EN
Thank you for choosing Tellur products!
To ensure an optimum performance and safety, please
read this user manual carefully before using the product.
Keep this user manual safe for future references.
1. GENERAL SAFETY INFORMATIONS:
1.1 WARNINGS
• We recommend that the installation be done by qualified
personnel.
• Make sure to switch off the electric power supply before
installing or maintaining the product!
• Make sure you have prepared the necessary tools suitable
for assembly, disassembly.
• Make sure that the devices connected do not exceed the
maximum operating output of the plug (3600W, 16A max)
• Your existing wires may have different colors than those
shown in the diagram. Make sure you know for sure the
function of each wire.
• Respect the technical specifications of the product and do
not use it outside the declared operating parameters.
1.2 ATTENTION
• To avoid wiring damage or abrasion, do not expose the wire
to edges of metal or other sharp objects.
• Do not install the product in an installation that exceeds the
maximum output limit, 3600W 16A.
• Don’t use the product if it is damaged in any way, shape, or
form.
• Don’t attempt to repair, disassemble, or modify this
product.
• Don’t place the product near any heat source or in direct
sunlight.
1.3 NOTES
• The Smart wall plug is designed only for single-pole
installation use and will require Neutral and Ground wires.
• In case of power source cut off, when energy is restored,
the wall plug can be set in APP to remain ON/OFF or
remember last state.
• USB and Type-C port are independent of AC output.
The ports are powered ON only when detects output
consumption bigger than 50mAh.
1.4 IMPORTANT NOTES ABOUT WIFI SMART CONTROL
WITH TELLUR SMART APP
• Make sure you have an active 2.4GHz Wi-Fi internet
network, and you have access to Wi-Fi password.
• This device is compatible with 2.4GHz Wi-Fi networks only.
5GHz Wi-Fi is not supported. If you don’t have 2.4GHz Wi-Fi
network available, check the router settings, contact a
specialized technician or the internet provider for support.
• The app does not support Wi-Fi 6 networks with 802.11ax
standard. Please set the 2.4GHz Wi-Fi network to
802.11b/g/n.
• No special gateway or HUB is required to remotely control
the product via Wi-Fi.
• Wi-Fi passwords should not include special characters
such as ~! @#$%^&*().
• Make sure your Wi-Fi internet is stable and the signal is
strong enough in the installation location.
