Teleco TIG3000B Bedienungsanleitung

TELECO HUB

INSTALLATION GUIDE AND USER MANUAL

Teleco Warranty Teleco guarantees its products against faulty materials and/or workmanship.

The TELECO warranty is limited to expense-free replacement or repair of

all those parts TELECO deems faulty. The warranty is applied for a 2-YEAR

period starting from the date of product purchase; nevertheless, it shall only

be deemed valid if the customer can produce a written document stating the

date of purchase (invoice or receipt).

The TELECO warranty does not cover:

a. Damage caused by improper installation and/or use and/or

maintenance

b. Damageresultingfromproductmodicationsthathavenotbeen

authorised by Teleco

c. Damage resulting from the use of spare parts that are not Teleco

originals

d. Damage resulting from repairs carried out by personnel who have not

been authorised by Teleco

e. Normal wear of parts

f. Spare part shipping between the customer and the service centre

g. Damage that may occur during transport:

transport-associated risks are always considered to be the customer’s

responsibility

Information Congratulations on choosing Teleco HUB, the ideal interface with which to

remote-control your camper or caravan accessories via a smartphone using

a simple APP. This handbook has been drawn up to provide information on

thetechnicalspecicationsandhowtoinstall,useandmaintainyourTeleco

HUB:

For additional information, please contact your local dealer or:

TELECO s.p.a.

Via E. Majorana 49

48022 LUGO (RA), Italy

Web site: www.telecogroup.com

After-sales service: 899.899.856

TELECO s.p.a. declines all responsibility for any errors contained in this

manual. All information contained herein is up to date at the time of printing

and in line with the above-mentioned revisions. TELECO s.p.a. reserves

the right to make any changes made necessary by the development of its

products.

Contents

List of supplied accessories ....................................................................................................4

Technical characteristics..........................................................................................................4

Indicators and control parts.....................................................................................................5

Installation..................................................................................................................................6

Positioning ..............................................................................................................................6

GSM external antenna (optional) ...........................................................................................6

Connecting to the vehicle battery............................................................................................7

Connection of auxiliary inputs and outputs (optional)..............................................................8

Connection of system-ready Teleco/Telair products (optional)................................................9

Rapid HUB and smartphone conguration.............................................................................11

RapidcongurationoftheBluetoothproximityconnection .....................................................11

RapidcongurationoftheremoteconnectionviaGSM(SMS)...............................................12

HUB and Smartphone detailed conguration.........................................................................15

Bluetooth Connection..............................................................................................................15

Pairing a smartphone for Bluetooth connection ..................................................................15

Deleting the list of smartphones paired for Bluetooth connection .......................................16

GSM connection......................................................................................................................17

Inserting and removing the Micro-SIM card .......................................................................17

ConguringGSMconnection .............................................................................................18

ConguringthenumbersenabledforHUBcontrolviaGSM(SMS)....................................20

Auxiliary controls .....................................................................................................................23

ConguringtheInputs .........................................................................................................24

ConguringtheOutputs ......................................................................................................25

AlarmsandNotications..........................................................................................................26

ConguringtheAlarms........................................................................................................26

CongurationofthetelephonenumberstowhichSMSalarmmessagesaretobesent....27

Tracking...................................................................................................................................30

Troubleshooting ........................................................................................................................31

Recycling: with a view to reducing

disposal of waste electrical and electronic

equipment as much as possible, do not

throw out this end of life appliance together

with other unsorted municipal waste, but

make use of a recycling centre.

List of supplied

accessories

The Teleco HUB package contains the following accessories:

1 Teleco HUB control unit (hereinafter referred to as the HUB)

2 Power supply cable

3 Auxiliary inputs lead

4 Auxiliary outputs lead

5 Installation and use manual

Technical

characteristics

• Power supply: 12 Volt (10-15 V DC)

• Max consumption: 300 mA

• SIM Card connector: Micro-SIM card

• Bluetooth-connectible phones: 4

• Auxiliary outputs: 2 clean 10A 250V AC / 30 V DC contacts

• Inputs: 2 digital channels (internal voltage 12 Volt)

• Dimensions: 147x97x35

• Weight: 200g

Indicators and

control parts

FIG 1

1 Key

Starts and ends the pairing procedure needed to link the HUB to a mobile device (smartphone, tablet etc.)

using Bluetooth technology

2 Red LED (POWER)

Flashes during HUB start up, on when the HUB is ready to work

3 Green LED (GSM)

On when GSM connection is possible (SMS ok, tracking ok)

Flashes when the GSM connection is partial (SMS ok, no tracking)

4 Blue LED (BLUETOOTH)

Flashesbrieyevery3secondswhentheHUBisabletoconnectviaBluetoothwithoneofthepaired

smartphones; on when a smartphone is connected

Duringthepairingprocedure:asheseverysecondwhentheHUBisreadytopair,ashesrapidlywhen

the paired smartphone list is full.

5 GSM EXT/INT

Commutator to select the internal GSM (INT) or external (EXT) antenna

6 GSM

Connector for GSM external antenna (optional, not included in the order)

7 SIM CARD

Slot for insertion of GSM micro-SIM (optional, not included in the order)

Installation ■Positioning

To identify the HUB position that gives the best GSM and Bluetooth

reception proceed as follows:

1. Connect the HUB to the vehicle battery and carry out a Bluetooth

pairingwithasmartphone(see«RapidcongurationoftheBluetooth

proximity connection»)

2. Check the GSM reception quality of the HUB by selecting «SMS» from

the TelecoHUB App Menu and checking that GSM signal quality in the

chosen installation position is good.

3. Check Bluetooth reception quality by moving around inside the vehicle

with your smartphone and checking there are no interruptions in Blueto-

oth connection with the HUB

Make sure the Micro-SIM slot remains accessible.

■GSM external antenna (optional)

TheinternalantennaoftheHUBisusuallysufcienttoensuregood

reception.

Should an external antenna be required, please contact your authorised

Teleco partner/dealer as choosing the wrong antenna may worsen signal

reception.

Should you decide to use an external GSM antenna proceed as follows:

1. Lift the plastic lid that protects the GSM connector (Fig. 1)

2. Connect the antenna to the GSM connector

3. Shift the GSM INT/EXT commutator to the “EXT” external position

4. Check GSM reception by using the TelecoHUB App

■Connecting to the vehicle battery

1) Connect the BLACK wire of the power supply cable to the NEGATIVE

POLE of the vehicle 12 Volt battery, and the RED wire to the POSITIVE

POLE + (be careful not to invert the + and - poles) using 2 cables of a

cross section of 1 mm2. Protect the positive pole with a 3 A fuse near

the battery terminal.

2) Connect the GREEN wire of the power supply cable to the consensus

of the vehicle ignition console (in many cases such consensus is loca-

ted on Pin 15 in the main terminal board) so that whenever the engine

is started this cable receives a positive + 12 V DC voltage.

If this connection is not made the HUB will not be able to send you an

alarm when the vehicle engine is started.

• Warning

The 3-way power connector

(P) must be inserted in the

POWER V DC socket.

Inserting this connector

in any other socket will

irreparably damage the

board and render the

warranty null and void

Black Red

3A fuse

Green

■Connection of auxiliary inputs and outputs (optional)

The HUB places 2 inputs and 2 outputs at the user’s disposal to control

camper equipment/devices.

For example, the inputs could be used to monitor the water and waste water

tanks (Tank full? Tank empty?), or to check if the door and the skylight/

ventilation port are open or closed.

The outputs could be used to switch the lights on and off or to command

unlocking of the camper.

Inputs: 2 digital channels (internal voltage 12 Volt)

1) Connect the IN1 wires of the Auxiliary Input Lead to the

rstinputyouwishtocontrol.

2) Connect the IN2 wires of the Auxiliary Input Lead to the

ends of the second input you wish to control.

Outputs: 2 10A 250 V AC / 30 V DC relays

Common (COM.), Normally Closed (N.C.) and Normally

Open (N.O) contacts are available for every output

1) Use the Auxiliary Output Lead to carry out

connections on the basis of the equipment to be

controlled.

Example:

Magnetic contact for

doors and windows

Example:

Water tank level

indicator

Example: Door lock

Example: Light

Note: IN1- and IN 2- are internally connected to the negative pole of the control center power supply.

■Connection of system-ready Teleco/Telair products (optional)

The HUB allows you to control - with a smartphone - satellite antennas, air

conditioners and power generators that are ready for use with the Teleco

HUB.

●Satellite antenna:

Using a HUB-Bus cable (not included in this order) connect the “SAT

ANTENNA” connector of the HUB to the “Teleco HUB” connector of the IFS

Antenna interface

Compatible satellite antenna models:

• All FlatSat systems starting from serial number 1401560001 (year of sale 2014)

• All InternetSat systems starting from serial number 1401B20001 (year of sale 2014)

• All TeleSat systems starting from serial number 1401A40001 (year of sale 2014)

Not compatible with Elegance and Komfort models.

Note:theantennacontrolunitsmustbeprogrammedwithrmwareinversion70orlater(U70,C70,T70etc.).

Connection with the HUB occurs via the IFS interface.

●Air conditioner:

Using a HUB-Bus cable (not included in this order) connect the “CLIMA”

connector of the HUB to the “Teleco HUB” connector of the ICL Clima

interface

Compatible models: SILENT 5400H-7400H-8400H and DUALCLIMA 8400H-12400H

Connection with the HUB occurs via the ICL interface

IFS

ICL

●Power generator:

Using a HUB-Bus cable (Teleco code...: not included in this order)

connect the “GENERATOR” connector of the HUB to the RJ11 connector

at the rear of the panel of compatible generators

Compatible models: TIG3000B, TIG3000G, TIG3000D

Note: All the products connected to the HUB must have the same earth reference.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Teleco Schalten Handbücher

Teleco

Teleco TV-INTERNET Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch