Tektronix 5 Series Benutzerhandbuch

5 Series Mixed Signal Oscilloscopes

MSO54, MSO56, MSO58

Installation and Safety Manual

*P071351400*

071-3514-00

5 シリーズ・ミックスド・シグナル・オシロスコープ

MSO54 型、MSO56 型、MSO58 型

インストールおよび安全性に関するマニュアル

5 系列混合信号示波器

MSO54、MSO56、MSO58

安装和安全手册

5 Series Mixed Signal Oscilloscopes

MSO54, MSO56, MSO58

Installation and Safety Manual

www.tek.com

071-3514-00

Supports 5 Series MSO Product Firmware V1.0 and above

protected by national copyright laws and international treaty provisions. Tektronix products are covered by U.S. and foreign patents, issued

and pending. Information in this publication supersedes that in all previously published material. Specifications and price change privileges

reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

FlexChannel and TekSecure are trademarks of Tektronix, Inc.

TekVPI, FastAcq, and e*Scope are registered trademarks of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.

14150 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

■In North America, call 1-800-833-9200.

■Worldwide, visit www.tek.com to find contacts in your area.

Warranty

Tektronix warrants that this product will be free from defects in materials and workmanship for a period of three (3) years from the date of

shipment. If any such product proves defective during this warranty period, Tektronix, at its option, either will repair the defective product

without charge for parts and labor, or will provide a replacement in exchange for the defective product. Parts, modules and replacement

products used by Tektronix for warranty work may be new or reconditioned to like new performance. All replaced parts, modules and

products become the property of Tektronix.

In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration of the warranty period and

make suitable arrangements for the performance of service. Customer shall be responsible for packaging and shipping the defective

product to the service center designated by Tektronix, with shipping charges prepaid. Tektronix shall pay for the return of the product to

Customer if the shipment is to a location within the country in which the Tektronix service center is located. Customer shall be responsible

for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate maintenance and care.

Tektronix shall not be obligated to furnish service under this warranty a) to repair damage resulting from attempts by personnel other than

Tektronix representatives to install, repair or service the product; b) to repair damage resulting from improper use or connection to

incompatible equipment; c) to repair any damage or malfunction caused by the use of non-Tektronix supplies; or d) to service a product

that has been modified or integrated with other products when the effect of such modification or integration increases the time or difficulty

of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE PRODUCT IN LIEU OF ANY OTHER WARRANTIES, EXPRESS

OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. TEKTRONIX' RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND

EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL

NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER

TEKTRONIX OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

[W4 – 15AUG04]

Table of Contents

Important safety information ................................................................................................................................ iii

General safety summary ................................................................................................................................ iii

Service safety summary ................................................................................................................................. v

Terms in the manual ...................................................................................................................................... vi

Terms on the product .................................................................................................................................... vi

Symbols on the product ................................................................................................................................. vi

Preface ............................................................................................................................................................... vii

Key features .................................................................................................................................................. vii

Related documents ....................................................................................................................................... vii

Installing your instrument

Check shipped accessories ........................................................................................................................... 1

Safely rotate the handle ................................................................................................................................. 1

Operating requirements ................................................................................................................................. 2

Input signal requirements ............................................................................................................................... 3

Secure (lock) the oscilloscope ....................................................................................................................... 3

Powering the oscilloscope .............................................................................................................................. 4

Check that oscilloscope passes power-on self tests ...................................................................................... 5

Connecting Probes ......................................................................................................................................... 5

Rackmount information .................................................................................................................................. 6

Getting acquainted with your instrument

Front panel controls and connectors .............................................................................................................. 7

Rear panel connections ............................................................................................................................... 14

The user interface screen ............................................................................................................................ 15

The user interface elements ......................................................................................................................... 16

Badges ......................................................................................................................................................... 19

Configuration menus .................................................................................................................................... 24

The Zoom user interface elements .............................................................................................................. 26

Using the touch screen interface for common tasks .................................................................................... 27

Configure the instrument

Set the time zone and clock readout format ................................................................................................. 29

Download and install the latest firmware ...................................................................................................... 29

Run Signal Path Compensation (SPC) ........................................................................................................ 30

MSO54, MSO56, MSO58 Installation and Safety Manual i

Compensate the TPP0500B or TPP1000 probes ........................................................................................ 30

Connect to a network (LAN) ......................................................................................................................... 32

Operating basics

Add a channel waveform to the display ....................................................................................................... 33

Configure channel or waveform settings ...................................................................................................... 34

Quickly display a waveform (Autoset) .......................................................................................................... 35

How to trigger on a signal ............................................................................................................................ 36

Set the acquisition mode .............................................................................................................................. 37

Set Horizontal parameters ........................................................................................................................... 38

Add a math, reference, or bus waveform ..................................................................................................... 38

Add a measurement ..................................................................................................................................... 40

Configure a measurement ............................................................................................................................ 42

Add a plot of a measurement ....................................................................................................................... 43

Add a Search ............................................................................................................................................... 45

Delete a Measurement or Search badge ..................................................................................................... 46

Change waveform view settings .................................................................................................................. 47

Display and configure cursors ...................................................................................................................... 47

Remote access from a Web browser ........................................................................................................... 49

Connect the oscilloscope to a PC using a USB cable .................................................................................. 50

Cleaning the instrument

Cleaning ....................................................................................................................................................... 51

EMC, safety and environmental compliance

Compliance Information ............................................................................................................................... 53

EMC compliance .................................................................................................................................... 53

Safety compliance .................................................................................................................................. 54

Environmental compliance ..................................................................................................................... 55

Table of Contents

ii MSO54, MSO56, MSO58 Installation and Safety Manual

Important safety information

Safety information provides warnings and cautions that help you operate the instrument safely and keep the instrument in a safe

working condition.

This manual contains information and warnings that must be followed by the user for safe operation and to keep the product in a

safe condition.

To safely perform service on this product, see the Service safety summary that follows the General safety summary.

General safety summary

Use the product only as specified. Review the following safety precautions to avoid injury and prevent damage to this product or

any products connected to it. Carefully read all instructions. Retain these instructions for future reference.

Comply with local and national safety codes.

For correct and safe operation of the product, it is essential that you follow generally accepted safety procedures in addition to

the safety precautions specified in this manual.

The product is designed to be used by trained personnel only.

Only qualified personnel who are aware of the hazards involved should remove the cover for repair, maintenance, or adjustment.

Before use, always check the product with a known source to be sure it is operating correctly.

This product is not intended for detection of hazardous voltages.

Use personal protective equipment to prevent shock and arc blast injury where hazardous live conductors are exposed.

While using this product, you may need to access other parts of a larger system. Read the safety sections of the other

component manuals for warnings and cautions related to operating the system.

When incorporating this equipment into a system, the safety of that system is the responsibility of the assembler of the system.

To avoid fire or personal injury

Use proper power cord. Use only the power cord specified for this product and certified for the country of use. Do not use the

provided power cord for other products.

Ground the product. This product is grounded through the grounding conductor of the power cord. To avoid electric shock, the

grounding conductor must be connected to earth ground. Before making connections to the input or output terminals of the

product, ensure that the product is properly grounded. Do not disable the power cord grounding connection.

Power disconnect. The power cord disconnects the product from the power source. See instructions for the location. Do not

position the equipment so that it is difficult to operate the power cord; it must remain accessible to the user at all times to allow for

quick disconnection if needed.

Connect and disconnect properly. Do not connect or disconnect probes or test leads while they are connected to a voltage

source. Use only insulated voltage probes, test leads, and adapters supplied with the product, or indicated by Tektronix to be

suitable for the product.

Observe all terminal ratings. To avoid fire or shock hazard, observe all rating and markings on the product. Consult the product

manual for further ratings information before making connections to the product. Do not exceed the Measurement Category

(CAT) rating and voltage or current rating of the lowest rated individual component of a product, probe, or accessory. Use caution

when using 1:1 test leads because the probe tip voltage is directly transmitted to the product.

Do not apply a potential to any terminal, including the common terminal, that exceeds the maximum rating of that terminal.

Do not float the common terminal above the rated voltage for that terminal.

MSO54, MSO56, MSO58 Installation and Safety Manual iii

Do not operate without covers. Do not operate this product with covers or panels removed, or with the case open. Hazardous

voltage exposure is possible.

Avoid exposed circuitry. Do not touch exposed connections and components when power is present.

Do not operate with suspected failures. If you suspect that there is damage to this product, have it inspected by qualified

service personnel.

Disable the product if it is damaged. Do not use the product if it is damaged or operates incorrectly. If in doubt about safety of the

product, turn it off and disconnect the power cord. Clearly mark the product to prevent its further operation.

Before use, inspect voltage probes, test leads, and accessories for mechanical damage and replace when damaged. Do not use

probes or test leads if they are damaged, if there is exposed metal, or if a wear indicator shows.

Examine the exterior of the product before you use it. Look for cracks or missing pieces.

Use only specified replacement parts.

Use proper fuse. Use only the fuse type and rating specified for this product.

Wear eye protection. Wear eye protection if exposure to high-intensity rays or laser radiation exists.

Do not operate in wet/damp conditions. Be aware that condensation may occur if a unit is moved from a cold to a warm

environment.

Do not operate in an explosive atmosphere.

Keep product surfaces clean and dry. Remove the input signals before you clean the product.

Provide proper ventilation. Refer to the manual's installation instructions for details on installing the product so it has proper

ventilation.

Slots and openings are provided for ventilation and should never be covered or otherwise obstructed. Do not push objects into

any of the openings.

Provide a safe working environment. Always place the product in a location convenient for viewing the display and indicators.

Avoid improper or prolonged use of keyboards, pointers, and button pads. Improper or prolonged keyboard or pointer use may

result in serious injury.

Be sure your work area meets applicable ergonomic standards. Consult with an ergonomics professional to avoid stress injuries.

Use care when lifting and carrying the product. This product is provided with a handle for lifting and carrying.

Use only the Tektronix rackmount hardware specified for this product.

Probes and test leads

Before connecting probes or test leads, connect the power cord from the power connector to a properly grounded power outlet.

Keep fingers behind the finger guards on the probes.

Remove all probes, test leads and accessories that are not in use.

Use only correct Measurement Category (CAT), voltage, temperature, altitude, and amperage rated probes, test leads, and

adapters for any measurement.

Important safety information

iv MSO54, MSO56, MSO58 Installation and Safety Manual

Andere Handbücher für 5 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Tektronix Prüfgeräte Handbücher

Tektronix

Tektronix MSO54 Referenzhandbuch

Tektronix

Tektronix 519 Bedienungsanleitung

Tektronix

Tektronix TDS1001B Montage- und Wartungsanleitung

Tektronix

Tektronix 791AD Bedienungsanleitung

Tektronix

Tektronix TBS2102 Bedienungsanleitung

Tektronix

Tektronix TDS 600B Installations- und Betriebshandbuch

Tektronix

Tektronix S-2 Bedienungsanleitung

Tektronix

Tektronix 7623A Bedienungsanleitung

Tektronix

Tektronix TCP0150 Bedienungsanleitung

Tektronix

Tektronix 465 Bedienungsanleitung

Tektronix

Tektronix A6312 Bedienungsanleitung

Tektronix

Tektronix 7B53A Bedienungsanleitung

Tektronix

Tektronix TBS1000B Series Bedienungsanleitung

Tektronix

Tektronix TBS1000 Series Benutzerhandbuch

Tektronix

Tektronix DPO70000C Series Bedienungsanleitung

Tektronix

Tektronix TBS1022 Montage- und Wartungsanleitung

Tektronix

Tektronix TDSUSBF Bedienungsanleitung

Tektronix

Tektronix CTRL7100 Series Bedienungsanleitung

Tektronix

Tektronix 567 Bedienungsanleitung

Tektronix

Tektronix 177 Bedienungsanleitung

Tektronix

Tektronix KEITHLEY EC-UPGRADE Bedienungsanleitung

Tektronix

Tektronix TDS 540 Bedienungsanleitung

Tektronix

Tektronix TDS 310 Bedienungsanleitung

Tektronix

Tektronix P6109B Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung