Tekkiwear V35 Bedienungsanleitung

Sport Camera – V35

User Manual

CAUTIONS

- This is a ultra HD acon camera, It is normal for the housing to exert heat under use.

- Don' t expose the product directly to high temperatures over 45°C.

- Please properly protect well the lens and screen of camera aer using.

- Keep it safe from falling and dropping.

- Keep it distance from any strong magnec interference objects like electrical machine to avoid

strong radio waves that might be damaging the product and aect the sound or image quality.

- In case of overheang, unwanted smoke from the device, unplug it immediately from the power

outlet to prevent hazardous re.

- Keep it safety from children while on charging.

- Stored the device in a cool, dry and dust free locaon.

- Do not modify the camera it in any way,if the camera has been detached,the warranty will be

void.

THE BASIC

1 - Lens

2 - 1.4 inch Front Screen

3 - 2.0 inch Screen / Beauty Buon

4 - Charging Indicator

5 - Working Indicator

6 - Micro USB Port

7 - HD Output Port

8 - Micro SD Card Slot

9 - DC2.5 External microphone

10 - UP / Wi-Fi / Zoom in Buon

11 - Down / Remote / Zoom out Buon

12 - Speaker

13 - Mode / Power Buon

14 - Built-in Mic

15 - Shuer / Select Buon

16 - Baery Door

Tips

- Verify the camera is in Video Mode, Press and hold the Up Buon to turn on/o Wi-Fi.

- Verify the camera is in Video Mode, Press quickly the Down Buon to turn on/o 2.4G RF

Remote.

-Verify the camera is in Photo Mode, Press and hold the Up Buon or Down Buon to Zoom

in/out photo.

-Verify the camera is in Photo Mode, Press quickly the Up Buon to turn on/o Beauty Photo.

GETTING STARTED

HELLO

Welcome to your new camera. To capture video and photo, you need a micro SD card (sold

separately). We strongly recommend to use the branded memory cards purchased from regular

channels for maximum reliability and stability during recording and in high vibraon acvies.

STORAGE/MICRO CARDS

Use brand name memory cards that meet following requirements, we strongly recommend to

use the branded memory cards purchased from regular channels for maximum reliability and

stability during recording and in high vibraon acvies.

- micro SD, micro SDHC, or micro SDXC

- UHS-III rang at least for 4K Video resoluon

- Capacity up to 128 Gb (FAT32)

NOTES:

- Please format the micro SD, micro SDHC and micro SDXC memory card on the camera before

using.

- Please insert the memory card in correct way if not , the card slot maybe damage, by the wrong

way.

- To keep your micro SD card in good condion, reformat it on a regular basis.

- Micro SD card stops recording when the storage of each le is over 4GB and start to record

again on a new le.

- Reformang erases all of your content so be sure to ooad your photos and videos rst.

- Don' t place your Micro SD card near strong magnec objects to avoid data error or loss.

POWERING ON + OFF

To Power On: Press and hold the Power buon for seconds. The camera beeps while the camera

status light is on. When inforrnaon appears on the LCD display your camera is on.

To Power O: Press and hold the Power buon for seconds. The camera beeps, while the camera

status light is o.

OVERVIEW OF MODES

There are 3 modes: Video Mode, Photo Mode, and Playback & Seng Mode.

The modes will appear in following order:

SWITCHING MODE

- Buon Operaon: Tum on the camera, press the Power buon to cycle through camera modes

and seng,

- Touch Operaon: (Only for touch screen cameras version)

1) Turn on the camera, quickly swipe le on the touch screen to to cycle through video Mode ,

Photo Mode, and Playback & Sengs Mode.

2) Turn on the camera and verify the camera is in Video Mode or Photo Mode , quickly swipe

right on the touch screen to switch to the Shortcut Mode, to exit tap the icon X- on the top right

corner of the screen, as shown below:

3) Turn on the camera and verify the camera is in Video Mode:

- Swipe up quickly on the touch screen to switch fast to the Video Seng Mode, to exit, tap the

icon 'X' on the top right corner of the screen , as shown below:

- Swipe down quickly on the touch screen to switch fast to the Vid. Playback mode, to exit tap

the icon "X. on the top right corner of the screen , as shown below:

4) Turn on the camera and verify the camera is in Photo Mode:

- Swipe up quickly on the touch screen to switch fast to the Video Seng Mode, to exit, tap the

icon r on the top right comer of the screen , as shown below:

- Swipe down quickly on the touch screen to switch fast to the Video Playback mode, to exit. tap

the icon on the top right corner of the screen as shown below:

OSD DESCRIPTION:

CUSTOMIZING YOUR CAMERA

Playback & Seng Mode will cycle in following order:

VIDEO SETTING

Buon Operaon:

Verify the camera is in Video Seng Mode, press the Shuer buon to enter the Video Sengs

menu. Then press the UP or Down buon repatedly to cycle through the opons, and press the

Shuer buon to select the desired opon To exit, press the Mode buon again.

Touch Operaon: (Only for touch screen cameras version)

Verify the camera is in Video Sengs, quickly swipe up or down on screen to cycle through the

various opons, and tap the desired opon to set. To exit, tap the icon , on the top right corner

of the screen.

Video Seng Video Resoluon: 4K 60fps / 4K 30fps / 1080P 120fps / 1080P 60fps / 1080P 30fps

/ 720P 240fps Default seng is 4K 30fps.

Note:

- When capturing video at high resoluon or high frame rates such 30fps. the camera may

become hot and consume more power, wich is normal.

- FAT32 format Micro SD card stops recording when the storage of each le is over 4GB and starts

to record again on a new le

EV (Exposure Value): -3 to +3

By defau your camera uses the enre image to determine the appropriate exposure level.

However EV lets you select an area that you want the camera to priorize when determining

exposure. This seng is parcularly useful in shots where an important region might otherwise

be over or underexposed. When you change this seng, the LCD display immediately shows you

the eect on your image. If you change mode, the camera returns to using the enre scene to

determine the correct level of exposure.

EIS (Electronic Image Stabilizaon) On/O

This camera is equipped EIS funcon with 6-axis gyroscope to detect moon changes. When the

camera lts, moves, shakes, the sensor use image cross-border compensaon algorithm to

compensate the change and produce stable videos, especially in acvies with relavely small

angle (about 6 degrees) but fast moon including cycling, motorcycling, and hand-held uses.

Note:

EIS does not support 720P 120f, video resoluon.

- If you turn on EIS, Loop Video, Time Lapse Video, TL Duraion, Slow Moon and Auto Low Light

will not be available automacally.

Loop Video : O / 1min / 5min

When the micro SD card is full, the new les will cover the old one if loop recording is on.

Note:

- FAT32 format Micro SD card stops recording when the storage of each le is over 4 Gb and starts

to record again on a new le.

- If you select Loop Video, EIS, Time-lapse Video, TL Duraon, Slow Moon and Auto Low Light

will not be available automacally.

Time-Lapse Video: O / 1Sec / 3Secs / 5Secs / 10Secs / 30Secs / 1min

Default seng is o. Time Lapse Video creates video from frames captured at specic intervals.

This opon lets you capture a me lapse, event and immediately view or share it as a video.

Select 3 seconds means recording 3 seconds to get one frame per second. For example: If you

select 4K/30FPS and 3 secs, you need to record 90secs, then you can get 1 sec video for

4K/30FPS.

Note:

- Time Lapse Video is captured without audio.

- If you select Time Lapse Video, the camera can not recorded the video over 30 fps.

- If you select Time Lapse Video, EIS, Loop Video, TL Duraon, Slow Moon and Auto Low Light

will not be available automacally.

TL Duraon

Unlimited / 5Mins / 10Mins / 15Mins / 20Mins / 30Mins / 60Mins

Connuously create Time Lapse Video at specic duraon.

If you want to set Time Lapse Duraon, please turn on Time Lapse Video rst.

Slow Moon

On / O Slow moon is an eect in lm-making whereby me appears to be slowed down.

Note:

- If you select Slow Moon, please turn o EIS Time-Lapse Video and Fast Moon rst, then

choose 1080P 60fps / 720P 120fps Video Resoluon.

- If you select Slow Moon, EIS, Time-Lapse Video and Fast Moon will not be available

automacally.

Fast Moon

O / 2x / 4x / 6x / 10x /15x Acon that appears to move faster than normal on the screen,

accomplish by lming the acon at less than normal speed in the camera and then projecng it

at normal speed.

Note:

- lf you select Fast Moon, please turn o EIS, Time-Lapse Video and Slow Moon rst.

- If you select Fast Moon, Time-lapse Video and Slow Moon will not be available automacally.

FOV(Filed of View)

Wide/Medium/Narrow Default seng is Wide. FOV refers to how much of the scene (measured

in degrees, can be captured through the camera lens).

Wind Noise Fteducon

On / O Turn on Wind Noise reducon funcon, it can lower the noise to an acceptable level.

Auto tow Light On / O

Default seng is O. Auto Low Light mode will automacally adjust the brightness in low light

condions to achieve the best low light performance.

Date Stamp: O / Date / Date & Time

If you turn on Date Stamp, this camera adds date/me stamp to the videos you record. If you

turn o Date Stamp, this camera will not add date/me stamp to the videos you record.

PHOTO SETTING

Buon Operaon:

Verify the camera is in Photo Seng Mode, press the Shuer buon to enter the Photo Sengs

menu. Then press the UP or Down buon repeatedly to cycle through the opons, and press the

Shuer bunon to select the desired opon. To exit, press the Mode buon again.

Touch Operaon: (Only for touch screen cameras version)

Verify the camera is in Photo Sengs, quickly swipe up or down on the screen to cycle through

the various opons, and tap the desired opon to set. To exit, tap the icon on the top right corner

of the screen.

Photo Sengs:

- Photo Resoluon: 20M / 14M / 10M / 8M Default seng is 12M

- ISO: Auto / 100 / 200 / 400 / 800 / 1600 / 3200 Default seng is Auto. ISO determines the

camera' s sensivity to light, and creates a trade-o between brightness and resulng image

noise. Image noise refers to the degree of graininess in the image. low light, higher ISO values

result in brighter images, but with greater image noise.Lower values result in lower image noise,

but darker images. When you change this sengthe display immediately shows you the eect

on your image.

- EV (Exposure Value) -3 to +3 by default, your camera u.s the enre image to determine the

appropriate exposure level. However. EV lets you select an area that you want the camera to

priorize when determining exposure. This seng is parcularly useful in shots where an

important region might otherwise be over- or underexposed. When you change this seng, the

LCD display immediately shows you the eect on your image. If you change modes, the camera

retums to using the enre image to determine the correct level of exposure.

- Time Lapse Photo: O / 3Sec / SSec / 10Sec / 30Sec / 1min Time Lapse Photo captures a series

of photos at specied intervals. Use this mode to capture photos of any acvity then choose the

best ones later. Note: If you select Time Lapse Photo, Burst Photo, Delay Timer and Long

Exposure will not be available automacally.

- TL Duraon: Unlimited / 5mins / 10Mins /15Mins / 20Mins/ 30Mins / 60Mins Defauh seng is

Unlimited. Note: If you want to select TL Duraon, please turn on Time Lapse Photo rst.

- Burst Photo: O / 3photos / 5photos / 15Photos / 30Photos Default seng is o. Connuous

shoong can take up to 30 photos in a certain amount of me, making it ideal for fast-moving

events.

If you select Burst Photo funcon, Time Lap, Photo, TL Duraon and Long Exposure will not be

available automacally.

- Delay Timer: 2 sec / 10 sec A Delay Timer gives a delay between pressing the shuer release

and the shuer's ring. It is most commonly used to let photographers to take a photo of

themselves (oen wrth family).

Note: If use Delay Timer funcon. Time Lapse Photo, TL Duraon and Long Exposure will not be

available automacally.

- Long Exposure : O / 1sec / 2sec / Ssec / 8sec / 30sec / 60sec Default seng is o.

Long Exposure is an exposure method that selects a slow shuer speed. Long exposures can

make dark scenes clearer and get fantasc eects. Especially in night vision scenes such as .arry

sky or city night trac, the camera can also take fantasc photos at night.

Note: If you select Long Exposure funcon, Time Lapse Photo, TL Duraon, Burst Photo and Delay

Timer will not be available automacally.

- Date Stamp: O / Date / Date & Time If you turn on Stamp, this camera adds stamp to the

photos you take. If you tum o Stamp, this camera will not add stamp to the photos you take.

SYSTEM SETTING

Buon Operaon:

Verify the camera is in System Seng Mode, press the Shuer buon to enter the System

Sengs menu. Then press the UP or Down buon repeatedly to cycle through the opons, and

press the Shuer buon to select the desired opon. To exit press the Mode buon again.

Touch Operaon: (Only for touch screen cameras version)

Verify the camera is in Photo Sengs, quickly swipe up or down on the screen to cycle through

the various opons, and tap the desired opon to set. To exit, tap the icon , on the top right

comer of the screen.

System Sengs:

- Frequency: 50Hz/60Hz Default seng is 50 Hz.

- Sound: Shuer / Boot-up / Beep / Volume

- Shuer On / O Sets the camera's shuer sound.

- Boot-up: On /O Sets the your camera's power on sound.

- Beep: On/O Sets the camera's operaon sound.

- Volume: 0/1/2/3 Sets the volume of your camera, record sound.

- AE Meter: Center / Mul / Spot Default seng is Center .

In photography, the metering mode refers to the way in which a camera determines exposure.

Cameras generally allow the user to select between center, average or spot metering modes. The

dierent metering modes allow the user to select the most appropriate one for use in a variety

of lighng condions

AWB: Auto / daylight / cloudy / incandescent / uorecent / Snorkeling / Snow Mode

AWB (Auto White Balance) lets you adjust the color temperature of videos and photos to

opmize for cool or warm lighng condions. When you manage this seng, the LCD display

immediately shows you the eect on your image.

Note:

- Snorkeling mode provides color correcon while capturing footage in blue water or clear

freshwater at depths of 5 to 33 (1.5 to 10m)

- Snow mode can suppress overexposure in high-brightness environments such much snow eld

or beach.

Eect: standart / black and white / natural / negave / retro.

Default seng is Normal.

LDC ( Lens Distoron Correcon ) : On / O

Default seng is o. Turn on Distoron Correcon, it can correct the image distoron.

Date St Time: YYMMDD 00:00:00

The date and me are automacally updated when you connect your camera to the iSmart DV

app. However, you can manually change these seng, if needed. Note: • lf the baery is

removed from the camera for an extended period of me, the date and me will be reset

automacally.

• Screen Saver: O / 1min / 3min / 5min Turns o the LCD display aer a period of inacvity to

save baery life. To turn on the LCD display again, press any buon on the camera.

• Upside Down: On/O This seng determines the orientaon of seng menu.

Power O: O / 1min / 3min / 5min Powers o your camera aer a period of inacvity to save

baery life.

• Wi-Fi: On/O Default seng is o.

• RF Remote: On/O Default seng is o.

• Driving Mode: O/On, If you turn on car mode and connect camera with car charger, the

camera will turn on automacally and start recording if you start your car´s engine and the

camera will turn o and stop recording if you Turn o the car' s engine.

Note: Must use a 5V 1A output car charger.

- Using as a dash cam, we suggest to turn on the Loop Video, Driving Mode and Screen Saver at

same me.

- USB MSDC/Web Camera

If you connect this camera to computer, please select MSDC. .

If you want to use this camera as a PC camera, please select 'Web Camera' .

- Reset Wi-Fi: Yes / No This opon can erase the camera' s WiFi data .

- Language: English / Chinese / Italiano / Español / Portugues / Deutsch / Français / PoIski

Sets the language that appears on the camera.

- Format Yes/No

To keep your micro SD card in good condion, reformat it on a regular basis. Reformang erases

all of your content, so be sure to ooad your photos and videos rst To reformat your card, press

Inhaltsverzeichnis

Andere tekkiwear Action-Kamera Handbücher

tekkiwear

tekkiwear H9R Bedienungsanleitung

Beliebte Action-Kamera Handbücher anderer Marken

Epic

Epic STC-EPC1T Bedienungsanleitung

Brinno

Brinno MAC200 DN Bedienungsanleitung

GoPro

GoPro HERO5 Bedienungsanleitung

ION

ION Air Pro 2 Bedienungsanleitung

Firefly

Firefly 6s Bedienungsanleitung

Omni

Omni HERO4 Bedienungsanleitung

nedis

nedis ACAM41BK Bedienungsanleitung

MOFILY

MOFILY YOCAM Bedienungsanleitung

ZERO-X

ZERO-X ZX-10 Bedienungsanleitung

Pyle

Pyle eXpo PSCHD90 Bedienungsanleitung

Action Camera

Action Camera AC32 Bedienungsanleitung

Midland

Midland XTC300 Bedienungsanleitung

Movii

Movii QC-8075 Bedienungsanleitung

Coleman

Coleman C5WP Xtreme Bedienungsanleitung

MCM Electronics

MCM Electronics 82-19749 Bedienungsanleitung

Aim

Aim SmartyCam 3 Sport Bedienungsanleitung

Naxa

Naxa NDC-409 Bedienungsanleitung

Panasonic

Panasonic HX-A1M Bedienungsanleitung

tekkiwear V35 Bedienungsanleitung

Beliebte Action-Kamera Handbücher anderer Marken