IMPORTANT NOTICE TO UK USERS
The appliance cord is terminated with a UK approved mains plug fitted
with a 13A fuse. If the fuse needs to be replaced, an ASTA or BSI
approved BS1362 fuse rated at 13A must be used. If you need to change
the mains plug, remove the fuse and dispose of this plug safely
immediatelyaftercuttingitfromthecord.
Connecting a Mains Plug
The wires in the mains lead are coloured in accordance with the code:
Blue:NEUTRAL Brown:LIVE Green&Yellow:EARTH.
Asthese colours may not correspond to thecoloured markings identifying
theterminalsinyourplug,proceedasfollows:
The wire coloured BLUE
must be connected to the
terminalmarked with the
letter N or coloured BLUE
or BLACK. The wire
coloured BROWN must
be connected to the
terminal marked with the letter L or coloured BROWN or RED. The wire
coloured GREEN & YELLOW must be connected to the terminal marked
with the letter E or coloured GREEN or GREEN & YELLOW or marked with
theEarthSymbol
13A
BS 1362
DESCRIPTION PRELIMINARIES
Unpack your kettle and any accessories carefully. Retain the packaging
so that you can transport the appliance safely. If you dispose of it please
dosowithregardtoanyrecyclingregulationsinyourarea.
Before using your kettle:
Check that the voltage marked on the rating plate under the kettle or the
basematchesyourmainsvoltage.
Please read all the instructions in this User Guide with particular
referencetothesafetynotes.
Before first use or after storage:
Fill the kettle with fresh water, boil it and then pour away the boiled
water.Repeatthistwoorthreetimes.Thekettleisnowreadyforuse.
CONNECTING AND USING THE KETTLE
IMPORTANT:THISAPPLIANCEMUSTBEEARTHED
Separatethekettlefromthebase.
Ensure that the mains socket is switched off at the wall. Lead the power
cord out through the recess in the base. Place the kettle base on a stable
level surface and connect the power cord to the wall socket. Excess cord
may be safely stowed by feeding it carefully into the stowage
compartmentinthebase.
Pressthelidreleasebackandthenopenthelid.
Pour away previously boiled water and use fresh water to fill the kettle.
Fill the kettle carefully. The water level must always cover the lowest
mark on the gauge. Do NOT fill the kettle above the MAX mark (1.7
litres) or boiling water may be ejected. If you cannot see the water level
throughthescale,thelevelisincorrect.
PresstheON/OFFswitchdown(Oposition).
Position the filled kettle correctly on the power base.
Switch on the power at the wall socket. Press the
ON/OFF switch up (Iposition). The switch will
illuminateshowingthekettleisoperational.
When the water has boiled, the kettle will switch off automatically. You
canstoptheboilingatanytimebypressingtheswitchdown.
To re-boil, depress the switch again. If the water is very hot, it may be
necessarytowaitafewsecondsbeforetheswitchcanbereset.
Always ensure the lid is closed and never lift it while the kettle is boiling
or you run the risk of scalding. If the lid is left open while boiling, the
automatic cut-out will not operate and you may boil the kettle dry.After
boiling,switchofftheapplianceatthemains.
The kettle may now be safely removed from its base and the boiled water
poured out. Always take care to pour boiling water slowly and carefully
withouttippingthekettletooquickly.
After use, replace the kettle on its base.
SAFETY AND OTHER FEATURES
Boil Switch with Auto Cut-Out
When the switch is depressed, the switch illuminates to shows that the
kettle is operational. After boiling, the kettle is automatically switched
offandtheilluminationextinguished.
Note: When boiling water, do NOT hold the switch up or steam will be
ejected from the lid and you may damage the automatic switch off
mechanism. Always ensure that the ON/OFF switch is clear of
obstructions,readilyoperableandisnotpreventedfromswitchingoff.
Boil Dry Protection
Your TESCO kettle is fitted with a safety device which switches it off if the
appliance is operated with insufficient water. If this occurs, the kettle
should be switched off at the mains and allowed to cool thoroughly
beforerefillingwithcoldwater.Thesafetydevicewillthenreset.
Overheating Shut -Off
In the event of gross overheating, your TESCO kettle will automatically
shut down to prevent further damage. Should this occur, take it to a
qualifiedservicepersonforexaminationandrepair.
Removable Scale Filter
The mesh filter in the kettle spout traps scale. If you fill the kettle via the
spout,theeffectiveness ofthisfilterwillbereduced.
To remove the filter, allow the kettle to
cool, open the lid, hold the filter as
shownandliftitout.
Brush the filter in running water to
removeanyadheredscale.
To replace, align the filter in the slot in
thespoutandpressintoplace.
Kettle Jug
Lid
Handle
Spout
Element*
Lid Release
Water Filter*
Kettle Base
*Inside Kettle Jug
Water Gauge
8
*Inside Kettle Jug
ON/OFF Switch
ON
OFF
