1
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a slightly damp cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
Do not install or operate near any heat sources such as radiators,
stoves, or other apparatus that produce heat.
Unplug this apparatus during lightning storms or when unused
for long periods of time.
Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as the power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally,
or has been dropped.
IMPORTANT
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communication. However, this is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit dierent•
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for•
help.
ELECTRICAL INFORMATION
Warning: Please refer to the electrical and safety information on
the exterior bottom enclosure before installing or operating the
apparatus.
Warning: The mains plug is used as disconnect device, the
disconnect device shall remain readily operable.
NOTICE
“Made for iPod/iPhone” means that an electronic accessory has
been designed to connect specically to iPod or iPhone and has
been certied by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this
device or its compliance with safety and regulatory standards.
iPhone shown not included.
Warning: To reduce the risk of re or electrical shock, do not
expose this product to rain or moisture. The product must not
be exposed to dripping and splashing and no object lled with
liquids such as a vase of owers should be placed on the product.
No naked ame sources such as candles should be placed on the
product.
Caution:
Changes or modications not expressly approved by the
manufacturer could void the user’s authority to operate this device.
Caution: Usage of controls or adjustments or performance
of procedures other than those specied herein may result in
hazardous exposure.
Caution: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Warning: The battery (battery or batteries or battery pack) shall
not be exposed to excessive heat such as sunshine, re or the
like.
Warning: Only use attachments and accessories specied or
provided by the manufacturer such as the power cord, mains
supply adapter, batteries etc.
Do not install this equipment in a conned or enclosed space such
as a book case or similar unit, and ensure that the location is well-
ventilated. The ventilation must not be impeded by covering the
ventilation openings with items such as newspaper, table-cloths,
curtains etc.
WARNING: DANGER OF RADIATION
This symbol indicates that there are important
operating and maintenance instructions in
the literature accompanying this unit.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within this unit.
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
IMPORTANT SAFETY INFORMATION
These labels tell you that the unit contains a laser component.
Opening the CD compartment lid and defeating the safety
interlocks will expose the user to radiation from the laser beam.
Do not stare into the laser while it is operating.
