Tesla HI6401SB Bedienungsanleitung
Product images are for illustrative purposes only and may differ from the actual product.
BiH/
CG HR SRBSLOENG
INDUCTION
HOB
HI6401SB
User Manual
2
ENG
Dear Customer,
Thank you very much for your preference for products.
We recommend you to read the instruction manual carefully and keep it handy before you use this induction hob
so that it maintains its quality just like the first day you bought it and serves you most efficiently.
NOTE
This instruction manual has been prepared for a variety of models. Some of the features specified in the
manual may not exist in your device. These features are marked with an asterisk (*).
Our devices are designed for domestic use. They are not for commercial use.
PLEASE READ THE INSTRUCTIONS BEFORE YOU INSTALL OR USE THİS DEVICE.
This product has been manufactured in an environmentally-friendly and modern plant without harming the nature.
Conforms with the WEEE Regulations.
IMPORTANT WARNINGS
1. Installation and repair should always be performed
by “AUTHORIZED SERVICE”. Manufacturer shall not
be held responsible for operations performed by
unauthorized persons.
2. Please read this operating instructions carefully.
Only by this way you can use the appliance safely
and in a correct manner.
3. The cooker should be used according to operating
instructions.
4. Keep children below the age of 8 and pets away
when operating.
5. WARNING: Fire hazard; do not store the
materials on the cooking surface.
6. WARNING: The appliance and its accessible
parts are hot during operation.
7. Setting conditions of this device are specified on
the label. (Or on the data plate)
8. The accessible parts may be hot when the grill is
used. Small children should be kept away.
9. WARNING: This appliance is intended for
cooking. It should not be used for other
purposes like heating a room.
10. To clean the appliance, do not use steam cleaners.
11. NEVER try to put out the fire with water. Only shut
down the device circuit and then cover the flame
with a cover or a fire blanket.
12. Children under 8 years of age should be kept
away, if they cannot be monitored continuously.
13. Touching the heating elements should be avoided.
14. CAUTION: Cooking process shall be supervised.
Cooking process shall always be supervised.
15. The appliance is not suitable for use with an
external timer or a separate remote control system.
16. This device can be used by children over 8 years
of age, people with physical, hearing or mental
challenges or people with lack of experience
or knowledge; as long as control is ensured or
information is provided regarding the dangers.
17. This device has been designed for household use
only.
18. Children must not play with the appliance.
Cleaning or user maintenance of the appliance
shall not be performed by children unless they are
older than 8 years and supervised by adults.
19. Keep the appliance and its power cord away from
children less than 8 years old.
20. Put curtains, tulles, paper or any flammable
(ignitable) material away from the appliance before
starting to use the appliance. Do not put ignitable
or flammable materials on or in the appliance.
21. Keep the ventilation channels open.
22. Do not heat closed cans and glass jars. The
pressure may lead jars to explode.
23. Do not use the product in states like medicated
and/or under influence of alcohol which may affect
your ability of judgement.
24. After each use, check if the unit is turned off.
25. Be careful when using alcohol in your foods.
Alcohol will evaporate at high temperatures and
may catch fire to cause a fire if it comes in contact
with hot surfaces.
26. If the appliance is faulty or has a visible damage,
do not operate the appliance.
27. Do not touch the plug with wet hands. Do not pull
the cord to plug off, always hold the plug.
28. Do not put objects that children may reach on the
appliance.
3
ENG
29. The packaging materials are dangerous for
children. Keep packaging materials away from the
reach of children.
30. Cooker supply can be disconnected during any
construction work at home. After completing the
work, re-connecting the cooker shall be done by
authorized service.
31. Do not place metal utensils such as knife, fork,
spoon on the surface of the appliance, since they
will get hot.
32. To prevent overheating, the appliance should not
be installed behind of a decorative cover.
33. Turn off the appliance before removing the
safeguards. After cleaning, install the safeguards
according to instructions.
34. Cable fixing point shall be protected.
35. CAUTION: If the glass of the stove is broken,
turn off any heating element immediately and
disconnect the appliance from power source,
do not touch the surface of the appliance and
do not use the appliance.
36. User should not handle the cooker by himself.
37. When not turning of the cooker during cooking,
user can touch hot surfaces causing burns.
38. If heavier loads are places on the cooker, these
loads can trip over. It may cause personal injuries.
39. WARNING: As the induction surfaces generate
a magnetic field, it may cause harmful effects
for people using medical devices such as
pacemakers or insulin pumps.
40. WARNING: When induction furnaces are
operated at high power or based on the
material of the pan base, it may emit certain
noises. This is normal.
Electrical Safety
1. Plug the appliance in a grounded socket
protected by a fuse conforming to the values
specified in the technical specifications chart.
2. Have an authorized electrician set grounding
equipment. Our company shall not be responsible
for the damages that shall be incurred due to
using the product without grounding according to
local regulations.
3. WARNING: If the surface is cracked, turn off the
appliance to avoid risk of electric shock.
4. Never wash the appliance by spraying or pouring
water on it. There is a risk of electrocution.
5. Do not touch the plug with wet hands. Do not pull
the cord to plug off, always hold the plug.
6. Unplug the unit during installation, maintenance,
cleaning and repair.
7. Make sure the plug is inserted firmly into wall
socket to avoid sparks.
8. If the power supply cord (the cord with plug)
is damaged, this cord shall be replaced by the
manufacturer or its service agent or an equally
qualified personnel to prevent a hazardous
situation.
9. Do not use cut or damaged cords or extension
cords other than the original cord.
10. Do not use steam cleaners for cleaning the
appliance, otherwise electric shock may occur.
11. Make sure there is no liquid or humidity in the
outlet where the product plug is installed.
12. An omnipolar switch capable to disconnect power
supply is required for installation. Disconnection
from power supply shall be provided with a switch
or an integrated fuse installed on fixed power
supply according to building code.
13. The power supply cord (the cord with plug) shall
not contact the hot parts of the appliance.
14. Unplug the unit during installation, maintenance,
cleaning and repair.
15. Appliance is equipped with a type ‘’Y’’ cord cable.
16. The circuit breaker switches of the cooker shall be
placed so that end user can reach them when the
cooker is installed.
17. Fixed connections shall be connected to a power
supply enabling omnipolar disconnection. For
appliances with over voltage category below III,
disconnection device shall be connected to fixed
power supply according to wiring code.
18. Do not remove ignition switches from the
appliance. Otherwise, live electric cables can be
accessed. It may cause an electric shock.
4
ENG
Methods for Protecting Ceramic Glass Cooking Surface From
Damage
Intended Use
Ceramic glass surface is not sensitive to heat (up to
650°C) and temperature fluctuations. It is unbreakable
and scratch-resistant to a certain degree. However, to
avoid any damage, please do the following:
1. Never pour cold water on hot stoves.
2. Do not stand on a ceramic glass plate.
3. Sudden pressure, for example, the effect of a
falling salt shaker may be critical. So, do not place
such objects on a place above the hobs.
4. After each use, make sure that the base of the
cooking pot and surfaces of cooking zones are
clean and dry.
5. Do not peel vegetables on the hob surfaces. Sand
grains falling from the vegetables may scratch the
ceramic glass plate.
6. Do not lay flammable materials such as cardboard
or plastic on the oven. Objects such as tin, zinc,
or aluminium (as well as aluminium foils or empty
coffee pots) may melt on hot cooking surfaces and
thus cause damage.
7. Take care not to let sugary foods or fruit juices
contact the hot cooking zones.The ceramic glass
surface may be stained by these.
1. This product is designed for home use.
Commercial use of the appliance is not permitted.
2. This appliance may only be used for cooking
purposes. It shall not be used for other purposes
like heating a room.
3. The manufacturer assumes no responsibility for
any damage due to misuse or mishandling.
4. Operational life of the product you have
purchased is 10 years. This is the period for
which the spare parts required for the operation
of this product as defined is provided by the
manufacturer.
Electrical Connection
1. Setting conditions of this appliance is indicated in
tag or data plate.
2. Your appliance should be plugged in a fuse
appropriate for electric power. If necessary, it
is recommended that installation is done by
authorized service.
3. Your appliance is configured in accordance with
electrical supply of 220-240V AC/380-415V3N AC
50/60Hz.
4. If main electrical network is different from these
values, contact with your authorized service.
5. Electrical connections of your appliance should
only be made to the fuses having suitably wired
grounding (grounded) system. If no convenient
fuse is available in the place where your appliance
is to be installed, contact with authorized service
immediately. Manufacturing firm is not responsible
definitely for the damages that fuses whose
grounding is not made and connected to the
appliance can cause.
6. Plug of the appliance should be close to be
accessed easily to the fuse whose grounding is
made without use of extension cord.
7. Do not allow contacting the power cable of your
appliance with hot regions. Similarly, keep away it
from sharp edges and corners.
8. If feeder cord is damaged, this cord should be
replaced either by manufacturer or its service
agency or same degree qualified personnel in
order to hinder a dangerous situation.
9. Wrong electrical connection may give damage
to the appliance.In this case, your appliance
will remain out of guarantee scope. Electrical
connection of your appliance should be done by
authorized service.
5
ENG
Electrical Connection Scheme
Connect the cables as specified below.
WARNING!
220-240V 50/60 Hz. power supply is suitable for single phase connection, and 380-415V 50/60 Hz. power supply
is suitable for double phase connection.
Input
L
L1 L1 L1L2 L2 L2
L1 L2
N
N1 N1 N1N2 N2 N2
N
Input Input
Power
Line
Power
Line
Power
Line
Junction box
Single Phase Connection Double Phase Connection
Junction box Junction box
Black
Black
Black
Brown
Brown
Brown
Green
Green
Green
Blue
Blue
Blue
Yellow-Green
Yellow-Green
Yellow-Green
6
ENG
INTRODUCTION OF THE APPLIANCE
INSTALLATION OF COOKTOP
1. Upper left cooking area
2. Lower left cooking area
3. Upper right cooking area
4. Lower right cooking area
5. Glass surface
6. Control panel
160 mm heater zone 1400 W
160 mm heater zone (P) 1850 W
200 mm heater zone 1850 W
200 mm heater zone (P) 2100 W
Total power consumption 7200 W
Voltage 220-240 / 380-415 V
Net weight 8,2 kg
Gross weight 9,4 kg
WARNING!
WARNING!
• For the modification to be done by authorized service, this table should be considered. Manufacturer may not
be held responsible for any problems rising because of any faulty modification.
• In order to increase the product quality, the technical specifications may be changed without prior notice.
• The values provided with the appliance or its accompanying documents are laboratory readings in accordance
with the respective standards. These values may differ depending on the use and ambient conditions.
• It is customer’s responsibility to prepare the location the product shall be placed on and
also to have the electrical installation prepared.
• The rules in local standards about electrical installations shall be followed during
product installation.
• Check for any damage on the appliance before installing it. Do not have the product
installed if it is damaged. Damaged products cause a risk for your safety.
Check if the electrical installation is proper to bring the appliance in operating condition. If electricity installation
is not suitable, call an electrician and plumber to arrange the utilities as necessary. Manufacturer shall not be held
responsible for damages caused by operations performed by unauthorized persons.
Technical Features
7
ENG
Application Of A Strip Under The Appliance
Installation
Correct Place For Installation
Product is designed in accordance with the
kitchen counters supplied from market. A safe
distance should be left between the product and
kitchen walls and furniture.
If hood/aspirator will be installed over your
appliance, obey to the recommendation of hood
/ aspirator
manufacturer for assembly height. (min. 65 cm)
The gap that cooktop is to be placed on the
counter should be cut in line with cooktop
installation dimensions.
For installation of the product, the rules specified
in local standards related to electricity should be
complied.
A strip shall be affixed to the bottom of the
appliance to prevent substances that may
overflow, such as water and oil, from entering
the appliance in case of any overflow while
cooking and heating. Place the appliance on the
drain on the countertop by gently pressing it.
If there is a built-in oven under the appliance,
kitchen furniture shall be arranged to allow
ventilation.
When product is mounted on a drawer, if it is possible to touch lower side of product, this section should be
separated with a wooden shelf.
Strip
8
ENG
Installation Diagram
AMin. 450 mm
B40 mm
While mounting cooktop on a closet, as shown in the figure above, in order to separate between closet and
cooktop, a shelf should be mounted. If it is mounted on a built-in oven, there is no need to do that.
If your cooktop will be mounted next to right or left wall, the minimum distance between wall and cooktop should
be 50 mm.
At the back of the furniture as shown below leave a venting gap of 180 cm² (450 x 40 mm) is required.
1. Turn the cooktop down and place on smooth ground.
2. In order to prevent entrance of foreign substances and liquids between cooktop and counter, apply the paste
given in package to the sides of lower guard of counter. For corners, curl paste and increase curls till filling
corner gaps.
3. Turn cooktop again and align with and place on counter.
4. Fasten up your cooktop on counter by using the clamp and screws supplied.
9
ENG
Counter Cut-Off Sizes
USING YOUR APPLIANCE
1. To turn the device on and off, press and hold the on/off button until you hear a “beep”. When the unit is turned
on, the heat zone indicators shall be displayed.
2. The controls react to touching, so you do not need to apply any pressure to the controls.
3. Place a suitable pot, pan, etc. on the cooking area that you want to use.
4. Make sure that the base of the pot, pan, etc. you have placed and the surface of the cooking area are clean
and dry.
5. When you touch the heating zone selection control, the indicator next to the key you are touching shall flash.
6. You can set the temperature by touching the sliding control of the heating zone you desire. (Applies to
products with slider control, see fig. 1)
Note the following values while installing your stove or cutting the counter.
The gap on which the hob is placed must be cut in accordance with the dimensions of hob installation.
A520 mm
B590 mm
C58 mm
D560 mm
EMin. 175 mm
F
Min. 50 mmG
H
I490 mm
Figure 1 Temperature
down Temperature
up
10
ENG
7. Use the bottom, not the tip of your finger while using the device. You shall hear a “beep” at every touch.
8. Make sure that the touch controls are always clean and dry. Even a thin layer of water may make it difficult for
touch controls to work.
Correct Wrong
INDUCTION STOVE ELECTRONIC CARD MANUAL
Turning the appliance on
The unit is switched on by pressing the button. symbol is displayed on all indicators. If the glass temperature
above the hob is above 45 °C, the and symbols are displayed on the screen of corresponding hob one after
the other.
(=0.5 seconds, = 0.5 seconds)
Turning the appliance off
The unit is switched off by pressing the button. Even if the child lock is active on the timer indicator, it is possible
to switch off the appliance by pressing the button.
WARNING!
The electronics remain active for 1 minute. If there is no cooking level or selected timer in this time interval, the
appliance shall automatically switch to "Off Mode" with a beep.
1. On/Off function
2. Timer down
3. Cooking area temperature level
4. Timer up
5. Automatic quick cooking function
6. Child lock function
7. Lower left cooking area
8. Upper left cooking area
9. Upper right cooking area
10. Lower right cooking area
11. Timer function
The unit is ready to operate 1 second after it is connected to the mains power supply. All the
LEDs and indicators are illuminated for 1 second.
NOTE
Inhaltsverzeichnis
Andere Tesla Kochfeld Handbücher
Tesla
Tesla HI6400MB Bedienungsanleitung
Tesla
Tesla HV6401TB Bedienungsanleitung
Tesla
Tesla HI6400TB Bedienungsanleitung
Tesla
Tesla HV6400MB Bedienungsanleitung
Tesla
Tesla HV3200TB Bedienungsanleitung
Tesla
Tesla HI3200TB Bedienungsanleitung
Tesla
Tesla HV6400TB Bedienungsanleitung
Tesla
Tesla HI3200SB Bedienungsanleitung
Tesla
Tesla HI6300TB Bedienungsanleitung
Tesla
Tesla HI6200TB Bedienungsanleitung
