Telenetics FlashPoll DSP9612FP Bedienungsanleitung

The Telenetics®FlashPoll™modems are

designed to optimize communication links

where high speed or an unlimited number of

drops is necessary.

▲

Dual Mode: 9600/4800 bps and FSK

▲

Fast train modem equalizer with

23 msec RTS/CTS delay

▲

DSP design with automatic

adaptive equalizer

▲

Leased-line interface protected with

heavy-duty surge protection

▲

Installs in the Telenetics and

Motorola/UDS RM16M Universal

Data Shelf™.

Document #0074 0502

Telenetics is a registered trademark of Telenetics Corporation. FlashPoll is a trademark of Telenetics Corporation.

The Telenetics FlashPoll DSP9612FP is a dual mode, full-featured 9600

Fast Poll and Bell 202T leased line modem with the fastest training

time in the industry: 23msec RTS/CTS delay. Ideal for utility and

industrial automation multi-dropping applications, including SCADA

systems, traffic automation and oil & gas automation projects, where

an unlimited number of drops is desirable.

The DSP9612FP is a standalone modem designed for 4-wire,

full-duplex or 2-wire, half-duplex operation over a voice-band leased

line. The modem design utilizes the latest digital-signal processing

(DSP) technology to achieve high performance.

In FlashPoll Mode (9600/4800 bps), the DSP9612FP employs

Telenetics’ proprietary modulation and encoding scheme to achieve

fast modem training time. In Bell 202T Mode, the modem is also

backward compatible with Bell 202T (0 – 1800 bps) modems.

Ideal for systems where fast response, short training time and low

throughput delay is required, FlashPoll is optimized for fast receiver

equalizer training and extremely low throughput delay.

The dual mode capability allows the DSP9612FP to communicate with

existing Bell 202T (0-1800, bps) remote modems, which can then be

upgraded at a later date to a Telenetics DSP9612FP FlashPoll

standalone or DSP9612RM Rack Mounted modems (see separate

Data Sheet No 0120 0601).

25111 Arctic Ocean Drive, Lake Forest, CA 92630

Tel: 949.455.4000 Fax: 949.455.4010

For more information on the

FlashPoll and Fast Poll

Modems Series contact

Telenetics at:

949-455-4000 or visit

www.telenetics.com

For more information on the

FlashPoll and Fast Poll

Modems Series contact

Telenetics at:

949-455-4000 or visit

www.telenetics.com

DSP9612FP

The Telenetics®FlashPoll™modems are

designed to optimize communication links

where high speed or an unlimited number of

drops is necessary.

▲

Dual Mode: 9600/4800 bps and FSK

▲

Fast train modem equalizer with

23 msec RTS/CTS delay

▲

DSP design with automatic

adaptive equalizer

▲

Leased-line interface protected with

heavy-duty surge protection

▲

Installs in the Telenetics and

Motorola/UDS RM16M Universal

Data Shelf™.

Mechanical Specifications

Enclosure Aluminum with removable front and rear panel

Dimensions 5.70” wide x 8.30” long x 1.50” high

Weight 1.9 lb.

Interface connectors

Connectors 4-position screw terminal.

2- or 4-wire leased line or metallic circuit

(DC currently not supported)

Data Terminal Equipment DB-25 female connector

RS-232 (DTE) Interface

Signal Name Modem Input/Output DB25 Pin Description

Earth GND 1 Earth Ground

TXD Input 2 Transmit Data

RXD Output 3 Receive Data

RTS Input 4 Request To Send

CTS Output 5 Clear To Send

DSR Output 6 Data Set Ready

(Modem Ready)

SG GND 7 Signal Ground

DCD Output 8 Data Carrier

Detected

DTR Input 20 Data Terminal

Ready (Host Ready)

Note: DCD active indicates that carrier is present and data at RxD is valid. DCD is

not an energy detector.

General Specifications

Data rate 9600 or 4800 bps

asynchronous, +1% - 2.5%

Data format 8 or 9 data bits with 1 or

more stop bits

Line requirement TELCO Voice band 4 or 2 wire

leased line Private metallic

circuits, 26 to 19 AWG

Operating modes 2-wire half-duplex or

4-wire full-duplex

Modulation Telenetics proprietary

Equalizer Automatic, adaptive

Training time RTS to CTS delay, 23 ms

Cable equalizer Fixed transmitter and

receiver cable equalizer,

selectable

Power supply Wide range switching power

supply, 85 to 265V, 50/60

Hz, or 85 to 400VDC.

Optional DC voltage, 10 to

53 volts DC

Surge protection Provided at power line and

leased line

Up to 15KV (Standalone

version)

Carrier Control Constant or switched, DIP

switch selectable

Carrier loss recovery Built-in Train on Data

(typically less than 10 sec)

Receiver Dynamic Range +3 to –30 dbm or –10 to –43

dbm (DIP switch selectable)

Operating Temperature -40ºC to +85ºC

For more information on the FlashPoll and other

FastPoll Series by Telenetics please contact us at:

949-455-4000 or visit

www.telenetics.com

Document #0074 0502

Telenetics is a registered trademark and FlashPoll is a trademark of Telenetics Corporation. All other trademarks are the property of their respective holders.

400 volts DC. The Leased line is protected by heavy duty surge protection

circuitry that can withstand surge voltage of up to 15KV.

Telenetics Corporation

25111 Arctic Ocean Drive

Lake Forest, CA 92630

Tel: 949.455.4000

Fax: 949.455.4010

Diagnostic Features

Front panel L.E.D.. for status monitoring:

Power (PWR) Data carrier detect (DCD)

Request to send (RTS) Data set ready (DSR)

Clear to send (CTS) Analog loopback (ALB)

Transmit data (TXD) Digital loopback (DLB)

Receive data (RXD)

Front Panel loopback control for testing:

Local Analog Loopback (ALB)

Local Digital Loopback (DLB)

Remote Digital Loopback (RDL)

Rear Panel

Andere Telenetics Modem Handbücher

Telenetics

Telenetics MIU/PowerPort 202T Bedienungsanleitung

Telenetics

Telenetics V.3600 Series Bedienungsanleitung

Telenetics

Telenetics MIU Dial or Leased Line modem with RS-485 Bedienungsanleitung

Telenetics

Telenetics Global Carrier 56 Bedienungsanleitung

Telenetics

Telenetics 326X V.34 Series Bedienungsanleitung

Telenetics

Telenetics Flash Poll DSP 9612 Bedienungsanleitung

Telenetics

Telenetics MIU/PowerPort Series 14.4 Original Betriebsanleitung

Telenetics

Telenetics MIU2.4 Betriebsanleitung

Telenetics

Telenetics MIU14.4 Betriebsanleitung

Telenetics

Telenetics MIU56 Bedienungsanleitung

Telenetics

Telenetics 326X V.34 Series Bedienungsanleitung

Telenetics

Telenetics 202T-S Betriebsanleitung

Telenetics

Telenetics Sunrise Series Modular Nest Bedienungsanleitung

Telenetics

Telenetics MOT202T Bedienungsanleitung

Telenetics

Telenetics Flash Poll DSP 9612 Bedienungsanleitung

Telenetics

Telenetics MIU9.6FPD Betriebsanleitung

Telenetics

Telenetics MOT202TRM Bedienungsanleitung

Telenetics

Telenetics V.3600 Series Bedienungsanleitung

Telenetics

Telenetics MIU/PowerPort 202T Bedienungsanleitung

Telenetics

Telenetics MIU202T Bedienungsanleitung

Telenetics

Telenetics OMEGA CDMA Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung