Tellur Dash Patrol DC1 Bedienungsanleitung

Dash Patrol DC1 &DC2

FullHD Dash Cam

User manual

TLL711001/TLL711002

This manual is available in more languages on www.tellur.com/manuals

Thank you for choosing Tellur!

Please read this user manual carefully before using the

product and keep it safe for future references.

Please note! Any damage caused by misuse of the product

will void the product’s warranty.

Safety instructions

By using this recorder, you conﬁrm that you have read and

agree to our terms of use.

Please pay attention to all warnings below:

1.Please follow all instructions of use as written in this

manual.

2.Protect the power supply from being trampled or

squeezed, especially the plug, socket and the external

power cord of the equipment.

3.Please leave all maintenance work to qualiﬁed person-

nel. If the product is damaged (such as: damages due to

falling, broken plug, liquid splash or other objects fell onto

the product) or doesn’t work properly, please ask a quali-

ﬁed personnel to repair it before using it again.

4.Do not disassemble, open, squeeze, bend, change shape,

pierce, cut it and prevent falling of the product.

5.Use factory’s standard charger.

6.Please ﬁnd a professional to modify the power line.

Warning!

The working environment of this camera is -10~600C. Too

low or too high temperature will lead to the constant failure

of this recorder. Please turn on the air conditioner, adjust

the temperature in the car and then turn on the dash cam.

Product diagram

1. 3M adhesive for bracket;

2. GPS module (only for DC2)

3. Lens;

4. Speaker;

5. GPS data upgrade interface (only for DC2);

6. Bracket rotating shaft;

7. Memory card slot;

8. Microphone;

9. Mode button;

10. GPS module speaker (only for DC2);

11. Power and work indicator;

12. Menu button;

13. Up;

14. Down;

15. OK/Conﬁrm;

16. Power supply interface bracket;

17. USB port;

18. Reset button;

19. Power button.

Before use

1.How to insert the memory card - please insert the memory

card in the correct position as indicated by the memory card

gap on the device. Press the memory card until the card is

fully inserted and you hear a click.

Note: Please use a high-speed memory card (CLASS10 or

above) since the recorder's video storage runs faster on the

card.

2.How to take out the memory card: press the memory card

into the memory card slot and the card will pop out.

3.For best performance, format the microSD card. When you

use the memory card for the ﬁrst time, make sure you format

it. Also, to keep the card working properly, don’t forget to

format it regularly.

Note: Before formatting the microSD card, make sure to copy

all of its contents. Formatting the memory card will erase all

the data from your card.

4.How to format the memory card: press the [Menu] key once,

then short press again the [Menu] key, press the Up/Down

keys to ﬁnd the format menu, press [OK] to conﬁrm the

format is complete, press the [Menu] to exit the menu.

Note: when starting up, the camera needs to be connected to

the power supply to start automatically. After starting up, the

camera will record automatically. Please press [OK] to stop

recording before setting the menu.

Warning: please make sure the camera is off when inserting

or unplugging the memory card, otherwise it can cause

damage to the camera or memory card.

Camera installation

1. Clean the front windshield with a cloth (ﬁgure 1).

2. Tear the 3M adhesive protective tape on the bracket (as

shown in ﬁgure 2).

3. Connect the car charger to the cigarette lighting port (as

shown in ﬁgure 3).

4. Stick the bracket with the sticker removed on the wind-

shield of the car (ﬁgure 4).

5. Tear off the protective ﬁlm on the display screen of the

recorder.

6. The recorder bracket is connected to the host by a

magnet.

7. Connect the USB terminal of the car charger with the USB

terminal of the recorder.

8. Tear off the protective ﬁlm on the lens.

Note: you can adjust the video angle according to your pref-

erences.

Change the bracket’s position (45°) to adjust the video angle

of the front lens (suggestion: the front part of the lower

picture accounts for 1/3 of the picture, and the sky point of

the upper picture accounts for 1/3).

Warning: While driving, for your safety and your passengers’

safety, please keep your eyes on the road, not on the display

of the recorder.

Note: you can adjust the video angle according to your pref-

erences.

Change the bracket’s position (45°) to adjust the video angle

of the front lens (suggestion: the front part of the lower

picture accounts for 1/3 of the picture, and the sky point of

the upper picture accounts for 1/3).

Warning: While driving, for your safety and your passengers’

safety, please keep your eyes on the road, not on the display

of the recorder.

Display status and information

1. The section time icon of loop video recording indicates

that the cyclic video recording time is 1 minute. You can

choose between: 1min, 3mins, 5mins. After shutdown, each

video lasts for 5 minutes and the device stops recording

when the microSD card is full.

2. [00:00:05] When in white font: remaining video time on

memory card. When in red font: current video duration;

After inserting the memory card, the recording time on the

remaining space of the memory card will be displayed in

white font while in standby state.

After inserting the memory card, the current video duration

will be displayed in red font while in recording mode.

3. The icon is displayed when the video locks. When g-sen-

sor activates it or you manually press the lock key, the key

icon will be displayed on the screen, indicating the current

video is locked.

4. [P] Parking guard icon. The camera displays this icon only

when the parking guard function is on. The camera will auto-

matically start up and lock for 15 seconds after receiving

external vibration.

5. [1080 FHD] Video resolution icon. Displays the current

selected video resolution

6. Movement detection icon. When the icon is displayed on

the left side of the screen, the feature is enabled.

7. Exposure compensation icon. Displays the exposure

compensation value adjusted during current video recording.

8. Audio recording ON icon. Audio recording OFF icon.

Turn ON or OFF the audio recording function in the settings

menu. During recording, press the button to quickly open and

close the recording.

9. Gravity induction icon. The screen will display after

opening gravity induction. This indicates that during record-

ing, when the external vibration exceeds the set value, the

current recording video will be locked and saved as a ﬁle that

cannot be deleted or overwritten

10. Storage card status display icon. The icon is displayed

after inserting the memory card. Memory card was not

inserted.

11. Icon of battery power and status. Displays the current

state - connected to car charger. Displays current battery.

12. GPS status icon (only available for DC2). After inserting

the GPS module into the recorder, the speed will be displayed

after searching the signal.

13. [ 00：00：05] Time. Displays the current standard time.

Please initialize it before use.

14. [2018/01/01] Date. Displays the current standard date.

Please set it before use.

15. [0 km/h] Current speed (only available for DC2). After the

camera searches for GPS signal, the current speed is displayed.

Setting the Time and Date:

1. Since the camera automatically starts recording when you

start up the car, ﬁrst you have to press [OK] to pause the

recording. The recorder will enter standby state.

2. Then press to pop up the menu, and then press again.

Select Date/Time by pressing down or up, then press [OK]

to enter the Settings.

3. Adjust the value by pressing or keys, select the value,

then press [OK] to conﬁrm the selection and enter the next

ﬁeld. Press to exit after you ﬁnished setting up the date and

time.

Taking a photo with the recorder

When the recorder is in standby mode, press [M] once to

switch to the camera mode. Press [OK] to take a picture. When

taking a picture, the screen ﬂashes once, indicating that the

picture is taken.

Video/photo playback

In the recording state, press [OK] power button to stop

recording. Press [M] key twice to switch to playback mode,

and the playback icon will be displayed in the upper left

corner of the screen.

Move thru ﬁles on the memory card by pressing or keys.

Press [OK] to play or view the selected ﬁles. Press [OK] again

to pause the playback.

Settings menu

1. If you are recording, press [OK] to stop.

2. Press the key once to bring up the settings menu, and

short press the or keys to turn over the menu.

3. Select the menu options to be changed and press [OK] to

enter.

4. Press the button to exit.

Special features:

1. Gravity induction function

Press the key once to bring up the settings menu, then

press the button to ﬁnd the gravity-sensing option, and

press the [OK] button to enter the change (the recommend-

ed state of selection). When the gravity induction is on, the

camera will automatically save the video during recording as

a non-erasable ﬁle. The icon will appear on the screen

after you activated it.

Note: if the gravity induction state is set too high, there will

be too many ﬁles on the microSD card, making the camera

unable to record.

2. Parking monitoring function

After the parking monitoring is activated, when the vehicle is

turned off and the recorder automatically enters the shut-

down program, if it detects a vibration generated by external

forces, the dash cam will automatically start up and record,

then automatically shuts down after 20 seconds. When the

vibration is detected again, the camera function is activated

again.

Note: To set up the parking monitoring function, you must

connect the recorder to the power supply and allow the

recording to automatically start. After you set up the parking

monitoring, this function can be activated only after the

power is off and the recorder automatically shut down.

3. Motion detection function

When the motion detection is turned on, the camera will start

recording when an object is detected to be moving. The

motion detection starts in 10 seconds. The second detection

will continue to record in 10 seconds. When you detect an

object moving again, start the camera again!

4. USB mode

Connect the USB cable to the computer, the auto data record-

er will automatically pop up the USB menu, and the following

options will appear:

1.Storage 2. PC Cam

Video or photo ﬁles that are stored on the microSD card can

be accessed in this mode.

Select this mode and the USB video device will pop up. It can

take photos or video in real time, so you can use it as a PC

camera.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tellur Dashcam Handbücher

Tellur

Tellur Dash Patrol DC3 Bedienungsanleitung

Beliebte Dashcam Handbücher anderer Marken

Cansonic

Cansonic UltraDuo Z2 Bedienungsanleitung

Gazer

Gazer F720 Bedienungsanleitung

HP f500g Bedienungsanleitung

Xblitz

Xblitz TANGO 4K Bedienungsanleitung

Rexing

Rexing M1 Bedienungsanleitung

Maka Technologies

Maka Technologies Marbella MXPro Bedienungsanleitung

NESA

NESA NRC-80DLM Montage- und Bedienungsanleitung

Kaiser Baas

Kaiser Baas R20 Bedienungsanleitung

Boyo

Boyo VTM43TC Bedienungsanleitung

Minolta

Minolta MNCD37 Bedienungsanleitung

Thinkware

Thinkware FA10 Bedienungsanleitung

Momento

Momento MD-5200 Bedienungsanleitung

BlackVue

BlackVue DR590X-1CH Bedienungsanleitung

HP F300 Bedienungsanleitung

CammSys

CammSys BlackSys BH-300 Bedienungsanleitung

Snooper

Snooper DVR-2HD Bedienungsanleitung

Lukas

Lukas Q900 Bedienungsanleitung

RVS

RVS 450C Bedienungsanleitung