Tekkeon MyPower All plus MP3450i Bedienungsanleitung

MP3450i User Guide

EXTERNAL INSTRUMENT BATTERY

USER GUIDE

Contents

Overview ........................................................................................................................................................ 2

Getting Started ............................................................................................................................................... 2

Unpacking myPower ALL Plus ................................................................................................................... 2

Getting to Know myPower ALL Plus........................................................................................................... 3

Storing myPower ALL Plus ........................................................................................................................ 3

Prolonging Battery Life .............................................................................................................................. 4

Charging myPower ALL Plus........................................................................................................................... 4

Charging with a Power Adapter................................................................................................................. 4

Charging with a Solar Panel ...................................................................................................................... 5

Charging through the 6-Pin Input Port....................................................................................................... 6

Using myPower ALL Plus ................................................................................................................................ 6

Select/Connect the Adapter Tip ................................................................................................................. 7

Connect the Power Output Cord ................................................................................................................ 7

Adjust the Voltage Level ............................................................................................................................ 8

Connect the Portable Device ................................................................................................................... 10

Use the USB Port to Charge a 5V Device ................................................................................................. 10

View myPower ALL Plus Battery Capacity................................................................................................ 11

Obtaining Adapters.................................................................................................................................. 12

Using Multiple Batteries................................................................................................................................ 13

Adding the Extended Battery ................................................................................................................... 13

Adding Another Battery ........................................................................................................................... 13

Charging the Extended Battery ................................................................................................................ 14

Accessories .................................................................................................................................................. 14

Troubleshooting............................................................................................................................................ 15

Limited Warranty .......................................................................................................................................... 16

Warning........................................................................................................................................................ 16

Customer Support......................................................................................................................................... 17

2EXTERNAL INSTRUMENT BATTERY

Overview

myPower™ALL Plus MP3450i is a rugged, high-capacity lithium ion battery for use with instruments

or industrial equipment. This universal battery provides instant power for devices that require

between 5V and 19V, and is targeted to users who prefer a fixed voltage that will not be reset upon

disconnection of the connected device. As an added bonus, MP3450i will charge a second smaller 5V

device via the USB port.

myPower™ALL MP3450i can be used alone, with the optional extended battery (MP3450-10) to

double the capacity, or with other myPower ALL Plus batteries to extend the capacity. The extended

battery with mounting brackets is sold separately.

Getting Started

Unpacking myPower ALL Plus

Your myPower ALL Plus package includes the following:

User guide (not shown)

Adapter tip kit with drawstring bag

(5 adapter tips)

Power output cord

Power adapter Voltage Selection

Card

myPower ALL Plus

lithium ion

rechargeable battery

USER GUIDE

Getting to Know myPower ALL Plus

Storing myPower ALL Plus

Lithium ion batteries must be used consistently for maximum performance. Therefore, if you do not use the

battery often, once a month you should discharge and recharge the battery to 40% (if it will be transported)

or 70% (for long term storage), and store it in a cool and dry environment at a temperature between 50°

and 86° F (10° and 30°C). You may permanently damage your battery’s capacity by storing the battery

without any capacity in the cell. It is important that you do not leave the battery in the interior of a vehicle

parked in the sun, or exposed to direct sunlight for extended periods of time.

Capacity Level Indicators

ON/OFF

Switch

DC OUT

for connection

to device

DC IN for connection to

power adapter

Charging/Indicator

MP3450i MP3450-10

USB Port for connection

to 5V device

6-Pin Input Port

for connection to a solar panel or a second battery

Capacity Level

Button

Voltage Setting

(Dip Switch)

Dip Switch Cover

Sunbooster Solar

Charging Port

Sunbooster Solar

Charging Port

4EXTERNAL INSTRUMENT BATTERY

Prolonging Battery Life

Extreme heat and cold will affect your battery’s performance. At temperatures above 80°F (27°C), the

battery will discharge more quickly, and in colder temperatures, the battery won’t charge well. Therefore,

it is recommended that the battery is used at room temperature, or between 68°F to 77°F (20°C to 25°C).

The battery must be used at temperatures between 32°F to 104°F (0°C to 40°C).

It is not recommended that the battery is charged in temperatures above 104°F (40°C), and the battery

capacity may be permanently damaged if you use your battery in temperatures higher than 140°F (60°C).

You may damage the battery even more if you charge the device in these temperatures. You may find that

using the battery in a very cold environment decreases the battery capacity. Unlike the effects of a hot

environment, this is a temporary condition. Once warmed, the battery will return to its previous capacity.

Charging myPower ALL Plus

To charge MP3450i, you can use either the included power adapter, an optional car charger (using the same

charging procedure), or a solar panel. The steps to charge with either of these devices are described in this

section.

Charging with a Power Adapter

myPower ALL Plus will charge in four hours when completely empty. The green CHARGE indicator will

turn on after the battery is 80% charged. Therefore, you should view the actual battery capacity before

disconnecting the power adapter to stop charging. (Before using myPower ALL Plus for the first time,

you must charge the device for four hours.)

1. Plug the power adapter into the DC IN jack on the end of myPower ALL Plus.

2. Plug the power adapter into a wall outlet. The red CHARGE indicator will turn on to indicate the battery

is charging and is less than 80% charged.

3. When the green charge indicator turns on, press the Capacity Level Button to view the battery capacity.

If the capacity does not indicate full (blue LEDs on), continue to charge the battery until

the battery capacity indicates full.

4. When the battery capacity indicates full, unplug the power adapter.

USER GUIDE

NOTE: myPower ALL Plus will automatically shut down the power input when fully charged, so you can

charge it overnight.

Charging with a Solar Panel

You can charge myPower ALL Plus using a compatible solar panel. The solar panel can connect to the

DC IN port, or to the 6-Pin Input Port, depending upon the type of solar panel. The DC IN port is designed for

use with a DC power adapter with constant current input. Charging myPower ALL Plus efficiently requires a

minimum of 1A current output from the solar panel. In general, a 25W or higher solar panel should provide

sufficient power to charge myPower ALL Plus.

The 6-Pin Input Port is designed to allow charging by smaller solar panels (lower than 25W), and requires an

optional Smart 6-Pin Adapter (Sunbooster) available from Tekkeon. To use the solar panel with this port, the

solar panel must have a minimum open circuit voltage of 12V. However, there is no minimum output current

requirement from the solar panel.

6EXTERNAL INSTRUMENT BATTERY

Charging through the 6-Pin Input Port

1. Connect the 6-Pin end of the Smart 6-Pin Adapter into the 6-Pin Input Port on

myPower ALL (shown) and the other end into the solar panel output port.

2. Verify that the charging indicator next to the input jack on the

Smart 6-Pin Adapter (shown) turns on to indicate the battery

is charging.

3. After approximately four hours, press the Capacity Display button

to view the battery capacity. If the capacity does not indicate full

(all blue LEDs on), continue to charge the battery until the battery

capacity indicates full.

4. When the battery capacity indicates full, unplug the connected

charging cable.

Using myPower ALL Plus

myPower ALL Plus can be used to power and/or charge any device that requires between 5 and 19V, plus

a second smaller 5V device like a smart/mobile phone, iPad®or iPod®. With devices that require higher

voltage levels, like laptop computers and portable DVD players, we recommend that you use myPower ALL

Plus only to power the device. You will find that powering without charging your higher voltage device will

maximize the battery life of myPower ALL Plus, thus letting you use your portable device even longer.

To use myPower ALL Plus to power and/or charge your device, take these steps which are described in

detail in the following sections.

 •Selectanadaptertipforyourmaindeviceandconnectthetiptotheoutputcord.

 •ConnectthepoweroutputcordtomyPowerALLPlus.

 •Adjustthevoltageleveltomatchthatofyourdevice.

 •Connecttheadaptertip/outputcordtoyourdevice.

•To the USB port, connect a 5V device using an adapter or the device USB cable (optional).

6-Pin

Port

USER GUIDE

Select/Connect the Adapter Tip

1. Select the adapter tip that fits securely into the power jack on your portable device.

2. Locate the polarity symbol on your device in the area around the power

connector jack:

WARNING: myPower ALL Plus supports Center Positive polarity only. If your device has a Center Negative

polarity, do not power the device with myPower ALL Plus; contact [email protected]

for assistance.

3. Connect the adapter tip to the power

output cord (but not the device).

If you are using a UA-xxx adapter (rather

than PA-xxx), you must insert the optional

adapter PA-L34 (marked “Z”) between

the adapter cord and UA-xxx adapter

as shown.

Connect the Power Output Cord

1. Plug the large end of the power output

cord into the DC OUT jack on the end of

myPower ALL Plus.

L34 Adapter for

myPower ALL Plus

Center Negative

Center Positive

8EXTERNAL INSTRUMENT BATTERY

Adjust the Voltage Level

1. Locate the voltage specification for your portable device. This can be found on the

device power adapter label or device specification label which typically is found on

the bottom of the unit.

(If available, use the voltage specification shown on the power adapter.)

2. Using the voltage chart on page 9, adjust the Voltage Setting (dip switch found under

the rubber cover on the bottom of the battery) to change the output voltage to that

required by your device.

CAUTION: It is important to set the voltage NO MORE than one step higher than

the voltage requirement for the portable device as an incorrect setting may

prevent myPower ALL Plus from working with your device, or may harm your

device in the rare instance that the device accepts the higher voltage. However,

for all devices, adjusting the voltage ONLY one step higher than required

will not harm the device.

NOTE: Please pull the rubber cover gently from the tabbed end.

The other end is permanently connected to the case.

3. To change the voltage, repeat step 2.

TIP: You can optimize the use of myPower ALL Plus with your laptop computer or portable DVD player by

setting the voltage on myPower ALL Plus to less than the required voltage shown on the laptop computer

power supply. This prevents myPower ALL Plus from charging the device, thus extending the amount of

time you can use myPower ALL Plus to power your laptop computer. Most laptop computers have a battery

voltage of 11.1V or 14.8V, allowing them to be powered with 12V or 14V. Therefore, it is recommended that

you set the voltage to 12V first, and then test to see if it will power your laptop. If not, increase the voltage

to the next voltage level, and retest. Repeat this process until you reach the voltage that will power

your laptop.

Dip Switch

Rubber Cover

Sample Power

Adapter Label

USER GUIDE

Most portable DVD players require 9 or 12 volts. Set the voltage to 7.5V and test to see if myPower ALL Plus

will power your device at this setting. If not, increase the voltage by one level and retest.

VOLTAGE CHART

Inhaltsverzeichnis

Andere Tekkeon Kamerazubehör Handbücher

Tekkeon

Tekkeon myPower All plus P3450-10 Bedienungsanleitung

Tekkeon

Tekkeon MP3450-10 Bedienungsanleitung

Tekkeon

Tekkeon MP3450 Bedienungsanleitung

Tekkeon

Tekkeon MP3450 Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Pentax

Pentax Data Back Fc Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Olympus

Olympus PT-EP05L Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung

Tekkeon myPower All plus MP3450i Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken