Telefunken TTL-700 Bedienungsanleitung

Full Automatic Washing Machine

User's manual

Model:TTL-700

Please read this manual carefully before using.

Retain it for future reference.

Contents

Using process

Names of the parts............................1

Safety precautions ............................2

Special function introduction ............ 4

Installation and adjustment ...............4

Install the water inlet hose.................6

Preparation before washing .............8

Put in the laundries ...........................9

Add the detergent ............................10

Close the top lid ...............................10

Use the operation buttons ................11

Washing finished ..............................15

Disposal after washing .....................16

Packing list Specification...............18

Trouble shooting Answer to

question......................................... 17

Before using

Accessories

Meaning and description of the symbols

Warning sign

Forbidding sign

Contents marked with that symbol

are related to the safety of the

product and the personal safety

of the users. Please operate in

strict conformity to the contents.

Otherwise, it may cause damage

of the machine or injure the

personal safety of the user.

Contents marked with that symbol

are actions forbidden to perform.

Performing of those actions may

result in damage of the machine

or injure the personal safety of

the user.

Lint filter

(one)

Bottom plate

(one)

Water inlet hose

(one)

water inlet

Hose jointer

(one)

ST4X12-A

Tapping screws

(seven)

All the pictures in this manual are sketch-map. And because of the improvement

of product, so the washing machine and accessories which

continual

you received cannot be match

accurately with the sketch map in this manual.

Adjustable foot

Back cover

Cabinet

Control panel film

Control panel

Filter cover

Power line

Pulsator

Inner tub

Detergent box

Top lid B

Water valve

Top lid A

Water absorption cushion

Lint filter(Installed by user)

Names of the parts Before Using

Fixed foot(3)

The end connecting to

the water inlet hose jointer

The end connecting to

the washing machine

Jointer connecting the

water inlet hose and

the water faucet

Adjustable foot lable

Drain hose hook

(one)

In case the washing machine is installed on ground

with carpet, be careful not to block the ventilation hole

with carpet.

Do not put the machine at damp place like the

bathroom. Never wash it with water. Do not

put wet laundries on the control panel coating.

Do not let the machine share one receptacle with other

electrical appliances. If the plugging into the receptacle

is loose, do not use the plug any more.

Do not wash waterproof laundry like the raincoat,

bikecovers, etc. To avoid abnormal

vibrations in spinning.

In normal usage of the washing machine, the power

plug shall be ready to be pulled or plugged with hang.

Be sure to pull the plug off and close the water faucet

when occurring power failure, delivering the machine,

setting the machine idle or cleaning the machine, Do

not plug or pull the power plug with wet hand.

Do not use water with temperature higher than 50

Please plug the plug on special 220V AC receptacle.

Be sure to use threephase power receptacle. Ensure

the earthing prong of the power receptacle is earth-

ed reliably.Use a leakage protector if possible.

50 C

Earth

Do not bend, stretch, twist, bind the power cord by force, or reform it.

Do not press or clamp it with heavy items. If the power cord and power

plug are bad, or the receptacle is loose, be sure to have it replaced by

the technicians of our special shop or our agent,or the customer care

department to avoid any risk.Keep the prong of the power plug clean.If

dust is found on the power plug, please wipe it off with dry cloth.

soft items

The ventilation holes

at the bottom

Before Using

Safety precautions

Before Using

Safety precautions

Do not decompose, repair or alter the machine

by yourself.

Do not put any hot or heavy items (such as the kettle

with hot water ) on the washing machine.

Do not wash laundries with volatile materials

(such as thinner, petrol etc.)

The handicapped or children without care shall not

use the machine.

Keep the machine away from direct sunlight and

heat source like the heater.

Please keep the lint filter in good condition, and

install it to proper position. If the lint filter is lost

or damaged, please contact the local customer

care department of our company.

Petrol

Thinner

Do not put hand into the rotating tub. It is dangerous

even if the rotation speed is slow. Take special care of

the children. Keep children away from the washing

machine to avoid them climbing on.

To protect your laundries and washing machine,

please take out all of the coins, buttons, sand, hairpin

and other foreign materials before washing.

Please check if the water faucet is open, and if the

connection of the water inlet pipe is proper. Hang

up the drain pipe.

It is suggested to use foamless washing powder.

Dismantle

Install

Before Using

Special function introduction

Please install and adjust the machine according to the requirement of the manual. It is

very important to your security and correct operating the machine.

Installation and adjustment

Alarming function when open the cover:

During working except for water and drain, the machine will stop running and

alarm if opens the cover.

Child safety lock program

1. Purpose

Child safety lock program is an added function of the washing machine. The purpose is protecting children

from potential dangerous, which due to children climb onto washing machine and open the top lid, results in

falling into washing tub and drowned. The process of this program as follows: when the child safety lock

program has been started up; then if the top lid is opened, the machine will alarm immediately. If it cannot be

dealt with duly (the way of solving: release child safety lock program), the machine will drain if there has

water in washing tub after 15 seconds. After 10 minutes, the power is off automatically. So this can reach the

purpose of protect children without care from potential dangerous.

2. Start up child safety lock program

The program is optional anytime after the machine has been started. Push and hold PROCEDURE SELECTION

and RESERVATION buttons for more than 2 seconds at the same time. After 2 beep sounds, the child safety

lock program works; all buttons are locked and cannot be selected.

3. Release child safety lock program

Similarly, push and hold PROCEDURE SELECTION and RESERVATION buttons for more than 2 seconds at

the same time. After a beep sound, the child safety lock program is released; all buttons are unlocked.

4. Notice items

# Child safety lock program is an added function. Only when it has been started up, it can work.

# It is necessary for selecting child safety lock program, which the top lid must be closed.

# The top lid cannot be opened after this program has been selected. Once the top lid is opened, the machine

will enter into alarming status. It is necessary to release child safety lock program.

# The child safety lock program can be optional only when the machine has been started.

# After the child safety lock program takes effect, all buttons are locked and cannot be selected. Only when

the program has been released, the buttons can resume its function.

# During start or release this program, the current wash program of washing machine shall not be affected

except for the beep sound.

# The power is off or pull power plug off, the child safety lock program is released automatically. The program

cannot be remembered after the power fails.

Install bottom plateInstall lint filter

After you open the package, please lean the washing

machine gently down on soft items ( like the towel cloth,

blanket, etc. ). Install the bottom plate to the bottom of

the machine with the seven screws by a cross screwdriver,

then lift the machine up gently. See to the figure:

Install

Push lint filter downward to l .ocation for lint filter

Before Using

Usage of the drain hose

The drainage shall be smooth with the drain hose.

1.put the drain hose up to suitable position. Do not put it

on ground

2.Do not step on or press the drain hose.

Notes: the highest point of drain pipe should be higher than

the water level of washing tub for avoiding to siphon

phenomenon during drain.

The distance that washing machine away from wall should be above 20mm. The largest allowed slope of the

shank base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage

of the machine. Please adjust it with following methods:

Adjust the adjustable foot:

Adjust the installation position

1.To twist the adjustable foot, please first lift up

the side of the foot slightly, loosen the adjustable

nut, and twist the foot.

2.Fasten the nut after adjustment.

Loosen

High

Fasten

Adjustable feet

Low

Adjustable nut

Confirm it's horizontal:

Hang the lead line to confirm if it is horizontal.

The highest point

<1.2m

Water faucet, suitable Water faucet, not suitable

It is required that the front end shall be longer than 10cm.

The outlet end surface of the faucet shall be flat and smooth. If not please file it

to avoid leakage.

2.Loosen the screw till the water faucet can be accessed. Put the jointer of the water

inlet hose on the faucet. See to Figure 2. (If the faucet is too large and the jointer can

not be set on the water faucet, please loosen the four screws and take out the

bushing in the jointer. See to the figure.)

1.Press the lower end of the lock lever and push down the slider. Take off the water inlet

hose jointer from the water inlet hose component. See to Figure 1.

Remarks: Before installation, the threading is 4mm above the upper surface of

the nut. After installation, the threading is 2mm above the upper surface of the

nut. See to Figure 6.

4.Take off the nameplate. Twist the fastening nut as per the indication of the figure to

seal up the outlet end surface of the faucet. See to Figure 5.

3.Fasten the four screws evenly. See to Figure 4.

>10mm

Outlet end surface

Nut

About 4mm before twisting

About below 2mm after twisting

Screw

Screwdriver Mark label

Liner

Figure 2

Figure 5

Figure 1

Figure 4

Figure 3

Figure 6

Slider

Water inlet pipe jointer

Water inlet pipe

Locking lever

Before Using

Install the water inlet hose

Confirm the water faucet

Connection between the water inlet hose jointer and

the water faucet

1.Do not take off the water absorption

cushion. Please check if the cushion

is dropped or damaged before each

usage. If it happens please contact

our after-sale department immediately.

2.Put the nut of the water inlet hose on

the valve jointer.

3.Fasten the nut. Swing it gently to

confirm if it's suitable.

1.Close the water faucet.

2.Press the locking lever. Push down the slider. Then

pull of the water inlet hose. If the machine is used

more than once every week, the jointer of the water

inlet hose can be kept on the faucet to prevent

damaging the fixing screw.

1.Swing the hose gently to confirm if it is fastened stable.

2.After installation, open the faucet to check if it leaks.

3.Do not bend the hose with overstrain.

4.Before each usage please check if

the connection between the jointer

of the water inlet hose and the water

faucet, and the installation of the

water inlet hose are firm, so as to

prevent dropping from improper

Installation position.

1.Push down the slider. Insert the

water inlet hose into the jointer.

2.Hang the lock lever to the jointer.

Release the slider till a click

sound is heard.

Locking lever

Slider

Water absorption cushion

Nut of the water inlet hose

Jointer of the water inlet valve

Slider

Jointer of the water

inlet hose

Locking lever

Before Using

Connection between the water inlet hose and the

washing machine

Connection between the jointer of the water inlet

hose and the water inlet hose

Check the connection between the jointer of the

water inlet hose and the water faucet

Dismantle the water inlet hose

Preparation before washing

1. Connect the water inlet hose.

2. Confirm that the washing machine is earthed

reliably. Then insert the power plug into the

receptacle. Do not connect the earth terminal

to the gas pipe and tap water pipe.

3. Hang up the drain hose.

Using process

1 Preparation before washing

Pay attention to followings before washing the laundries

A. Check if the laundries are applicable for washing with the machine.

B. For those desrepaired laundries,wash after mending.

C. Seperate the laundries with unfast color from other laundries.

D. Put those laundries difficult to absorb water into water with hand.

E. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil,

Please apply detergent in advance, which can make it easier to remove the soil.

F. For those laundries that may get lint ball and those with long fur, turn it over before putting in.

G. Do not put those laundries polluted by chemicals directly into the washing machine.

H. For those small laundries and those may get twisting or worn, and woolen/fur laundries, please put them into

Mesh bag for washing.

Confirm if there's

special requirement

for the laundries.

Clear the pocket.

Take out the coins,

sand, hairpins etc.

Fasten the buttons

and zippers.

The quantity of the

laundries shall not

exceed the rated value.

The big laundries like

the jeans shall be put

in loosely.

When the pulsator is

running, the buttons of

the laundries may cause

noise. For the sake of

discretion, please put

the laundries with

buttons into other

laundries.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Telefunken Waschmaschine Handbücher

Telefunken

Telefunken TFL-550 Benutzerhandbuch

Beliebte Waschmaschine Handbücher anderer Marken

Tricity Bendix

Tricity Bendix AW 1000 W Produkthandbuch

Panasonic

Panasonic NA-F60L5WRB Bedienungsanleitung

GE WSLP1500 Handbuch

Electrolux

Electrolux EWF1284EDW Bedienungsanleitung

LG TV2516DV3B Bedienungsanleitung

LG TH2517DSAV Bedienungsanleitung

VESTEL

VESTEL CMH-XL 7510 TE Bedienungsanleitung

AEG

AEG 74335 Bedienungsanleitung

Johnson

Johnson JWF721A Bedienungsanleitung

Beko

Beko WTE7604XLW0 Bedienungsanleitung

Danby

Danby DTT100A1WDB Montageanleitung

Amica

Amica WA 14 Ex Bedienungsanleitung

Daewoo

Daewoo DWD-F1222 Bedienungsanleitung

Bosch

Bosch WAS28461AU Bedienungsanleitung

Miele

Miele PW 6080 Vario Bedienungsanleitung

Finlux

Finlux FLX108CF220 Bedienungsanleitung

Whirlpool

Whirlpool 3LBR5132AN0 Bedienungsanleitung

Beko

Beko WKB 51231 PTMA Bedienungsanleitung