Telit Wireless Solutions GT863-PY Technische Daten

GT863-PY Terminal

Product Description

80269ST10026aRev. 2 - 18/03/08

GT863-PY Terminal Product Description

80269ST10026a Rev. 2 - 18/03/08

This document is relating to the following products:

GT863-PY 3990150471

GT863-PY Terminal Product Description

80269ST10026a Rev. 2 - 18/03/08

Contents

1Overview.......................................................................................................................6

2General Product Description.......................................................................................9

2.1Dimensions .........................................................................................................................9

2.2Weight..................................................................................................................................9

2.3Installation.........................................................................................................................10

2.4Environmental requirements...........................................................................................10

2.4.1Temperature range....................................................................................................................10

2.4.2RoHS compliance......................................................................................................................10

2.5GT863-PY Interfaces.........................................................................................................11

2.5.1Product Versions Identification - Documentation.......................................................................12

2.6Power Supply....................................................................................................................14

2.6.1Supply voltage requirements.....................................................................................................14

2.6.2Power Connector.......................................................................................................................14

2.7General Purpose I/O.........................................................................................................15

2.7.1RJ11 (AUX) connector...............................................................................................................15

2.7.2GPIO Interface Specification .....................................................................................................16

2.8Serial Ports........................................................................................................................17

2.8.1RS232 standard interface connector.........................................................................................17

2.8.2The PC as Data Terminal Equipment (DTE).............................................................................17

2.9SIM Interface Characteristics ..........................................................................................19

2.9.1Insertion and Removal of the SIM .............................................................................................19

2.10Antenna .............................................................................................................................20

2.10.1Antenna Output..........................................................................................................................20

2.11Operating Frequency .......................................................................................................21

2.12Transmitter output power................................................................................................21

2.13Reference sensitivity........................................................................................................21

2.14User Interface....................................................................................................................22

2.14.1Switching the GT863-PY Terminal ON and OFF.......................................................................22

2.14.2Functions of the RJ11 Interface.................................................................................................23

2.14.3SMS...........................................................................................................................................23

2.14.4Real Time Clock and Alarm.......................................................................................................23

2.14.5Data/fax transmission................................................................................................................23

2.14.6Local security management.......................................................................................................24

2.14.7Call control.................................................................................................................................24

2.14.8Phonebook.................................................................................................................................24

2.14.9Characters management...........................................................................................................24

2.14.10SIM related functions.................................................................................................................24

2.14.11Call status indication..................................................................................................................24

2.14.12LED Indicators ...........................................................................................................................25

2.14.13Automatic answer (Data or FAX)...............................................................................................25

2.14.14Supplementary services (SS)....................................................................................................25

GT863-PY Terminal Product Description

80269ST10026a Rev. 2 - 18/03/08

3Software Features......................................................................................................26

3.1Enhanced EASY GPRS Extension ..................................................................................26

3.1.1Overview....................................................................................................................................26

3.1.2EASY GPRS definition...............................................................................................................27

3.2Multisocket........................................................................................................................28

3.3Jammed Detect & Report Extension...............................................................................30

3.3.1Overview....................................................................................................................................30

3.4CMUX.................................................................................................................................31

3.4.1Product architecture...................................................................................................................31

3.4.2Implementation feature and limitation........................................................................................31

3.5Easy Script Extension - Python interpreter ...................................................................32

3.5.1Overview....................................................................................................................................32

3.5.2Python 1.5.2+ Copyright Notice.................................................................................................34

3.5.3Python implementation description............................................................................................35

3.5.4Python core supported features.................................................................................................37

3.5.5Python Build-in Custom Modules...............................................................................................37

3.6SAP: SIM Access Profile..................................................................................................38

3.6.1Product architecture...................................................................................................................38

3.6.2Implementation feature..............................................................................................................38

3.6.3Remote SIM Message Command Description ..........................................................................38

3.7AT Command Interface ....................................................................................................40

4Service and SW / Firmware Update ..........................................................................41

4.1Step-by-Step upgrade procedure....................................................................................41

5Conformity Assessment Issues................................................................................44

5.1Declaration of conformity...............................................................................................45

6GT863-PY Technical Support....................................................................................46

7SAFETY RECOMMENDATIONS.................................................................................47

7.1Disposal of this product in the European Union...........................................................48

8List of Acronyms........................................................................................................49

9Document Change Log..............................................................................................51

GT863-PY Terminal Product Description

80269ST10026a Rev. 2 - 18/03/08

DISCLAIMER

The information contained in this document is the proprietary information of Telit Communications

S.p.A. and its affiliates (“TELIT”). The contents are confidential and any disclosure to persons other

than the officers, employees, agents or subcontractors of the owner or licensee of this document,

without the prior written consent of Telit, is strictly prohibited.

Telit makes every effort to ensure the quality of the information it makes available. Notwithstanding

the foregoing, Telit does not make any warranty as to the information contained herein, and does

not accept any liability for any injury, loss or damage of any kind incurred by use of or reliance

upon the information.

Telit disclaims any and all responsibility for the application of the devices characterized in this

document, and notes that the application of the device must comply with the safety standards of

the applicable country, and where applicable, with the relevant wiring rules.

Telit reserves the right to make modifications, additions and deletions to this document due to

typographical errors, inaccurate information, or improvements to programs and/or equipment at

any time and without notice. Such changes will, nevertheless be incorporated into new editions of

this document.

GT863-PY Terminal Product Description

80269ST10026a Rev. 2 - 18/03/08

1 Overview

Aim of this document is the description of features, functions and interfaces of the Telit GT863-PY

Terminal which is a complete modem solution for wireless m2m applications based on the GE863-

PY core. Since this Terminal is ready for use as a subsystem for wireless connections, Safety

Information and basic instructions for taking the GT863-PY into operation are included, as well as

guidance to other documentation and practical hints for the first steps.

The Telit GT863-PY Terminal is GSM Mobile Stations (MS class B) capable of using the GSM

Circuit Switched Data (CSD), Fax and Short Message Services (SMS).

NOTE: Telit GT863-PY Terminal is an evolution of EZ10-PCS with PYG option and EZ10-QUAD-

PY fully compatible with the previous models.

The frequency bands and GPRS class are reported in the following table:

Frequency Bands GPRS RJ11 AUX

Connector Product Name

GSM-850 / EGSM-900 / DCS-

1800 / PCS-1900 MHz Quad-

Band Class 10 GPIO Telit GT863-PY

The embedded PYTHON engine allows to perform stand-alone operations with the EASY SCRIPT

feature, interpreting user-defined scripts in PYTHON language, e.g. to read external sensors

connected to the General Purpose Inputs / Outputs (GPIO) on the RJ11 connector. Refer to the

chapter about Software Features in this Product Description.

GT863-PY Terminal Product Description

80269ST10026a Rev. 2 - 18/03/08

The following table summarizes the possible interface configurations (for details refer to the

dedicated chapters of this document):

GT863-PY

(GPIO & PYTHON)

RS232 Serial Interface for AT commands,

data, fax, SMS YES

POWER 12V DC YES

AUX RJ11 6-pin configuration GPIO:

GND

GPIO 4,

GPIO 6 / Alarm

GPIO 7 / Buzzer

GPIO 5

Vmod (3,8 V DC)

Remarks:

•Automatic POWER ON.

•GPIOs can be configured as I2C or SPI

bus by PYTHON script elements.

The GT863-PY allows to be remotely controlled by AT commands (GSM 07.07 and 07.05) and the

connection to the host controller (Data Terminal Equipment DTE) is established through one

RS232 standard port. This port serves also for serial bi-directional Data and Fax transfer.

All the interfacing is done by 4 connectors placed on the front and rear panels.

The Quad-band evolution Telit GT863-PY includes features like sensing of hot removal of the SIM,

the higher upload speed of the GPRS Class 10 Packet Data transfer and the entire structure

results in a RoHS compliant product.

EASY GPRS® Embedded

Telit GT863-PY embeds TCP/IP stack and DNS query protocol. Static and dynamic IP allocation,

PPP and UDP as well as FTP Client are supported. Developers just need to add Telit Proprietary

AT commands to establish a TCP/IP connection through the GPRS network.

EASY FREQUENCY SCAN® Function

Telit GT863-PY includes a dedicated set of AT commands to scan all the GSM channels, reporting

all available parameters. With EASY FREQUENCY SCAN® the GSM network coverage at the

location of the GT863-PY Terminal can be examined even without inserted SIM in order to select

the provider with the best field strength, the most channels or base transceiver stations and to

optimize the antenna position.

EASY SCRIPT® Function

Telit GT863-PY includes a dedicated set of AT commands to run scripts in PYTHON1language

within the module. By using this EASY SCRIPT® feature, the script inside the module interacts

with the interfaces, allowing other tasks to interrupt it. The script interpreter engine of Telit GT863-

PY is allowing self controlled operations.

With the Telit GT863-PY it is possible to configure the available GPIOs 4-7 as I2C or SPI bus.

1PYTHON is a registered trademark of the Python Software Foundation.

GT863-PY Terminal Product Description

80269ST10026a Rev. 2 - 18/03/08

JAMMING DETECTION and REPORT

The Telit GT863-PY offers the Jamming Detection and Report functionality, which allows the unit

to detect attempts to discontinue GSM communication by interfering with the GSM radio signal.

The “Jammed” status is reported as unsolicited message through the AT-Command interface on

the RS232 connection.

CMUX

CMUX ( Converter-Multiplexer) is a multiplexing protocol implemented in the Telit module that can

be used to send any data, SMS, fax, TCP data.

SAP (SIM Acess Profile)

The SAP feature allow the module to use the SIM of a remote SIM Server. This feature is

implemented using special AT Command on a Virtual circuit of the CMUX interface.

Multisocket

New functionality of the Telit modules, multisocket is an extension of Telit Easy GPRS feature,

which allows the user to have two contexts activated (that means two different IP address), more

than one socket connection (with a maximum of 6) and simultaneous FTP client service

The GT863-PY is compliant with the relevant parts of ETSI GSM Phase 2+ specifications (Normal

MS). Furthermore, Telit GT863-PY is certified after the full conformity assessment against 1995/5

EC and R&TTE Directive and they don’t require any further certification test effort and expense.

The Terminal GT863-PY can be used in all EU countries and in other countries where a GSM-

850/E-GSM-900/DCS-1800MHz or PCS 1900 MHz network is available.

It is necessary to insert a SIM (Subscriber Identity Module) on which the level of worldwide access

to the services of the related GSM/GPRS network depends.

GT863-PY Terminal Product Description

80269ST10026a Rev. 2 - 18/03/08

2 General Product Description

NOTE: The illustrations in this Product Description are only schematic and do not assure fidelity to

construction or layout details, finishes, writings or colours.

2.1 Dimensions

The Telit GT863-PY dimensions are:

•Housing Length: 83 mm (without connectors)

•Overall Length: 107 mm (including fixtures)

•Width: 64 mm

•Thickness: 33 mm

See the following figure: 99 mm

95 mm

107 mm

64 mm

33 mm

2.2 Weight

The net weight of the Telit GT863-PY is 135 grams.

GT863-PY Terminal Product Description

80269ST10026a Rev. 2 - 18/03/08

2.3 Installation

The Telit GT863-PY can be fixed on a suitable surface by two screws through the holes (3,3 / 5,8

mm diam.) in the lids forming part of the front and rear panels. The figure shows the maximum and

minimum inter-axis distance between the fixing holes.

In case of a permanent vertical installation in dusty environment, it is recommended to cover the

SIM slot with a self-adhesive tape.

2.4 Environmental requirements

The Telit GT863-PY is compliant with the applicable ETSI reference documentation GSM 05.05

Release1999 ETSI EN300910 V8.4.1

2.4.1 Temperature range

GT863-PY Note

–20°C ÷+55°C Full function; Full

specification compliance

Operation temperature –20°C ÷+70°C Full function*

Temperature in not functional

conditions –30°C ÷+85°C

* Temperature outside the –20°C ÷+55°C range can affect the sensitivity, the performance and the MTBF of

the terminal.

2.4.2 RoHS compliance

The GT863-PY is fully RoHS compliant to EU regulation.

Inhaltsverzeichnis

Andere Telit Wireless Solutions Touch-Terminal Handbücher

Telit Wireless Solutions

Telit Wireless Solutions GT863-3GG Technische Daten

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung