liquid

•

Do not operate the shredder with a damaged cord or plug, after any

malfunctions, or after damage in any manner.

•

Do not exceed the maximum recommended number of sheets when feeding paper into

the shredder.

•

Do not shred plastic films, adhesive paper or labels, clothing or plastic

•

Do not put paper clips or staples into the shredder to avoid damaging the

blades.

•

Always unplug the shredder before cleaning the waste bin.

•

A full waste bin may lead to a paper jam, empty waste bin before it is full.

•

Unplug the shredder if not in use for extended periods of time.

•

Keep ties, jewelry, hair, fingers etc. away from the shredder paper entry for

safety purposes.

•

Avoid touching the paper entry with hands or fingers.

•

Keep aerosol products away from the shredder as these can damage the motor

and present a risk of fire.

•

Do not place the shredder near any heat source or in a humid environment.

•

Keep the shredder far away from areas frequented by children and pets.

•

This product is not intended for use by children.

OPERATION GUIDE

Read and follow all the safety instructions before using the shredder.

Make sure that the shredder head is resting securely on top of the waste bin.

Plug the power cord into an electrical outlet.

Turn the switch to “AUTO” position, and the shredder will be in standby mode.

Insert thepaper or credit card verticallyinto the entry, the shredder should begin

shredding.

After the shredding, the shredder will return to standby mode.

OVERHEAT PROTECTION

Duty cycle of this shredder: 2min on 40min off

•

Continuous use of the shredder may cause the motor to exceed normal operating

temperature and trigger the overheat protection which will cause the motor to shut off

•

Simply unplug the shredder power cord from the electrical outlet and allow

the motor to cool (approximately 40 minutes for a complete cool-down). The

motor will return to normal operation afterwards.

DISPOSAL OF WASTE

Unplug the power cord from the electrical outlet.

Remove the shredder head from the waste bin by lifting the handle straight up.

Empty the waste bin.

Replace the shredder head on the wastebin.

Plug the power cord back into the outlet.

CLEARING PAPER JAMS

Turn the switch to “REV” position.

The shredder will rotate in opposite direction expelling any jammed paper

out.

Pull out the paper carefully to clear the paper entry, and turn the switch backtothe

“AUTO”position.

Reduce the number of sheets to be shredded for the first pass after the clearing.

TROUBLESHOOTING

Abnormities

Cause

Countermeasure

After finishing

normal shredding,

the shredder does

not return to

standby mode

Too much scrapped

paper in the waste

bin, so that the

scrapped paper

cannot fall and leave

the exit.

Cut off the power, and

empty the waste bin, press

the scrapped paper down

to keep them away from

the machine head.

The Paper feed is

working, but there

are still some

scrapped paper

hanging at the exit

after finishing

The slots of the

blades are clamping

onto the scrapped

paper.

Set the switch to "REV" for

the scrapped paper to exit

from the top (if needed,

please unplug the power

and clean the scrapped

paper at the exit).

The shredder does

not work after

withdrawing the

paper

The scrapped paper

is blocking the

sensor.

Set the slide switch to

"REV" for the paper to exit

from the top

Paper is fed into

the entry, but the

shredder does not

work

Paper is not

touching the sensor.

Adjust the angle of the

paper fed into the shredder

to ensure that it touches

the sensor.

The paper is

jammed, and the

machine stops

rotating.

The number of

paper sheets

inserted exceeds the

maximum capacity.

The jam made the

motor overheat and

triggered the

overheat protection.

Set the switch to "REV" and

withdraw the shredding

paper.

Unplug and allow the

machine to cool down.

The machine

doesn't start after

inserting a sheet of

paper, or stops

running when

paper is being

inserted.

The paper is too

thin, too soft, too

crinkly, or humid to

activate automatic

inductive device.

Set the switch to

“REV”to clear the

paper entry

Set the switch back to

“AUTO”, fold the

paper and insert

again.

Warranty

Valid for Australian customers only

TECOR warrants that this product will be free from defects and work as

intended for the period of 12 months starting from the date of purchase by the

original customer. If the product has any defects or does not work as intended

during the warranty period, Tecor will, at its election and at its expenses, repair

or replace the product.

This warranty does not apply:

•

where the defect is a result of misuse, abuse, accident, alteration or neglect;

•

where the product has not been used in accordance with all provided

instructions;

•

where the product has been intentionally or negligently damaged;

•

where the customer has attempted to change or repair the product;

•

to damages arising from fair wear and tear

To make a claim under this warranty, please return your product with your

receipt or proof of purchase to the reseller.

This warranty is provided in addition to any rights you may be entitled to under

the Competitions & Consumer Act 2010.

Inhaltsverzeichnis

Beliebte Aktenvernichter Handbücher anderer Marken

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung

GBC

GBC ShredMaster CC055 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

Rexel

Rexel Optimum AutoFeed+ 45X Bedienungsanleitung

Martin Yale

Martin Yale 227284S1 Bedienungsanleitung

Bonsaii

Bonsaii DocShred C223-A Bedienungsanleitung

HSM

HSM Pure 740 max Bedienungsanleitung

TRU RED

TRU RED TR-BMC20A Bedienungsanleitung

Fellowes

Fellowes 50S Bedienungsanleitung

GBC

GBC SHREDMASTER 1236SE Bedienungsanleitung

Gude

Gude GH 2600 P Bedienungsanleitung

Ativa

Ativa DQ80M Bedienungsanleitung

Q-Connect

Q-Connect Q8CC Bedienungsanleitung

Fellowes

Fellowes POWERSHRED C-325CI Bedienungsanleitung

Olivetti

Olivetti Privacy 5000C Kurzanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

Dahle

Dahle paperSAFE 22022 Bedienungsanleitung