• You can connect the audio output of an
external device to this unit, to listen to the audio
playback of that device through the speaker.
• To connect an external audio device,
please use an AUX audio cable with 3.5mm-
to-3.5 mm plugs to connect the headphone
out or audio line-out of the external device to
the AUX input of this unit.
•The AUX mode will be selected
automatically.
• Turn on the external device. You can
•Wireless audio streaming requires pairing
of a Bluetooth device (e.g. smartphone).
HOW TO PAIR YOUR DEVICE TO
THIS UNIT:
•Make sure the Bluetooth function is
switched on in your device (e.g. smartphone,
tablet).
•Switch on the unit and press the
M button repeatedly to select the
Bluetooth mode (selected by default).
•Once the Bluetooth pairing indicator
begins flashing, you will find the unit listed in
the Bluetooth connections list of your device
(as TF-PS1281B).
•If asked for a passcode, enter “0000”.
•The initial setup is required only once
per device. The unit will automatically pair to
the last paired device.
•The LED indicator will flash when
searching for a Bluetooth device and stay
on when the devices are paired.
•When playing files, you can press the
Play/Pause button to pause and resume
playback.
•Press and hold the - or + button to
go to a previous or next track. Shortly
press these buttons to decrease or
increase volume, respectively.
External device connection
Instruction Manual
4
USB operation
press the - and + to adjust the volume
level.
Slight noise during playback pauses
is not a construction defect, it is
determined by the factory presets of the
dynamic noise reduction system.
Playback
Turn on the device.
• When playing, you can press Play/Pause
to play/pause the playback.
•During the playback you can press and
•
• Insert a USB drive into the USB port.
The playback mode will be selected
automatically.
hold the - or + button to go to a previous or
next track. Shortly press these buttons to
decrease or increase volume, respectively.
It may take up to 60 seconds to open
and verify a large USB drive with many
files.
General USB notes
•This unit is equipped with a USB port
that can read and play MP3, WAV, WMA,
FLAC, AMR files stored on standard USB
drives up to 32 GB.
•FAT and FAT32 file system is supported by
this unit.
Never remove USB drives from the unit
during playback, always stop playback,
then press the M button to switch to another
mode before removing the storage to
prevent damage to your files and drives
themselves.
TWS function
•If you have two units at your
disposal, you can pair them to each other
and enable the True Wireless (TWS)
stereo sound.
•Turn the both units on and
switch them into the Bluetooth mode. Press
the TWS button on any of the units. Make
sure the other unit is not paired to any
bluetooth devices. The TWS button will
light up, indicating that the units are paired
successfully.
TWS works only in Bluetooth mode
and only in featured models.
