Teltonika TRB245 Bedienungsanleitung

https://wiki.teltonika-networks.com/view/TRB245_LEDs

TRB245 LEDs

Main Page > TRB Gateways > TRB245 > TRB245 Manual > TRB245 LEDs

This wiki page contains information about TRB245 gateway LEDs and their actions.

Contents

1 Power LED

2 Ethernet port LEDs

3 Connection status LED

4 Signal strength LEDs

Power LED

The power LED is located on the bottom left corner of the front panel, near the power connector:

It can perform two different actions:

Action Description

LED turned ON Gateway is powered up

LED turned OFF Gateway is not power up

Ethernet port LEDs

The Ethernet port LEDs are located on the gateway front panel, in both upper corners on Ethernet

port:

Since TRB245 gateway supports Fast ethernet speeds, green LED is not used and only orange LED

represents information about ethernet connection activity:

Action Description

LED turned ON Operating as a 10/100 Mbps connection

LED turned OFF No link established

LED blinking Connection established and there is activity (data being transferred)

LED blinking fast simultaneously with connection and signal strength LEDs Router is in the bootloader menu state*

* The bootloader menu is a special router state from which certain upgrades can be performed.

For more information on the bootloader menu, click here

Connection status LED

The connection status LEDs are located on left side of the back panel:

Action Description

2G, 3G and 4G LEDs are blinking at the same time No SIM or bad PIN

2G, 3G and 4G LEDs light up and down in sequence Searching mobile network operator

2G/3G/4G LED blinking Gateway connected to 2G/3G/4G, no data session established

2G/3G/4G LED turned ON Gateway connected to 2G/3G/4G with data session

2G/3G/4G LED blinking Gateway connected to 2G/3G/4G and data is being transferred

Signal strength LEDs

The signal strength LEDs are located on the right side of the back panel:

Each lit up LED represents a different value of the gateways current signal strength in RSSi:

No. of lit up LEDs Signal strength value

0≤ -111 dBm

1 -110 dBm to -82 dBm

2 -81 dBm to -52 dBm

3 ≥ -51 dBm

The signal strength LEDs can also be used as a time indicator for holding the reset button.

When you press and hold the reset button, if there is a User's default configuration configured on

the device, you have to hold it pressed for 6 seconds (by default) to initiate a User's default

configuration reset and 12 seconds (by default) to initiate a Factory reset. Otherwise, it is only

necessary to hold the reset button for 6 seconds to trigger a Factory reset. If the button was held

down longer than 20 seconds (by default) no action will be taken.

While holding the reset button each lit up signal strength LED indicate that a period of two seconds

has passed. In case with TRB245, when all 3 signal strength LEDs are lit up, they represent that 6

(LED number multiplied by 2) seconds have passed since you pressed down on the reset button.

After releasing the button at one of the reset periods, all 3 LEDs will start blinking every 1 second.

This signifies that the router has begun the reset.

Andere Teltonika Tor Handbücher

Teltonika

Teltonika TRB255 Bedienungsanleitung

Teltonika

Teltonika TRB142 Bedienungsanleitung

Teltonika

Teltonika RUT240 Bedienungsanleitung

Teltonika

Teltonika TRB140 Bedienungsanleitung

Teltonika

Teltonika TRB141 Bedienungsanleitung

Teltonika

Teltonika Voice Fax Gateway Bedienungsanleitung

Teltonika

Teltonika QSG TRB500 Bedienungsanleitung

Teltonika

Teltonika TRB145 Bedienungsanleitung

Teltonika

Teltonika TVF20 Series Bedienungsanleitung

Teltonika

Teltonika TRB140 Bedienungsanleitung

Teltonika

Teltonika TRB141 Bedienungsanleitung

Teltonika

Teltonika TRB145 Bedienungsanleitung

Teltonika

Teltonika TRB140 Bedienungsanleitung

Teltonika

Teltonika TRB255 Bedienungsanleitung

Teltonika

Teltonika TRB141 Bedienungsanleitung

Teltonika

Teltonika TRB245 Bedienungsanleitung

Teltonika

Teltonika RUT950 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung