TECshow ION 280F Bedienungsanleitung

USER MANUAL / MANUAL DE USUARIO

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE /

POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR

ION 280F

1. Overview

Ion 280F is a beam moving head wered by the famous Os-

ram Sirius® HRI 280W lamp. Thanks to its advanced optical

system, this moving head achieves a razor-edge 1.3º beam

angle, defining notoriously its beam. With a luminous flux

of 170.000 Lux @ 32 . the fixture easily stands out on larg-

er-scale stages and in the most demanding applications.

Ion 280F sports 14 dichroic filters + open, 14 static & index-

able gobos, frost filter and an 8-facet rotating prism. Last

but not least - thanks to its 3 phase motor - Ion 280F is ca-

pable of extremely fast & precise movements.

Specifications

Source & Optic

• Light Source: Osram Sirius® HRI 280W

• Lamp life: 2,000 hours

• Beam angle: 1.3°

Photometric Data

• Luminous Flux: 11,165 lumen

• Flux: - 170,000 Lux @ 10m (32 .)

• - 74,000 Lux @ 15m (49 .)

• - 43,000 Lux @ 20m (65 .)

Eects & Functions

• Color wheel: 14 interchangeable dichroic filters +

open, and bidirectional rainbow eect

• Color bounce

• Static gobo wheel: 14 static gobos + open

• Gobo diameter: Outside 13.8 mm., Inside 6 mm.

• Gobo shaking

• 8-facet rotating prism

• Frost Filter

• Motorized focus

• Dimmer: Full range 0-100%

• Strobe eect

Control

• DMX channels: 11/13

• RDM function

• Indicate temperature info of base, arm and lamp

• Back-up communicating IC

• Soware upgrade via DMX

• Fan speed auto-adjust according to temperature

Movement

• Pan: 630° / 540°

• Tilt: 265°

• 3 phase motor

• 16-bit resolution

• Auto repositioning

Electrical

• Input voltage range: 100–240V, 50-60Hz

• Power supply: Electronic auto-ranging

• Power consumption: 420W

Physical

• DMX connectors: 2 XLR connectors(XLR-3InandOut)

• Power supply connectors: PowerCON® In

• COG 2 inches display

• Dimensions: 343x250x501 mm. / 13.5x9.8x19.7 in.

• Weight: 15 Kg. / 33 Lbs.

ENGLISH VERSION

ION 280F

2. Introduction

Before unpack the fixture, please make sure that

the packing is in good condition to use it.

The following items will be found in the box:

- The fixture

- This users guide

- 1.5m power cable with powercon

- Bracket with nuts for handing installation

- Safety chain

ENGLISH VERSION

Description of the device



9. Mode/Esc

10. Down button

11. Up button

12. Enter button

13. Display

PROJECT LENS

HEAD

ARM

BASE

DISPLAY

FOOT STAND

OPERATION BUTTON



14. 3-pin DMX in

15. 3-pin DMX out

16. Powercon in

17. Fuse holder

18.Power switch

ION 280F

ENGLISH VERSION

Colors and Gobos

Red

Orange

Yellow

Blue Green

Amber

Light Blue

Green

Light red

Magenta

Dark Green

Dark Yellow

Blue

OPEN

ION 280F

ENGLISH VERSION

STATIC GOBO WHEEL

ION 280F

ENGLISH VERSION

3. Safety and maintenance

Information

• Before operate this unit, please carefully read

this users guide and keep if needed in future. It’s

necessary to respect following rules.

• The disposal of the device aer lifecycle could

damage the environment, need to take it to spe-

cial company for recycling or return to authorized dealer.

• The products referred to in this manual conform

to the European Community Directives and are

therefore marked with CE logo.

• Keep this device away from children and unau-

thorized users, the manufacturer will not take re-

sponsibility for the damage due to any disregard

of the information provided in this manual and

wrong operation.

• Before operate the device, pls make sure the fix-

ture is in good housing, ensure pan and tilt can

rotate in its complete range.

• Make sure minimal 0.5m distance need to kept

between the fixture to any flammable material

• The device can only run with 100-240v voltage,

50/60Hz power, don’t connect to any other

wrong power. Disconnect the device from main

power before open the shield or maintenance.

• The device is designed only for indoor usage, pls

keep it away from moisture. Do not expose the

device under the sun or directly to any other

lighting source.

• Never look directly into the projecting lens when

the fixture is power on, the light may trigger epi-

leptic seizures in photosensitive persons or per-

sons with epilepsy. Especially at beam eect, ex-

ION 280F

ENGLISH VERSION

treme caution and observance of these safety in-

structions is mandatory.

• Don’t put or install the device on a surface that

subject to vibration or bumps.

• The device is supposed to work in the temperate

range -15° C and +45° C, do not use the device

when the temperate exceed this range.

• The lens, shield need to be replaced when obvi-

ously broken, never use the device when the

shield is not completed closed.

• Safety I class device, need to be earth connected.

• When the fixture is hanged overhead, the safety

rope must be fixed to the bottom of the device to

the appropriate fixing point.

• Always carry the device by the handles, do not

take the head or arm directly for transportation.

Maintenance

Operation only allowed to qualified person, damages due

to unprofessional operation or remove of any parts inside

will not be considered in warranty service. There are no

serviceable parts inside the device or package, service

only leaves to authorized dealers.

• Never allow the optical components contact with

oil, fat or any other liquid.

• A regular clearance of the device is needed for

long-term usage, this is very helpful to maintain

the lifetime and brightness need to use a so and

lint-free cloth to clean the optical system, fan and

air flowing tunnel.

ION 280F

ENGLISH VERSION

TROUBLESHOOTING

PROBLEMS POSSIBLE REASONS CHECKING OR SOLUTIONS

Device not power up Powercon or power cable damaged

Faulty power supply

Change a good power cable to try

Replace new power supply

Pan/Tilt error or vibrate Faulty Pan/Tilt PCB

Faulty opto sensor

Cable loosen

Replace PT001 PCB

Replace opto sensor OP001

Check the cable connect to OP001

Lamp o Temperature protection

Fan not working

Faulty Lamp

Dimmer and strobe set at 0

Faulty power supply

Check the temperature from menu

Check the fan speed info from menu

Replace new Lamp

Set dimmer and strobe channel at

255

Replace new power supply

Device not response to DMX Faulty communication IC

Faulty display PCB

Wrong DMX addressing

Faulty DMX cable

Replace the IC with back-up one in

the display PCB

Replace new display PCB

Check the address and setting

Change to a good DMX cable

Replacement of the fuse

Need to replace with same type and rating, which original-

ly installed in the device.

Step One: Unplug power cable from main power.

Step Two: Unscrew the fuse holder out of the housing with

a screwdriver.

Step Three: Remove the broken fuse and replace with an

exact same type of new fuse.

Step Four: Insert the fuse holder back to the housing and

screw tight and reconnect power

ION 280F

ENGLISH VERSION

4. Installation

The device could be either put on a solid and even Surface,

or mounted upside down or sideways like le picture.

The mounting place must be suicient stable and be able

to support a weight of 10 times of the unit’s weight. When

the fixture is hanged, always additionally secure the device

with the safety chain, fasten the safety rope at a suitable po-

sition so that the maximum fall of the projector will be 20 cm



How to do mounting installation



Step one: Installation the clamp onto the bracket;

Step two: Install the clamp and bracket on the bottom of

panel, fasten the quick-locks;

Step three: Install the whole device onto appropriate

truss and fasten the clamps, tight the safety rope with the

truss or other fixing point at a suitable position that drop

down distance not exceed 20 cm.

ION 280F

ENGLISH VERSION

Default setting shadowed. Mark with 1 can be basic reloaded, 2 be program reloaded, 3 can be private reloaded.

Connect DMX Addr xxx DMX address setting

Slave Rece Choose Slave mode

Sequence Alon/Mast Choose Sequence mode

Music Alon/Mast Choose Sound mode

Light Max Temp 80~130, 90 Lamp o if temperature con-

tinuously over for 5 minutes

Lamp Adjust CHxx=XXX….. Adjust value of each channels

Information Lamp Temp XXXC Temperature of driver

Set Reset Reset

Movement RPan

RTilt

Degr

Enco

Mode

ON/OFF

630/540

ON/OFF

Mod1/Mod2

Reset

Pan Reverse

Tilt Reverse

Choose Pan Degree

Encoder wheel on/o

Choose pan/tilt mode

UI Set Mic

Sign

Fan

Hibe

Back

Flip

User

0~99%,60%

Close/Hold/Auto/

Music

Auto Speed /High

Speed

OFF, 01M~99M，15M

02~60m 02m

ON/OFF

Use1/Use2

Sensitivity of Mic

Mode when no signal

Fans mode

Sleeping mode

Show backlight time

Display 180°reverse

Users mode

Calibration Code

CHxx

XXX

Password: 050

Calibrate channel value

Fixture ID Rdm Name

-Password-

PID Code

Name

Password: 050

Set PID of RDM

Soware V IC Version

Reload Default Basic Reload

---Password---

All Reload

ON/OFF

XXX

ON/OFF

Basic Reload

Password: 050

All Reload

Control Menu

Inhaltsverzeichnis

Sprachen:

Andere TECshow DJ-Equipment Handbücher

TECshow

TECshow GOBO DERBY UV Bedienungsanleitung

TECshow

TECshow COSMO QUAD 6 DMX Bedienungsanleitung

TECshow

TECshow ALFIE SPOT 2 Bedienungsanleitung

TECshow

TECshow PROTON 6 HEX USB Bedienungsanleitung

TECshow

TECshow COSMO UV Bedienungsanleitung

TECshow

TECshow NEBULA TRI Bedienungsanleitung

TECshow

TECshow octobeam Bedienungsanleitung

TECshow

TECshow Floor TEC Bedienungsanleitung

TECshow

TECshow MadBox 3-in-1 Bedienungsanleitung

TECshow

TECshow HALO 712 XL Bedienungsanleitung

TECshow

TECshow FLOWERTEC 2 Bedienungsanleitung

TECshow

TECshow Mini Bubble Master Bedienungsanleitung

TECshow

TECshow ALFIE HEX Bedienungsanleitung

TECshow

TECshow NEBULA MAX 240 Bedienungsanleitung

TECshow

TECshow TWISTER 360 Bedienungsanleitung

TECshow

TECshow BLAZE SCAN Bedienungsanleitung

TECshow

TECshow ET DUAL Bedienungsanleitung

TECshow

TECshow MAGIC CUBE Bedienungsanleitung

TECshow

TECshow DERBY LITE Bedienungsanleitung

TECshow

TECshow bangtec Bedienungsanleitung

TECshow

TECshow iON 230B Bedienungsanleitung

TECshow

TECshow HALO 80 LED Bedienungsanleitung

TECshow

TECshow HALO 740 XL Bedienungsanleitung

TECshow

TECshow chromatec Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung