Call Indicators (A)
This indicator will light up when a Call message is received.
Call Keys (B, J)
Each channel includes a Call key which is available when either a partyline or a point to point contact is
assigned to a channel. Pressing this key will trigger a call message to other intercom devices assigned to
the same partyline, or the other point to point contact.
Talk Keys (C, I)
Each of the two channels has its own talk key. Pressing and holding the Talk key will activate a “press to
talk” function and the microphone will be muted when the Talk key is released. Pressing the talk key for
one second or less will latch the talk function on until the Talk key is pressed and released again.
Channel Volume Controls (D, H)
Each channel has its own volume control. The volume encoders are located on the side of the beltpack
just below where the keys. Rotating the encoder clockwise increases the volume, and rotating the
encoder counterclockwise decreases the volume. Volume encoders are also used to scroll through
parameters and values when the beltpack is operating in Menu Mode.
Menu Key (E)
The menu key toggles the BP-2 between normal operating mode and the Menu Mode. To enter the Menu
Mode, press and hold this key for 5 seconds. Similarly, to quickly exit the Menu mode and return to
normal operating mode, press and hold the Menu Key for 5 seconds.
Internal Microphone (F)
The BP-2 includes an internal condenser microphone and may be used without a headset if desired.
Internal Speaker (G)
The BP-2 includes an internal loudspeaker and may be used without a headset if desired. The internal
speaker allows the user to hear program audio, or audio from whomever is speaking to them.
Note!
The BP-2 automatically detects when a headset is connected and will change the
listening mode to headset instead of the internal speaker.
Talk Indicators (K)
Each channel includes a Talk indicator next to the Talk key which will light up when the Talk function
is enabled.
HARDWARE
