Teltonika FMM640 Installationsanleitung

Quick Manual

v1.3

Professional LTE CAT M1/GNSS

terminal

FMM640

 
 2 
FMM640| Wiki 
Table of Contents 
Know your device .......................................................................... 3 
Pinout................................................................................................. 4 
Wiring scheme ............................................................................... 5 
Set up your device......................................................................... 6 
How to insert Micro-SIM card and connect the battery................ 6 
PC Connection (Windows)................................................................ 7 
How to install USB drivers (Windows)............................................. 7 
Configuration (Windows) ................................................................. 7 
Quick SMS configuration.................................................................. 9 
Mounting recommendations ..................................................... 10 
LED indications ............................................................................ 11 
Characteristics............................................................................. 11 
Basic characteristics ....................................................................... 11 
Electrical characteristics................................................................. 13 
Safety information...................................................................... 14 
Certification and Approvals ....................................................... 15 
Warranty ...................................................................................... 16 
Warranty Disclaimer........................................................................16 
 

FMM640| Wiki

Know your device

Figure 1 FMM640 device view

FMM640| Wiki

Pinout

Pinnumber

Pinname

Description

GND (-)

Ground

CAN 1L

SAE J1939 CAN interface Low channel 1

1WIRE POWER

Power supply pin for Dallas 1-Wire® devices

DIN4

Digital input, channel 4

DIN2

Digital input, channel 2

CAN 2L

SAE J1939 CAN interface Low channel 2

AIN2

Analog input, channel 2. Input range: 0-30V/0-

10V DC

DOUT3

Digital output. Open collector output

DOUT2

Digital output. Open collector output

AIN3

Analog input, channel 3. Input range: 0-30V/0-

10V DC

VCC (+)

Power supply (10-30 V DC)

CAN 1H

SAE J1939 CAN interface High channel 1

1WIRE DATA

Data channel for Dallas 1-Wire® devices

DIN3

Digital input, channel 3

IGN (DIN1)

Digital input, channel 1. DEDICATED FOR

IGNITION INPUT

CAN 2H

SAE J1939 CAN interface High channel 2

AIN1

Analog input, channel 1. Input range: 0-30V/0-

10V DC

DOUT4/AIN4

Digital output. Open collector output OR Analog

input, channel 4. Input range: 0-30V/0-10V DC

DOUT1

Digital output, channel 1. Open collector output

K-Line

K-LINE interface for online Tachograph Vehicle

Data transfer

Figure 2 FMM640 pinout

FMM640| Wiki

Figure 3 FMM640 Wiring scheme

Wiring scheme

Automotive relay

FMM640| Wiki

Set up your device

How to insert SIM card and

connect the battery

1. Unscrew 4 screws counterclockwise that are located on the

bottom of the device.

2. Remove the cover.

3. Insert SIM card as shown with PIN request disabled or read

Security info how to enter it later in Teltonika Configurator.

Make sure that SIM card cut-off corner is pointing forward to

slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.

4. Connect battery as shown to device.

5. After configuration, see “PC Connection (Windows)”, attach

device cover back.

6. Screw in all screws. Device is ready to be mounted.

Figure 8 Attaching cover back

Figure 9 Device is ready

Figure 6 SIM card insert

Figure 7 Battery connection

Figure 4 Unscrew screws

Figure 5 Cover removal

FMM640| Wiki

PC Connection (Windows)

1. Power-up FMM640 with DC voltage (10 –30 V) power supply

using power wires. LED’s should start blinking, see “LED

indications”.

2. Connect device to computer using Micro-USB cable or

Bluetooth connection:

•Using Micro-USB cable

▬You will need to install USB drivers, see “How to install

USB drivers (Windows)”

•Using Bluetooth

▬FMM640 Bluetooth is enabled by default. Turn on

Bluetooth on your PC, then select Add Bluetooth or

other device > Bluetooth. Choose your device named –

“FMM640_last_7_imei_digits”, without LE in the end.

Enter default password 5555, press Connect and then

select Done.

3. You are now ready to use the device on your computer.

How to install USB drivers

(Windows)

1. Please download COM port drivers from here.

2. Extract and run TeltonikaCOMDriver.exe.

3. Click Next in driver installation window.

4. In the following window click Install button.

Setup will continue installing the driver and eventually the

confirmation window will appear. Click Finish to complete the

setup.

Configuration (Windows)

At first FMM640 device will have default factory settings set. These

settings should be changed according to the user's needs. Main

configuration can be performed via Teltonika Configurator

software. Get the latest Configurator version from here.

Configurator operates on Microsoft Windows OS and uses

prerequisite MS .NET Framework. Make sure you have the correct

version installed.

Table 1 MS .NET requirements

MS.NETrequirements

Operating

system

MS .NET Framework

version

Version

Links

Windows Vista

Windows 7

Windows 8.1

Windows 10

MS .NET Framework

4.6.2

32 and 64 bit

www.microsoft.com

Downloaded Configurator will be in compressed archive. Extract it

and launch Configurator.exe. After launch software language can

be changed by clicking in the right bottom corner (Figure 10

Language selection).

FMM640| Wiki

Configuration process begins by pressing on connected device

(Figure 11 Device connected via USB).

After connection to Configurator Status window will be displayed

(Figure 12 Configurator Status window).

Various Status window tabs display information about GNSS,

GSM,I/O, Maintenance and etc. FMM640 has one user editable

profile, which can be loaded and saved to the device. After any

modification of configuration the changes need to be saved to

device using Save to device button. Main buttons offer following

functionality:

1. Load from device –loads configuration from device.

2. Save to device –saves configuration to device.

3. Load from file –loads configuration from file.

4. Save to file –saves configuration to file.

5. Update firmware –updates firmware on device.

6. Read records –reads records from the device.

7. Reboot device –restarts device.

8. Reset configuration –sets device configuration to

default.

Most important configurator section is GPRS –where all your

server and GPRS settings can be configured and Data Acquisition

–where data acquiring parameters can be configured.

More details about FMM640 configuration using Configurator can

be found in our Wiki.

Figure 11 Device connected via USB

Figure 10 Language selection

Figure 12 Configurator Status window

FMM640| Wiki

Quick SMS configuration

Default configuration has optimal parameters present to ensure

best performance of track quality and data usage.

Quickly set up your device by sending this SMS command to it:

Note: Before SMS text, two space symbols should be inserted.

GPRS settings:

•

2001

–APN

•

2002

–APN username (if there

are no APN username, empty

field should be left)

•

2003

–APN password (if there

are no APN password, empty

field should be left)

Server settings:

•

2004

–Domain

•

2005

–Port

•

2006

–Data sending protocol

(0 –TCP, 1 –UDP)

Default configuration settings

Movement and ignition detection:

Vehicle movement will

be detected by

accelerometer

Ignition will be detected

by vehicle power voltage

between 13,2 –30 V

Device makes a record On Moving if one of these events happen:

300 seconds passes

Vehicle turns 10 degrees

Vehicle drives 100

meters

Speed difference

between last coordinate

and current position is

greater than 10 km/h

Device makes a record On Stop if:

1 hour passes while

vehicle is stationary

and ignition is off

Records sending to server:

If device has made a

record it is sent to the

server every 120

seconds

After successful SMS configuration, FMM640 device will

synchronize time and update records to configured server.

Time intervals and default I/O elements can be changed by using

Teltonika Configurator or SMS parameters.

" setparam

2001

:APN;

2002

:APN_username;

2003

:APN_password;

2004

:Domain;

2005

:Port;

2006

:0;"

FMM640| Wiki

Mounting recommendations

•Connecting Wires

▬Wires should be connected while module is not plugged in.

▬Wires should be fastened to the other wires or non-moving

parts. Try to avoid heat emitting and moving objects near

the wires.

▬The connections should not be seen very clearly. If factory

isolation was removed while connecting wires, it should be

applied again.

▬If the wires are placed in the exterior or in places where they

can be damaged or exposed to heat, humidity, dirt, etc.,

additional isolation should be applied.

▬Wires cannot be connected to the board computers or

control units.

•Connecting power source

▬Be sure that after the car computer falls asleep, power is still

available on chosen wire. Depending on car, this may

happen in 5 to 30 minutes period.

▬When module is connected, be sure to measure voltage

again if it did not decrease.

▬It is recommended to connect to the main power cable in

the fuse box.

▬Use 3A, 125V external fuse.

•Connecting ignition wire

▬Be sure to check if it is a real ignition wire –power does not

disappear while starting the engine.

▬Check if this is not an ACC wire (when key is in the first

position, most electronics of the vehicle are available).

▬Check if power is still available when you turn off any of

vehicles devices.

▬Ignition is connected to the ignition relay output. As

alternative, any other relay, which has power output, when

ignition is on, may be chosen.

•Connecting ground wire

▬Ground wire is connected to the vehicle frame or metal

parts that are fixed to the frame.

▬If the wire is fixed with the bolt, the loop must be connected

to the end of the wire.

▬For better contact scrub paint from the place where loop is

connected.

PAY ATTENTION! Connecting the power supply must be

carried out in a very low impedance point of on-board

vehicle network. Connecting the GND at an arbitrary

point to the mass of the car is unacceptable, as static

and dynamic potentials on the line GND will be

unpredictable, which can lead to unstable FMM640

operation and even its failure.

Andere Handbücher für FMM640

Inhaltsverzeichnis

Andere Teltonika Touch-Terminal Handbücher

Teltonika

Teltonika FMM230 Bedienungsanleitung

Teltonika

Teltonika FMB641 Bedienungsanleitung

Teltonika

Teltonika FMB001 Bedienungsanleitung

Teltonika

Teltonika FMC225 Bedienungsanleitung

Teltonika

Teltonika FM6300 Bedienungsanleitung

Teltonika

Teltonika FMM125 Installationsanleitung

Teltonika

Teltonika FMM640 Bedienungsanleitung

Teltonika

Teltonika FMC125 Bedienungsanleitung

Teltonika

Teltonika FMC640 Installationsanleitung

Teltonika

Teltonika FM5300 Bedienungsanleitung

Teltonika

Teltonika FMC125 Installationsanleitung

Teltonika

Teltonika FMA110 Bedienungsanleitung

Teltonika

Teltonika FMB640 Installationsanleitung

Teltonika

Teltonika FMU126 Installationsanleitung

Teltonika

Teltonika FMC640 Bedienungsanleitung

Teltonika

Teltonika FMC13A Installationsanleitung

Teltonika

Teltonika FMB630 Bedienungsanleitung

Teltonika

Teltonika FMM125 Installationsanleitung

Teltonika

Teltonika FMC125 Installationsanleitung

Teltonika

Teltonika FM6320 Bedienungsanleitung

Teltonika

Teltonika FMM230 Installationsanleitung

Teltonika

Teltonika FMC225 Installationsanleitung

Teltonika

Teltonika FMC130 Installationsanleitung

Teltonika

Teltonika FMU125 Installationsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung