Telefunken TF-SP4501 Bedienungsanleitung

SMARTPHONE/

СМАРТФОН

TF-SP4501

Instruction manual

Руководство по эксплуатации

Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly

recommended to read this manual carefully before connecting, operating

and/or adjusting the product and keep the manual for reference in the

future.

Table of contents

Before you start

Important safeguards

Health and safety of the user

Power adapter, ports and

connectors

LCD

Cleaning and maintenance

Utilization of the product

Battery

Operation

Control elements

Front panel

Rear panel

General operation

Power on/off

Reboot the device

Inserting and removing SIM card

Connection to the network

Making calls

Status bar

Adding/Removing objects to the

desktop

Wallpaper

Upgrade basic software (OS)

Connections

Connecting to Wi-Fi

3G connectivity

A-GPS

Connect the memory card

Connecting in USB-drive mode

Applications

Installing applications

Deleting applications

List of applications

System setup

The setting menu

The menu «Wireless &

Networks»

Menu «Device»

Menu «Personal»

Menu «System»

General information

Troubleshooting guide

Accessories

Warranty

Specifications

Before you start

Important safeguards

General provisions

• Read attentively this manual to

familiarize yourself with the device.

• Keep this manual handy as a

reference for operating procedures

and precautions. Do not allow the use

of the device by unauthorized persons

who have not read and understood this

instruction manual.

• Usage of the device at

temperatures beyond the operating

temperature range significantly

reduces the life of the screen and other

components of the device and can lead

to failure of the device.

• Avoid strong hitting or shaking of

the housing of the unit.

• Do not place the device near

credit cards, tickets, etc., otherwise the

magnetic cards may be damaged.

• If some incorrect operation of

the device is detected or the device is

overheated, makes uncharacteristic

sounds, smell, emitting smoke or liquid

has been spilled onto it, a qualified

technical maintenance is required.

• Do not use the unit while driving.

Observe the law and traffic rules of the

country of your residence.

• The device must be turned off

during takeoff or landing when used in

an airplane.

• Do not use the device in locations

subject to electronic interference or

static electricity. This can cause data

loss.

• In case the unit fails, contact a

sales representative or nearest service

center.

Health and safety of the user

• Electrical equipment can be

dangerous if used improperly, so

any operation with this device should

always be supervised by adults. Do

not allow children to touch the internal

parts and cables of this device.

• To ensure complete safety, do not

disassemble the casing and do not try

to get inside the unit. Repairs should

be performed by qualified personnel

only.

• Do not spill liquids on the device.

This can cause electric shock. Besides,

if liquid or dust get inside the unit, it

may cause failure, overheating and

smoke. Keep the unit dry.

• Make sure there are no foreign

objects inside the device. They can

cause malfunctions or fire.

• Using headphones at high

volumes can lead to permanent

hearing loss. You can increase the

volume to a level at which sound is

perceived normally and does not

lead to irritation and damage to your

hearing. Set the volume at a safe level.

• If you have a regular ringing in

your ears, reduce volume or stop using

the device.

Before you start

Power adapter, ports and

connectors

• Do not touch the power adapter

with wet hands. This can lead to

electric shock.

• Use only the suppled power

adapter. Using other power adapters

with this unit may cause damage to it.

• The adapter can be connected

only to the type of electrical network

the parameters of which are specified

on the rating label. If you are not sure

of the parameters of power supply and

power adapter, please contact one of

the manufacturer’s authorized service

centers.

• Ensure that the plug the power

adapter is securely inserted into the

power supply socket. Otherwise it may

cause fire.

• Do not step on the AC adapter

cord or place heavy objects on it.

• Do not stretch or tangle the cable.

• After charging, disconnect the

adapter from the wall outlet.

• When unplugging the AC adapter

from the wall pull the plug, do not pull

the cable itself.

• Do not connect the adapter to any

other devices.

• Keep the power adapter out of

the reach of children.

• Do not insert connector plugs

into ports with force. If a plug can not

be easily inserted into the port, maybe

the connector and port do not match.

Make sure that the connector matches

the port and the connector is aligned

with the port.

LCD

Liquid-crystal isplay (LCD) is a

delicate device that requires careful

handling.

• Do not touch the screen with

sharp objects.

• Do not exert strong pressure

on the screen and do not place

any objects on it. This can cause

damage to the display and lead to the

expensive recovery.

• Do not expose the display to

direct sunlight.

Cleaning and maintenance

• Before cleaning the device, make

sure it is switched off.

• To clean the LCD screen and

casing of the device use a soft cloth,

special tissue and special cleaners.

Do not use aerosol sprays, solvents,

alcohol or abrasives.

The manufacturer reserves the

right to make changes in specifications,

appearance, contents of SW and

equipment of the goods unilaterally,

without prior notice.

Utilization of the product

If you want to dispose this product,

do not mix it with general household

waste. There is a separate collection

system for used electronic products

in accordance with legislation that

requires proper treatment, recovery

Before you stert

Before you start

and recycling.

Please contact your local authorities

for the correct method of disposal.

By doing so, you will ensure that

your disposed product undergoes the

necessary treatment, recovery and

recycling and thus prevent potential

negative effects on the environment

and human health.

Battery

Connect the power adapter to the

electric supply network and insert the

adapter plug into the power connector

of the device. While charging the

process is displayed as an additional

“lightning” symbol in the power icon:

. We recommend not to disconnect the

device until the battery is fully charged.

When the battery is fully charged,

the power icon on the screen will be

completely filled.

In order to maintain efficiency

and prolong the battery life, follow the

instructions described below:

• Before first use, it is

recommended to attach the device to

the electric mains for 8-12 hours to fully

charge the battery.

• Do not charge the device at high

temperature.

• Do not recharge the device

too often: you can do this at a time

when the display shows a low level of

charge.

• If you are not using the device

for a long time, recharge the battery at

least once in two weeks, do not wait for

the moment of complete discharge.

Operation

Control elements

Front panel 1

Rear panel 7

1. Proximity sensor

2. Front (additional) camera

3. Display

4. MENU button

5. HOME button

6. RETURN button

7. POWER button

8. Headphones jack

9. Main camera

10. Flash

11. VOL+/- buttons

12. MicroUSB port

13. Speaker

Operation

General operation

Power on/off

• Power on: Press and hold the

power button until the logo appears.

Then there will be splash screen and

main screen. Hold down the icon

and drag it to the right onto the icon

representing an open lock to unlock

the device.

• Sleep Mode: Sleep mode is

convenient for regular use of the

device. In this mode, the device is

active, but the display is turned off at

the same time, and the main screen

is locked. This allows you to instantly

access your operating system, while

at the same time excludes accidental

pressing on the display and saves

energy. To go into sleep mode or out of

it, briefly press the power button.

• Turn off: Press and hold the

power button until a prompt appears

asking to switch off the device. Click

“OK” to shut down.

In case of low battery the unit

can be switched off automatically after

notifying the user about the problem.

Moreover, all unsaved data may be

lost. To avoid this, save your open

documents, close all applications and

connect the smartphone to a power

source.

Reboot the device

If the device is not responding,

restart it by pressing the HOME and

VOL+ buttons at the same time.

Inserting and removing the

SIM card

Turn off the smartphone; remove

the back lid and the battery and unplug

other external power supplies. Insert

the SIM card into the SIM holder as

shown on the panel in the smartphone.

When you need to remove the SIM

card, turn off the smartphone, remove

the battery and then remove the SIM

card from the holder.

Warning: Turn off your

smartphone before removing the SIM

card. Never insert or remove the SIM

card when an external power supply is

connected, as this may cause damage

to the SIM card.

Connecting to the network

Once your SIM card is set, your

phone will search for available network

automatically (the screen will show the

network searching is underway). If your

Operation

phone has found the available network,

the name of network service provider

appears at the center of screen.

If “only for emergency calls”

appears on the screen, it indicates that

you are beyond the network coverage

(service area), and that you can still

make emergency calls depending on

the signal intensity.

This model supports two SIM cards.

You can insert them, foolowing the

instructions above. You can switch

between them by pressing the desired

one in the menu after pressing the

upper left corner of the screen.

Making calls

Dial screen interface:

1. Dialing page

2. Recent calls

3. Contacts

4. Numeric buttons

5. Keyboard

6. Dial/Hang up button

7. Add contact

In the Dial screen, enter a number,

and press the Dial key to make a call.

To change the number, delete the

digits you have entered. During dialing,

the animation appears on the screen.

After the call is picked up, the screen

will show call status information. If

the connection alert tone has been

set, your phone will ring the alert tone

(network dependent).

To end a call, press the Hang Up

key.

Status Bar

At the top of the screen there is

the status bar containing the controls,

the area of system alerts, indicators,

wireless connections, battery indicator

and clock. To access the Quick menu

or see the details of the system when

receiving a notification, click on the

status bar at the bottom right corner,

then click on the icon.

Adding/Removing objects to

the desktop

• Adding a shortcut: Click the

applications menu button in the top

right corner of the main screen, select

1 2 3

5 6 7

Operation

the item you wish to place on your

desktop. Click on the icon for the item

and hold for 3 seconds. Do not take

off your finger from the screen, drag

the icon to a blank space of the active

desktop, release the icon, and it will

lock on the desktop.

You can move any object in the

space of the active screen. You can

not add a new object on the desktop

screen, if the space is filled. Remove

unused objects from the active screen,

or add a new object to another screen

desktop.

• Removing an object from the

desktop: On the Home screen, click the

unwanted item and hold for 3 seconds,

the top of the desktop screen appears

white cross. Do not take off your finger

from the screen and drag and drop it

on the cross when the cross turns red.

Deleting an object from the

desktop will not delete it from your

system. Any object can be restored on

the desktop as described above.

Wallpaper

There are two ways to set the

background image on your desktop

and screen lock:

• On the Home screen, click on a

blank area of the desktop and hold for

3 seconds, select the image available

on the device. Click “Set Wallpaper”.

• On the Home screen, click the

applications menu button in the top

right corner of the main screen, in the

tab “Applications” select “Settings”. In

section “Display” select “Wallpaper”.

Select a picture available on the

device. Click “Set Wallpaper”.

Upgrade basic software (OS)

• In the page of this model on the

manufacturer’s website you can find

the current version and update the OS

(if any). Do not use the OS from other

models, because they are incompatible

and cannot provide full and stable

operation of the device.

• If your device is working properly,

do not update the software, since it is

quite possible, the device has a newer

version of the software.

• Before upgrading/replacing

the OS make sure that the OS is

designed for models with the same

serial numbers as your device (the

serial number is on the back panel of

your device). To perform the upgrade/

replacement of the OS, follow the

instructions posted on the page model

on the manufacturer’s website.

Connections

Connecting to Wi-Fi

• Click the applications menu

button in the top right corner of the

main screen, in the tab “Applications”

select “Settings”. In section “Wireless

& Networks” click Wi-Fi to set into the

ON position.

• Connecting to the network: The

system automatically detects available

Operation

Wi-Fi-networks and displays their

names; select a network you want

to connect and, if necessary, enter

the password. When the connection

is successful, the display shows the

Wi-Fi icon in the notification area. The

number of blue sectors of the icon

shows the level of Wi-Fi signal.

To add a Wi-Fi network to the

list, click “Add Network” in the top right

corner, then use the pop-up keypad

to enter the network name and click

“Save”.

3G connectivity

Insert a 3G SIM-card into the

appropriate slot of the unit. Click the

applications menu button (4) in the top

right corner of the main screen, in the

tab “Applications” select “Settings”. In

“Wireless & Networks” select “More

...”. Click on “Mobile Networks”, put a

tick next to «Modem power» and enter

the PIN-code. In the “Mobile network

settings”, select “Access Point». Select

your access point from the list or

adjust manually. When a successful

connection is performed, icon

appears in the system tray.

When using a device with

3G, while out of network coverage,

you must disable the transmission of

data in order to free the system from

constant attempts to register in the

network. This is recommended to

prevent braking system and a long

battery life.

• Impossibility of 3G-connection

can be caused by the lack of 3G

coverage in place where you are

staing, and in this case it is not a defect

of the device.

A-GPS

• A-GPS function enables you

to determine the coordinates of the

location of mobile devices and display

it on the map. Determination of location

is performed via cellular connection

channel and/or Wi-Fi.

• Click the applications menu

button in the top right corner of the

main screen, in the tab “Applications”

select “Settings”. In “Location services”

put a tick next to the option “Google’s

location service” and remove the

tick for the option “GPS satellites».

Now when you start working with

map application (Google Maps), after

clicking on the icon the map will

display the location of your device.

This unit is equipped with a

GPS module, that allows to determine

your coordinates without connection to

a Wi-Fi network or cellular connection.

Connect the memory card

This smartphone is equipped with

a slot for memory cards microSD. The

maximum supported card capacity

- 32 Gb. After properly installing a

memory card, this device detects it

automatically. To safely remove the

memory card, follow these steps: click

the applications menu button in the

top right corner of the main screen, in

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Telefunken Handy Handbücher

Telefunken

Telefunken TM 140 COSI Bedienungsanleitung

Telefunken

Telefunken S460 Bedienungsanleitung

Telefunken

Telefunken TM 210 IZY Bedienungsanleitung

Telefunken

Telefunken TM 210 IZY Bedienungsanleitung

Telefunken

Telefunken S440 Bedienungsanleitung

Telefunken

Telefunken S540 Bedienungsanleitung

Telefunken

Telefunken S410 Bedienungsanleitung

Telefunken

Telefunken TM350 IZY Bedienungsanleitung

Telefunken

Telefunken TM 28.1 Classy Bedienungsanleitung

Telefunken

Telefunken TM 240 COSI Bedienungsanleitung

Telefunken

Telefunken TM 9.1 CLASSY Bedienungsanleitung

Telefunken

Telefunken TM 110 COSI Bedienungsanleitung

Telefunken

Telefunken TM 360 COSI Bedienungsanleitung

Telefunken

Telefunken S760 Bedienungsanleitung

Telefunken

Telefunken S420 Bedienungsanleitung

Telefunken

Telefunken TM 240 COSI Bedienungsanleitung

Telefunken

Telefunken TM320 IZY Bedienungsanleitung

Telefunken

Telefunken TF-SP4503 Bedienungsanleitung

Telefunken

Telefunken TF-SP4002 Bedienungsanleitung

Telefunken

Telefunken TF-SP5301 Bedienungsanleitung

Telefunken

Telefunken TM 100 COSI Bedienungsanleitung

Telefunken

Telefunken TM 18.1 Classy Bedienungsanleitung

Telefunken

Telefunken TM 230 COSI Bedienungsanleitung

Telefunken

Telefunken TF-SP5301 Bedienungsanleitung

Beliebte Handy Handbücher anderer Marken

Zte

Zte BLADE A520 Bedienungsanleitung

Nokia

Nokia Lumia 620 Bedienungsanleitung

Blackbe;rry

Blackbe;rry KEYone Bedienungsanleitung

Bea-fon

Bea-fon X5 Premium Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 Series Bedienungsanleitung

Blackbe;rry

Blackbe;rry Storm Betriebsanleitung

LG LM-X420QN Bedienungsanleitung

LifeWatch

LifeWatch V Bedienungsanleitung

Bea-fon

Bea-fon SILVER LINE SL860 Bedienungsanleitung

IKI Mobile

IKI Mobile KF4.5i Bedienungsanleitung

Hitech

Hitech HT-850 Bedienungsanleitung

Yezz

Yezz Fashion F10 Bedienungsanleitung

Point Mobile

Point Mobile PM60 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

LG LM-K420EMW Bedienungsanleitung

ISAFE MOBILE

ISAFE MOBILE IS655.2 Bedienungsanleitung