TERK Technologies TUNVR1 Bedienungsanleitung

SETUP GUIDE

Check out setup videos at

www.TERK.com/Setup

HD DIGITAL TV TUNER

WITH

RECORDING

TUNVR1

WELCOME

Congratulations on your purchase of the Terk HD Digital TV Tuner with

Recording! This product combines an HDTV Tuner with Recording Capability

to let you get the most from your FREE local HD channels. This Setup Guide

takes you through the steps to get started.

What’s included:

• HD Television Tuner

• Power Adapter (for the tuner)

• Remote Control (to operate the tuner)

• HDMI Cable (to connect to your TV)

What’s NOT included:

• TV Antenna (to receive local TV stations)

• External USB Drive (to record programs or

timeshift what you’re watching)

Note: The tuner also offers a composite

video/audio connection for TVs that don’t

have an HDMI input. If you want to use a

composite video/audio connection, you’ll

need composite video/audio cables, which

are not included.

SETTING UP

1Connect the HD Digital TV

Tuner to an antenna.

Connect the coaxial cable from your TV

antenna to the ANTENNA IN jack on the back

of the HD Digital TV Tuner.

Note: For best results, we recommend Terk TV

antennas.

2Connect the HD Digital TV

Tuner to your TV, monitor, or

projector.

Connect the included HDMI cable to the HDMI

jack on the back of the tuner. Connect the

other end to an available HDMI input on you

HDTV, monitor, or projector.

Note: If your TV doesn’t have an HDMI input,

connect audio/video cables (not included) to

the VIDEO and AUDIO jacks on the tuner. Then

connect the other ends to VIDEO and AUDIO

jacks on your TV.

TV Antenna

HD Digital TV Tuner Back Panel

HDTV, Monitor, or Projector

HD Digital TV Tuner Back Panel

SETTING UP (continued)

Plug in the HD Digital TV Tuner.

Plug one end of the included AC adapter into

the 5V DC 2A jack on the back of the HD

Digital TV Tuner. Plug the other end into a

working AC outlet or surge protector.

Turn on your TV and make sure it’s on the correct input.

Press the power button for your TV, monitor, or projector (either on the remote that

came with it or on the device itself). Then press the button that changes input on this

device or its remote until you see the input you used for the tuner. For example, if you

connected the HDMI cable to the HDMI1 input on your TV, monitor, or projector, select

the HDMI1 input on your device.

HD Digital TV Tuner Back Panel

Install batteries in the tuner’s remote.

Open the battery compartment on the back of the remote. Then insert 2 AAA batteries

(not included) in the battery compartment, matching the batteries to the (+) and (–)

marks on the inside of the compartment.

SETTING UP (continued)

Turn on the HD Digital TV Tuner (if it’s not already on).

Press the POWER button on the front of the

tuner or on the tuner’s remote to turn it on. The

power indicator on the front of the tuner lights

up and the TERK screen appears on your TV,

monitor, or projector.

Go through the Installation Guide to perform a

Channel Search.

The ﬁrst time you turn it on, the tuner will take

you through an Installation Guide. Use the arrow

buttons on your remote to choose your preferred

language for the menus (OSD Language) and

your country.

Then highlight Channel Search and press OK to

start searching for channels in your area.

EXIT EXIT OK Confirm

Installation Guide

English

Country

Channel Search

USA

OSD Language

Continues on next page...

The tuner launches the auto search for channels. This

allows your tuner to program all of the broadcast

channels you receive into its channel memory. This

step could take up to 30 minutes. The Progress bar

shows how much of the search has been completed.

IMPORTANT: Make sure you have your antenna

connected to the tuner and pointed toward where

your broadcasts are coming from.

Once the tuner has completed the auto search, press

OK on the remote to see a list of the channels it found.

You can add individual channels later by using the

Manual Search or Auto Scan Add Channels (see page

23 for information—this does not delete current channel

list). You might need to do this if your broadcast

channels come from several different directions.

You can also mark some of the channels in the list as

your favorites using the Favorite Channels menu (see

page 21 for information).

SETTING UP (continued)

EXIT EXIT OK Confirm

All TV List

40-2 WHMB-D2

42-1 TBN

42-2 Hillsng

42-3 JUC/SOC

42-4 Enlace

42-5 SALSA

47-1 WBXI-CD

59-2 AntTV

59-1 WXIN-DT

EXIT EXIT MENU Skip

Channel Search

473.0MHz/6MHz

DTV: 003

001 WTHR-HD

002 COZI TV

003 Me-TV

Progress

Go through the Installation Guide to perform a

Channel Search (continued).

SETTING UP (continued)

(Optional) Connect a USB drive to the tuner for recording.

Connect a USB drive to the USB port on the

tuner’s front panel.

Note: Not all USB drives are compatible

with this tuner. For best results, use USB 3.0

portable Hard Drives and Flash drives.

Press the PVR button on the remote. Use the

arrow buttons to highlight the PVR Conﬁgure

option. Then press OK to access the Record

Device options.

Note: Timeshift Size sets the size of the

memory allocated to the Timeshift mode.

This is a temporary memory for programed

watched using Timeshift but not recorded.

Formatting the drive will delete all ﬁles on

your USB drive.

PVR Configure

Record Device

Format

EXIT Return OK Confirm

EXIT EXIT OK Confirm

Record Device

C: (USB1)

Timeshift Size 1.0 GB

Disk

Media Type

Disk Total Space

Disk Free Space

FAT32

931.25 GB

897.55 GB

(Optional) Conﬁgure the USB drive for your preferences.

TOUR OF THE HD DIGITAL TV TUNER

Remote Control

STANDBY / Turns the tuner on or puts it in standby mode.

MUTE / Mutes and unmutes the audio from the tuner.

AUDIO Selects from the available audio modes.

FAV Displays the Favorite Channel List (see page 21 for more information).

CC Turns on closed captioning (if available) and selects from available CC

types.

HDMI Selects the resolution of the tuner’s output.

GOTO Goes to a selected program time during playback of a recorded

program (see page 18 for more information).

RECALL Goes back to the previous channel.

MENU Displays the tuner’s Main Menu.

EPG Displays the tuner’s Electronic Program Guide and recording setup

schedule.

INFO Shows/hides program info. Press once to show program info. Press

twice to show detailed info with signal meter. While recording or watching

a recording, displays detailed record info.

EXIT Returns to the previous menu.

TOUR OF THE HD DIGITAL TV TUNER (continued)

Arrows, CH+/–, VOL+/– In the menu system or guides, moves cursor up/down or left/right.

Outside of the menus and guides, changes channel or adjusts volume.

OK Conﬁrms your selection. Press twice for the Channel List.

0-9 Inputs numbers, including channels to watch.

— Selects a digital sub channel (for example, 13.2).

PVR Used to format and setup a USB device for recording.

PLAY / PAUSE Starts/pauses playback of a recording. While watching a program or when

recording a program, pressing pause starts Timeshift mode (see page 19 for more info).

STOP Stops video playback or recording.

REV / FWD Scans in reverse or forward. Repeated presses select the scan speed (2X, 4X, 8X,

16X, 32X).

PREV / NEXT Goes to the next or previous ﬁle or recording.

HOLD In PVR mode, selects between in preview or full-screen video playback.

REPEAT Chooses a repeat playback mode (repeat program, repeat the folder, or play random

from folder).

PVR LIST Displays the list of PVR recordings on the USB device.

TIMER Enters Timer mode to schedule a program recording.

TOUR OF THE HD DIGITAL TV TUNER (continued)

HD Digital TV Tuner

Front Panel

ANTENNA IN jack Connects to a TV antenna

to receive local broadcasts.

HDMI jack Connects to your TV, monitor, or

projector using the HDMI cable (included).

AUDIO L/R and VIDEO jacks Connects

to your TV, monitor, or projector using a

composite video and stereo audio cables

(not included).

5V DC 2A jack Connects to the included DC

power adapter to power the tuner.

USB jack Connects to a USB drive for

recording or timeshifting programs.

Power indicator Shows when the tuner is on

(green) or in standby mode (red).

Recording indicator Flashes red when the

tuner is recording and the record clock is on-

screen.

CH+/– buttons Goes up and down through

the tuner’s channel list.

POWER button Turns the tuner on or puts it

in standby mode.

Power indicator Recording indicator

Back Panel

Inhaltsverzeichnis

Andere TERK Technologies TV-Tuner Handbücher

TERK Technologies

TERK Technologies TUNVR2 Bedienungsanleitung

Beliebte TV-Tuner Handbücher anderer Marken

KWorld

KWorld PE310SE Bedienungsanleitung

COMPRO

COMPRO M505 - STARTUP Bedienungsanleitung

Genius

Genius TVGo DVB-T31 Bedienungsanleitung

Zinwell

Zinwell ZAT-332 Bedienungsanleitung

RGBlink

RGBlink TAO 1mini-HN Bedienungsanleitung

TViX

TViX PVR R-2200 Bedienungsanleitung

Xavix

Xavix Xavixport Bedienungsanleitung

Peak

Peak NET-TV Bedienungsanleitung

Fracarro

Fracarro SAF-HD 10 Bedienungsanleitung

Eonon

Eonon E0770 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-NOVA-T-Stick Bedienungsanleitung

Digital Devices

Digital Devices Octopus Net Bedienungsanleitung

Gericom

Gericom USB 2.0 DVB-T Tuner Bedienungsanleitung

Manta

Manta DVBT013T2 Bedienungsanleitung

Kenwood

Kenwood KTC-D500E Bedienungsanleitung

AVIWEST

AVIWEST DMNG PRO 100 Bedienungsanleitung

Abode

Abode IP Streaming Camera Bedienungsanleitung

PS Audio

PS Audio AIRLENS Kurzanleitung