TEFAL INTENSE PURE AIR Bedienungsanleitung

INTENSE PURE AIR PU6075K0

www.tefal.com

1800143831/01 22/17

TE_PURIFICATEUR_PU6075K0_1800143831_01.qxp_1800143831/01 02/06/2017 13:41 Page1

Please read the instruction manual and safety instructions

carefully before using the appliance and keep the instruction

manual for reference. For your safety, this appliance complies

with all applicable standards and regulations (Low Voltage,

Electromagnetic Compatibility, Environmental directives etc.).

본 제품을 사용하기 전에 사용 설명서와 안전 지침을 잘 읽

어 보시고 사용 설명서는 참고할 수 있도록 보관하십시오.

안전을 위해 이 제품은 모든 해당 기준 및 규정을 준수합니

다(저전압, 전자파 적합성, 환경 지침 등).

TE_PURIFICATEUR_PU6075K0_1800143831_01.qxp_1800143831/01 02/06/2017 13:41 Page2

6 7 8 9 1110 12

2 4

TE_PURIFICATEUR_PU6075K0_1800143831_01.qxp_1800143831/01 02/06/2017 13:41 Page3

필터분리 및 설치

DISASSEMBLI G/REASSEMBLI G FILTERS

2 5

CLICK !

CCLICK !CLICK !

CLICK !

CLICK !CLICK !

CLICK !CLICCLICK !CLICK !

11 12

TE_PURIFICATEUR_PU6075K0_1800143831_01.qxp_1800143831/01 02/06/2017 13:41 Page4

• Before use, always check that the appliance, plug and power cord are in good condition.

• The appliance must be used in normal conditions of use as defined in this notice.

• Never allow any liquid to get into the appliance.

• Do not touch the appliance with wet hands.

• Never insert objects into the appliance (e.g. needles, etc.).

• Do not cover your appliance.

• f the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

• Your appliance must be unplugged before any maintenance.

• For maintenance and adjustment operations, please refer to the “Maintenance” section.

• Ensure that the air purifier is switched off from the supply mains before removing the guard.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

The electrical facilities of the room, as well as the installation and use of the appliance must comply with

the standards in force in your country.

Do not use your appliance near inflammable objects or products. In general, you should always place the

appliance at least 50 cm away from any object (walls, curtains, aerosols, etc.).

ever place anything on the appliance.

Do not pull on the power cord or the appliance, even when unplugging it from a wall socket.

This appliance is designed for indoor domestic household use only. In case of

professional use, inappropriate use or failure to comply with the instructions, the manufacturer accepts

no responsibility and the guarantee does not apply.

Always unroll the power cord completely before use.

Do not use the appliance in a dusty room or a location where there is a risk of fire.

This appliance must not be used in a humid environment.

ever use the appliance close to a heat source.

The warranty will be invalidated if damage occurs due to incorrect use.

Do not cover the air inlets or the outlet grid.

ever use the appliance in an inclined or horizontal position. Place the appliance on a flat, stable surface.

In the case of prolonged absence: switch the appliance off using the button (9) and unplug it.

SAFETY I STRUCTIO S

RECOMME DATIO S

TE_PURIFICATEUR_PU6075K0_1800143831_01.qxp_1800143831/01 02/06/2017 13:41 Page5

The new ntense Pure Air purifier from Tefal enables you to breathe up to 99.97% pure air in your home and

protects your health with 4 filtration levels as described below. Each level is essential and traps characteristic

pollutants:

OPERATI G PRI CIPLE

DESCRIPTIO

Product description

AAir quality indicator

BAdjustable air outlet grid

CControl panel

DFront door

E Handle

FAir inlets

GParticle sensor

HGas sensor

IPower cord outlet

Control panel lights

1Locked control panel

2Filter change indicator

3onizer function

4Timer / delayed start

5Mode display Auto Day / Auto

Night / Boost / Silent modes

Control buttons

6Light

7Control Panel Lock

8Filter reset

9Start

10 onizer function

11 Timer / delayed start setting

12 Automatic modes / ltration

speed selection

« HOW TO ACHIEVE CLEA ER I DOOR AIR »

n addition to using your ntense Pure Air purifier, here are some tips on how to improve the

quality of your indoor air:

.Ventilate the rooms for at least 10 min. every day, in summer and winter.

.Maintain your ventilation system.

.Limit the use of household products.

.Do not smoke indoors.

.Avoid home fragrances, incense sticks, scented candles, etc.

.Ventilate whenever any work is being conducted in your home and for several weeks afterwards.

.Avoid green plants that are allergenic or need frequent watering.

LEVEL 3:

HEPA F LTER

• Fine particles

(PM2.5)

• Pollen

• Dust mites

• Animal allergens

• Mold

• Bacteria / viruses

LEVEL 4:

NANOCAPTUR F LTER

• Formaldehyde

LEVEL 1:

PRE-F LTER

• Dust

• Hair

• Fur

• Lint

LEVEL 2:

ACT VE CARBON F LTER

• Volatile organic

components (VOCs)

• Odors / gases

TE_PURIFICATEUR_PU6075K0_1800143831_01.qxp_1800143831/01 02/06/2017 13:41 Page6

Place the purifier on a flat, stable surface in the room requiring treatment.

To allow the air to circulate freely, avoid placing the appliance behind curtains, below a window, item of furniture

or shelf unit, or close to any other obstacle, and leave at least 50 cm of free space on each side of the appliance.

Make sure that the plastic packaging protecting the filters has been removed before using the appliance.

Before the first use, ensure the voltage, frequency and power of your appliance suit your electric supply.

Your appliance can operate using an unearthed plug. t is a class (double electrical insulation ).

Before switching on your appliance, ensure that:

- the appliance is completely assembled as described in the safety instructions,

- the appliance is placed on a stable, horizontal surface,

- the appliance is positioned in accordance with the instructions given in this manual,

- the air inlets and the oultet grid are completely unobstructed,

- the 4 filters and front panel have been correctly installed (See section "Disassembling/Reassembling filters").

IMPORTA T: You are advised to switch off and unplug the appliance when not in use.

This appliance is equipped with a device that automatically prevents it from operating if the front door is not

correctly assembled.

Inserting and replacing the filters

This appliance is equipped with 4 types of filters:

NB: For optimum performance of the appliance, only use filters provided by TEFAL.

To replace the filters, follow the instructions in the section “Disassembling/Reassembling filters” .

Please note: certain filters may emit a temporary slight odour, due to the transport and storage conditions.

Connect the power cord and press the start button (9).

Your appliance will be preset to automatic mode the first time you turn it on.

Thanks to its infrared particle sensor and its gas sensor, it detects the level of pollution in the room and

automatically adjusts the filtration speed accordingly in auto day or auto night mode.

The air quality indicator changes color to indicate the air quality in the room.

WHERE TO I STALL THE APPLIA CE

BEFORE USI G THE APPLIA CE FOR THE FIRST TIME

Pre-filter Active carbon filter NanoCaptur filterHEPA filter

SWITCHI G THE APPLIA CE O

Air quality Air quality indicator color

Excellent Blue

Average Purple

Poor Red

TE_PURIFICATEUR_PU6075K0_1800143831_01.qxp_1800143831/01 02/06/2017 13:41 Page7

Setting the pollution sensors

The appliance is preset to medium sensitivity.

f the air quality indicator remains:

- poor after 2 hours in operation although the air seems to be purified

- excellent for more than 1 hour although the air seems to be polluted

you can adjust the sensor sensitivity as follows:

1. When the air purifier is off, hold down the filtration speed setting button for 2 seconds:

2. Set the sensitivity by briefly pressing the filtration speed setting button:

• Select high sensitivity if the air purifier indicates excellent air quality for more than 1 hour although the air

seems to be polluted.

• Select low sensitivity if the air purifier continues to indicate poor air quality even though it has been operating

for more than 2 hours and the air seems sufficiently purified.

3. The new setting is applied if no button is pressed for 10 seconds.

Start

Briefly press this button to switch the air purifier on or off.

Mode / filtration speed selection

Auto day

Automatic: n this operating mode, the filtration speed automatically adjusts according to the air quality detected

by the particle sensor and the gas sensor. This mode is recommended for general use.

Auto ight

The filtration speed of your appliance is adjusted for a whisper quiet air flow during the night. The light intensity

of the appliance is also reduced. f pollution is detected, the filtration speed increases slightly to purify your air

but remains quiet to avoid disturbing your sleep.

Boost mode

The highest speed level of filtration.

Silent mode

The whisper quiet speed.

Light

You can change the light intensity of the appliance as you wish or according to the time of day.

+ Blue + Purple + Red

Low sensitivity Medium sensitivity High sensitivity

OPERATIO

Press Air quality indicator Control panel

1 Light up Light up

2 Moderate light Moderate light

3 Off Moderate light

TE_PURIFICATEUR_PU6075K0_1800143831_01.qxp_1800143831/01 02/06/2017 13:41 Page8

Ionizer function

The ionizer function releases negative ions into the air. This function is switched off by default. To activate it,

briefly press button 10.

Timer / delayed start

If the appliance is on: you can use this button to define the operating duration. Briefly press the button to select

the number of operating hours desired (1, 2, 4 or 8) and the appliance will automatically turn off at the end of

the selected period.

If the appliance is off: briefly press the button to set the appliance to turn on in a certain number of hours (1, 2, 4 or

8).

3D pure air function (adjustable grid)

You can adjust the position of the air outlet grid manually, as desired. For an optimum, even flow of purified air

in the room, set the angle to 45°; for maximum comfort, set the angle to 90°.

Control Panel Lock

The lock system prevents the purifier from being accidentally mis-set during operation.

To activate it, press the button (7) for 3 sec until the locked control panel indicator turns on. To exit this mode,

press the button (7) again for 3 seconds, until the indicator turns off. When selected, the other buttons are locked.

Always switch the appliance off with the button (9) and unplug it before conducting any maintenance

operation.

You can clean the appliance with a slightly damp cloth.

IMPORTA T: ever use abrasive products which could damage your appliance’s appearance.

Filters

This data is based on an average use of around 8 hours per day at lowest speed of Auto Day Mode.

The recommended frequency for cleaning and replacing the filters may vary depending on the duration of use

and the operating environment.

- The light indicates when the pre-filter needs cleaning.

- The light indicates when the active carbon filter needs replacing.

- The light indicates when the HEPA filter needs replacing.

- The light indicates when the color of the NanoCaptur filter needs checking.

• The NanoCaptur filter contains translucent granules which change color according to the formaldehyde absorption

rate. Refer to the color chart on the inside of the panel or the filter itself to establish the filter saturation rate. Once the

saturation rate has reached its maximum, the filter must be replaced. You have to check the filter saturation rate every

six months.

• The pre-filter can be re-used: remove the dust using a vacuum cleaner or wash with water.

CAUTIO :

The appliance's efficiency can be reduced if the pre-filter is not cleaned regularly.

ever use a pre-filter that is still damp.

MAI TE A CE

Filter Action Cycles

Pre-filter Clean Every 2 to 4 weeks

Active carbon filter Replace Every 12 months

HEPA filter Replace Every 3 years

anoCaptur filter Replace Color changing

(see Color chart on filter)

TE_PURIFICATEUR_PU6075K0_1800143831_01.qxp_1800143831/01 02/06/2017 13:41 Page9

The pre-filter is the only filter which can be re-used and washed with water. The HEPA, anoCaptur and

active carbon filters cannot be cleaned and re-used. ever wash with water.

To replace the filters, follow the instructions in the section “Disassembling/Reassembling filters” .

Your replacement filters are available under the following codes:

IMPORTA T: Resetting the filters

The reset light flashes when a filter needs to be replaced. Once the filter has been replaced, hold down the reset

button for 2 seconds .

Forced reset:

f you have replaced a filter before its end of life, force the reset of the filter replacement cycle:

1. Hold the reset button for 2 seconds .

2. Press the reset button briefly to select the filter you have changed.

3. After selecting the filter to reset, hold the reset button for 2 seconds. The electronic meter is then reset.

4. f no button is activated for 10 seconds in forced reset mode, the reset mode is canceled.

Pollution sensors

The particle sensor and gas sensor need to be cleaned regularly (every 2 months) and appropriately.

Make sure you turn off and unplug the appliance before cleaning the pollution sensors and follow the

recommendations below:

1. Clean the air inlet and outlet using a soft brush or cloth.

2. Open the sensor cover located on the right-hand side of the appliance.

3. Lightly wet a cotton swab and remove any dust from the lens and the inlet/outlet. Wipe using a dry cotton swab.

4. Clean the gas sensor using a soft brush or vacuum cleaner.

IMPORTA T:

ever use a detergent or metal object to clean the sensors.

The efficiency of the sensors may be reduced if not cleaned regularly.

Cleaning frequency varies depending on the operating environment of the appliance. If it is used in a

dusty environment, clean the sensors more frequently.

« TIPS FOR CHA GI G FILTERS »

.Avoid handling used filters if you suffer from allergies or asthma.

.Wear gloves when changing the filters, or wash your hands well afterwards.

.Put used filters directly into a closed, air-tight bag before throwing them away to avoid

spreading pollutants.

3 4

Filter Code PU6075

HEPA filter XD6071

Active carbon filter XD6061

anoCaptur filter XD6081

TE_PURIFICATEUR_PU6075K0_1800143831_01.qxp_1800143831/01 02/06/2017 13:42 Page10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TEFAL Luftreiniger Handbücher

TEFAL

TEFAL INTENSE PURE AIR CONNECT PU4085 Series Bedienungsanleitung

TEFAL

TEFAL INTENSE PURE AIR PU4067 Bedienungsanleitung

TEFAL

TEFAL PURE AIR PT3030 Bedienungsanleitung

TEFAL

TEFAL INTENSE PURE AIR PU4065 Bedienungsanleitung

TEFAL

TEFAL Rowenta PURE AIR CITY PU2840 Bedienungsanleitung

TEFAL

TEFAL PURE AIR PT3030 Bedienungsanleitung

TEFAL

TEFAL PURE AIR GENIUS Bedienungsanleitung

TEFAL

TEFAL INTENSE PURE AIR PU4066 Bedienungsanleitung

TEFAL

TEFAL PU4065 Bedienungsanleitung

TEFAL

TEFAL PURE AIR ESSENTIAL PT2530 Bedienungsanleitung

TEFAL

TEFAL PURE AIR PT3040 Bedienungsanleitung

TEFAL

TEFAL Intense Pure Air PU4015 Bedienungsanleitung

TEFAL

TEFAL Intense Pure Air Turbo Bedienungsanleitung

TEFAL

TEFAL INTENSE PURE AIR PU4025 Bedienungsanleitung

TEFAL

TEFAL AQUA BOOST HD402X Bedienungsanleitung

TEFAL

TEFAL PU4026 Bedienungsanleitung

TEFAL

TEFAL Intense Pure Air PU6015 Bedienungsanleitung

Beliebte Luftreiniger Handbücher anderer Marken

IKEA

IKEA UPPÅTVIND Bedienungsanleitung

Nash

Nash AP-1 PureSmart Bedienungsanleitung

LG PH-U450 Series Bedienungsanleitung

DeLonghi

DeLonghi DDSX 220WFA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Bedienungsanleitung

Sharp

Sharp FU-40SE Bedienungsanleitung

Philips

Philips AC2721 Bedienungsanleitung

TruSens

TruSens Z-2000 Bedienungsanleitung

Motorola

Motorola MBP87SN Bedienungsanleitung

Beko

Beko ATP 7100I Bedienungsanleitung

Carrier

Carrier INFINITY 1620 Bedienungsanleitung

AtmosAir

AtmosAir P2002 Bedienungsanleitung

Winix

Winix NK300 Bedienungsanleitung

Friedrich

Friedrich C-90A Bedienungs- und Montageanleitung

Surgically Clean Air

Surgically Clean Air JADE2.0 Bedienungsanleitung

Base aire

Base aire 555 Pro Bedienungsanleitung

Champion

Champion CP25 Bedienungsanleitung

vollara

vollara Air & Surface Pro+ Bedienungsanleitung