Tenda 5G03 Bedienungsanleitung
For product or function details, please go to www.tendacn.com to
download the user guide.
AX1800 Wi-Fi 6 5G NR Router
Quick Installation Guide
5G03
Package contents
5G NR Router × 1
Ethernet cable × 1 User manual × 1
Power adapter × 1
- 1 -
I. Set up the router
Tips
− To ensure performance and avoid damage to the SIM card, do
not insert or remove the SIM card when the router is running.
− To remove the SIM card, gently press the SIM card until it clicks.
The SIM card will automatically pop out.
❶Open the SIM card cover on the bottom panel of the router.
❷Insert a SIM card into the slot. Then close the cover.
- 2 -
SIM
SIM
RST
Mini SIM card (2FF) Nano SIM card (4FF)Micro SIM card (3FF)
Tips
If the LED indicator does not light up, refer to Q1 in FAQ.
❸Use the included power adapter to connect the power jack of
the router to a power source.
❹Press the button on the router to turn it on.
All LED indicators light up and then off immediately. Wait a
moment and then the , and indicators light up in
sequence when the router is connected to the internet
properly.
- 3 -
MESH
1
2
LAN1 WAN/LAN2 PWR
II. Access the internet
Tips
− Set your login password promptly to prevent unauthorized access.
− If you cannot log in to the web UI of the router, refer to Q3 in FAQ.
Connect your wired device, such as a computer, to the LAN1
or WAN/LAN2 port of the router using an Ethernet cable.
Connect your wireless device, such as a smartphone, to the
Wi-Fi network of the router using the Wi-Fi Name and Wi-Fi
Key labeled on the bottom panel of the router.
To further configure the router, log in to the web UI of the router
by visiting tendawifi.com on a connected device.
- 4 -
MESH
1
2
LAN1 WAN/LAN2 PWR
Or
III. (Optional) Extend your
network
Tips
− Currently, 5G03 can be used as the primary node to network with
devices that support the EASYMESH R2 protocol.
− Please ensure that the new device you want to add has never been
used. If not, reset it first.
Power on the router and connect it to the internet properly.
Place the new device in an elevated and open position within
3 meters from your router and power it on.
Press the MESH button of the router for about 1 to 3 seconds.
The LED indicator blinks fast. Within 2 minutes, press the
MESH/WPS button of the new device for 1 to 3 seconds to
negotiate with this router.
When the LED indicator of the router blinks slowly for 10
seconds and then lights solid on, the networking is successful
and the new device becomes a secondary node in the
network.
Refer to the following relocation tips to locate the new device
to a proper position:
• Ensure that the distance between any two nodes is within
their coverage range.
• Keep your nodes away from electronics with strong
interference, such as microwave ovens, induction cookers,
and refrigerators.
• Place the nodes in a high position with few obstacles.
- 5 -
1.
2.
3.
4.
5. Power on the new device again and check that its internet
connection status is correct according to its user guide.
- 6 -
Original node Add-on node
I. Configurar o roteador
Dicas
− Para garantir o desempenho e evitar danos ao cartão SIM, não
insira ou remova o cartão SIM quando o roteador estiver em
funcionamento.
− Para remover o cartão SIM, pressione suavemente o cartão
SIM até ouvir um clique. O cartão SIM sairá automaticamente.
❶Abra a tampa do cartão SIM no painel inferior do roteador.
❷Insira um cartão SIM no slot. Depois feche a tampa.
- 7 -
SIM
SIM
RST
Cartão Mini SIM (2FF) Cartão Nano SIM (4FF)Cartão Micro SIM (3FF)
Português
(Brasil)
Dicas
Se o indicador LED não acender, consulte o Q1 no FAQ.
❸Use o adaptador de alimentação incluído para conectar a
tomada de alimentação do roteador a uma fonte de
alimentação.
❹Pressione o botão no roteador para ligá-lo.
Todos os indicadores LED se acendem e depois se apagam
imediatamente. Espere um momento e então o , e os
indicadores acenderão em sequência quando o roteador
estiver conectado corretamente à Internet.
- 8 -
MESH
1
2
LAN1 WAN/LAN2 PWR
II. Acessar a internet
Dicas
− Defina sua senha de login imediatamente para evitar acesso não
autorizado.
− Se você não conseguir entrar na interface web do roteador,
consulte o Q3 em FAQ.
Conecte seu dispositivo com fio, como um computador, à porta
LAN1 ou WAN/LAN2 do roteador usando um cabo Ethernet.
Conecte seu dispositivo sem fio, tal como um smartphone, à
rede Wi-Fi do roteador usando o Wi-Fi Name e a Wi-Fi Key
etiquetada no painel inferior do roteador.
Para configurar ainda mais o roteador, faça o login na interface
web do roteador visitando o site tendawifi.com em um
dispositivo conectado.
- 9 -
MESH
1
2
LAN1 WAN/LAN2 PWR
ou
Inhaltsverzeichnis
Sprachen:
Andere Tenda WLAN-Router Handbücher
Tenda
Tenda W300D Bedienungsanleitung
Tenda
Tenda N60 Bedienungsanleitung
Tenda
Tenda F6 Bedienungsanleitung
Tenda
Tenda 3G622R Bedienungsanleitung
Tenda
Tenda AC1750 Bedienungsanleitung
Tenda
Tenda nova MW Series Bedienungsanleitung
Tenda
Tenda N3 11N Bedienungsanleitung
Tenda
Tenda AC8 Bedienungsanleitung
Tenda
Tenda 4G301 Bedienungsanleitung
Tenda
Tenda AC1200 Bedienungsanleitung
Tenda
Tenda W300D Bedienungsanleitung
Tenda
Tenda RX2 Pro Bedienungsanleitung
Tenda
Tenda AC6 Bedienungsanleitung
Tenda
Tenda 3G150B Bedienungsanleitung
Tenda
Tenda AC1200 Bedienungsanleitung
Tenda
Tenda F6 Bedienungsanleitung
Tenda
Tenda W168R Bedienungsanleitung
Tenda
Tenda AC11 Bedienungsanleitung
Tenda
Tenda W311R+ Bedienungsanleitung
Tenda
Tenda N60 Bedienungsanleitung
