Testifire XTR2 Bedienungsanleitung

Testire XTR2

USER

MANUAL

detectortesters.com

EU: shift-consult Hubert Scherzinger

Hessenweier 9,79108 Freiburg, DE

Tel: +49 (0) 7665 91 21 74

No Climb Products Ltd.

163 Dixons Hill Road, Welham

Green. Hertfordshire, AL9 7JE,

United Kingdom

Tel +44 (0)1707 282 760

2Testire XTR2

This product is intended to be used at height.

Exercise great care and always wear appropriate PPE

(personal protective equipment) when operating above

head height in order to avoid the risk of injury.

DO NOT OVER REACH. Keep proper footing and

balance at all times. Proper footing and balance

enables better control of the equipment in

unexpected situations.

Pay particular attention to avoid contact with overhead

items such as light ttings, overhead power cables and

any other objects that could be accidentally dislodged

which might cause danger to the operator or anyone

else in the vicinity.

Avoid prolonged, direct exposure to the vapour

generated by Testire XTR2. Safety Data Sheets for

the Testire XTR2 battery pack and Testire XTR2

Smoke Cartridge are available. It is recommended to

review the safety data sheets for Testire XTR2

Battery Pack and Testire XTR2 Smoke Cartridge

before use (see detectortesters.com).

This product contains hot parts.

DO NOT TOUCH the heat element. It may be very hot

immediately after use and may burn if touched.

Contains precision parts which may be easily damaged

and cause injury. DO NOT TOUCH the smoke uid

intake pipe in the smoke cartridge area or the heat

element in the tester cup.

Contains Lithium Ion rechargeable batteries:

• Do not dismantle, open, shred or incinerate

batteries.

• Do not expose batteries to heat or re. Avoid

storage in direct sunlight.

• Do not short-circuit a battery. Do not store bat-

teries loose in a box or drawer where they may

short-circuit each other or be short-circuited by

other metal objects.

• Do not subject batteries to mechanical shock.

• Keep batteries clean and dry.

• Do not use any charger other than that speci-

cally provided for use with the equipment. Refer

to the manufacturer’s instructions or equipment

manual for proper charging instructions.

• Do not leave a battery on prolonged charge when

not in use.

• Do not use any battery which is not designed for

use with this equipment.

• Do not use the battery in any other application.

• Keep batteries out of the reach of children.

• Dispose of properly.

CAUTIONS & WARNINGS

Warning Caution

Testire XTR2

• Read this User Manual completely before using your

Testire XTR2

• Keep this User Manual - save all safety and operational

instructions for future reference.

• Take note of the Warnings - Read carefully and follow all

warning labels on the product and those described in this

User Manual.

• Testire XTR2 is electronic test equipment and care

should be taken when handling and storing. Dropping the

unit on to a hard surface could damage it. Please look after

it, treat it with care for lasting use.

• This product is designed for indoor use only and should

not be subject to harsh environments. It is not designed

for use in hazardous areas (those containing explosive

vapour or dust). Do not use the equipment in places where

temperatures and/or humidity are high or go through

rapid changes including:

◦Direct sunlight

◦Near heat sources (stoves, radiators, etc.)

◦Sandy or dusty environments

◦In the presence of strong magnetic elds

◦Places prone to strong vibration

◦Restrictions detailed in the Technical Information (see

Section 12).

• Testire XTR2 may be used in ceiling and oor voids but

care must be taken to ensure that the unit and cup can

pass through gaps in both directions.

• Stop using Testire XTR2 immediately if you notice any

damage or unusual odours, liquids or sounds coming from

the unit. Turn the power off immediately and consult tech-

nical support and troubleshooting (see section 11).

• Use only approved accessories as described in this manual

that are recommended by the manufacturer for your Testi-

re XTR2 (see section 7).

• Testire XTR2 x1

• Testire smoke generator x1

• TES3 smoke cartridge x1

• Testire battery pack x1

• Battery charge cradle x1

• Mains power supply x1

• Car power adaptor x1

• Charger lead (USB-C to USB-C) x1

• Quick start guide

IMPORTANT

INFORMATION

KIT CONTENTS

WHAT’S IN THE BOX?

4Testire XTR2

Cautions and warnings 2

Important information 2

Kit Contents – What’s in the box? 3

1. General Instructions 6

1.1 Warranty 6

1.1 Acknowledgement 6

1.2 Recycling 6

1.3 Declarations & Certications 6

1.4 Privacy Policy 6

2.  TestireXTR2Introduction       7

3.  Preparationforrstuse        8

3.1 Getting started with DT Connect 8

3.2 Charging the Battery 9

3.3 Installing the Generator 9

3.4 Inserting the smoke cartridge 10

3.5 Inserting the Battery 10

4.  UsingTestireXTR2        11

4.1 Attaching Testire XTR2 to Solo Access Poles 11

4.2 Powering on Testire XTR2 11

4.3 LED Indicator Reference Chart 12

4.4 Adjusting the Head Unit Angle 12

5. Performing a Test 13

5.1 Default Smoke Test 13

5.2 Heat Test 14

5.3 Combined Test 15

5.4 Sequential Test 16

5.5 Clearing a Detector 17

5.6 Delayed Start 17

5.7 Using the LED Torch 17

5.8 Manual Purge 18

5.9 Device Settings 18

6. ASD Adaptor – Testing ASD Systems and Flat Detectors 19

6.1 Testing an ASD System or Flat Detector 19

6.2 Installing the ASD Adaptor 19

6.3 Testing with the ASD Adaptor 19

7.  RemovingandReplacingConsumables      20

7.1 Removing the Smoke Cartridge 20

7.2 Replacing the Smoke Cartridge 20

7.3 Removing the Smoke Generator 20

7.4 Replacing the Smoke Generator 21

7.5 Removing the Battery for Charging 21

7.6 Replacing the Battery 21

7.7 Removing and Replacing the Membrane 21

8.  DetectortestersCloudPortal       22

8.1 Registering a New Account 22

8.2 Verifying Your New Account 22

8.3 Registering and Purchasing a Subscription for Testire XTR2 23

8.3.1 Registering Testire XTR2 23

8.3.2 Purchasing a Subscription for Testire XTR2 23

8.3.3 Cancelling a Subscription 24

8.4 Managing Test Reports 24

8.5 Managing Technicians 24

8.6 Settings Menu 25

8.6.1 Uploading a Company Logo 25

8.6.2 Company Details 25

8.6.3 Prole Details 26

8.6.4 Changing Password 26

9.  DTConnectApp         27

9.1 Downloading the App 27

9.2 Signing In 27

9.3 Pairing your Testire XTR2 29

9.4 Creating a New Test Job 30

9.5 Performing a Test 31

CONTENTS

Testire XTR2

9.5.1 Aborted Tests 32

9.5.2 Changing Test Mode 33

9.5.3 Changing Alarm Signal Mode 34

9.5.4 Manual Clearing 34

9.5.5 Using the Delayed Start mode 35

9.6 Closing a Test Job 37

9.7 Sharing a Test Report 39

9.8 App Settings Menu 41

9.8.1 Edit Prole 41

9.8.2 My Companies 41

9.8.3 Change Email Address 41

9.8.4 Change Password 41

9.8.5 Error History 41

9.8.6 Push Notications 41

9.8.7 Vibration/Sound 41

9.8.8 Help 41

9.8.9 Give Feedback 42

9.8.10 Terms & Conditions 42

9.8.11 Privacy Policy 42

9.8.12 Deactivate Account 42

10.  ConsumablesandAccessories       43

11.  Troubleshooting         44

11.1 Device Error Codes 45

12.  Support&Technical        46

12.1 Maintenance 46

12.2 Technical Information 47

12.3 Support Contact 48

6Testire XTR2

In addition to any other express warranty given in writing by

the Company in relation to the Goods, the Company warrants

that the Goods supplied under these terms and conditions will

be in accordance with the specication (if any) contained in the

Purchase Order, and will be free from defects in workmanship

and material for a period of 24 months (device and charger)

from the date of delivery to the Buyer, or for a period of 24

months after the date of sale by the Buyer to the nal custom-

er, or for a period of 24 months from the date of rst registra-

tion with DT Connect, whichever period is the shorter.

Testire™ is a registered trademark of No Climb Products Ltd.

All other brand names mentioned are trademarks or

registered marks of their respective holders, and are

hereby acknowledged.

Testire XTR2 and DT Connect are covered by the Detectortest-

ers (No Climb Products) privacy policy. Full details of the policy

can be found on the Detectortesters website.

https://www.detectortesters.com/privacy-policy/

This product and its associated components are fully compliant

with the following:

• CE (including EMC, LVD and RoHS)

• UKCA

• UL – UL268C, UL2054, UL1642 and ULC equivalents

• 2014/53/EU – Radio Equipment Directive (RED); Articles

3.1, 3.2 and 3.3

• 2011/65/EU – Reduction of Hazardous Substances (RoHS)

• UN38.3 - UN Standard for Lithium battery shipping

Further details regarding declarations and certications are

available upon request. Please contact

[email protected] for more information.

The packaging can be easily separated into the following

materials:

• Cardboard (outer box)

• Cardboard (inner buffers, boxes)

• Polyethylene

• Plastic

Please dispose in line with local environmental requirements.

WEEE (Waste Electrical & Electronic Equipment) Regulations

Testire XTR2, accessories and batteries are suitably marked

to be recycled in accordance with your local environmental

requirements. Alternatively, these items may be returned to the

manufacturer via your reseller for disposal in compliance with

WEEE (Waste Electrical & Electronic Equipment) Regulations.

GENERAL INSTRUCTIONS

1.1 Warranty

1.1 Acknowledgement

1.4PrivacyPolicy

1.3Declarations&Certications

1.2 Recycling

If the Testire XTR2 is used in a manner not specied

by the manufacturer, the protection provided by the

unit may be impaired.

Thank you for selecting Detectortesters for your

equipment needs.

Your Testire XTR2 has been designed with

functionality, reliability, and safety in mind. It is your

responsibility to use this instrument in conformance

with local electrical codes. It is very important that

the user follows installation instructions exactly

as written. Do not attempt operation without this

information.

WARNING

Testire XTR2

TESTIFIRE XTR2

INTRODUCTION

ThankyouforpurchasingtheTestireXTR2

multifunction Smoke-Heat Detector Tester.

This manual is designed to assist you to get the best

and most efcient use of the Testire XTR2 and

provides all the information required to perform

routine service and maintenance tasks with ease.

Testire XTR2 includes advanced technology that

simplies functional testing of smoke, heat and

multi-function detectors in the eld.

Full functionality of Testire XTR2 requires the use of

the DT Connect app and Cloud Portal. Prior to rst use,

Testire XTR2 must be registered and paired to the

app in order to function.

Design Features

1. Tester cup

2. Cup membrane

3. Standoff plate

4. Smoke outlet

5. Heater element

6. Proximity sensor

7. Optical LED reader

8. LED torch

9. Air inlet

10. Power button

11. LCD touch display

12. Status LED’s

13. Locking button

14. Battery pack

15. Smoke cartridge

16. Smoke generator

16 3

8Testire XTR2

PREPARATION FOR

FIRST USE

3.1GettingstartedwithDTConnect:

GettheDTConnectapp

For help with DT Connect,

including the app, Cloud Portal

and subscriptions, scan the QR

code:

STEP 3

Download the DT Connect app for your smartphone device

from the App Store or Google Play Store. The following

smartphones are supported:

• Apple iPhone with iOS 12 or later

• Android OS 8 or later

STEP 1

Visit https://detectortesters-connect.com to create

your account.

STEP 2

Sign into the Cloud Portal to register your device. You will

need to purchase a subscription to use connected services

however your XTR2 comes with an extended free trial

which starts from the moment you register your device.

You will be informed via the portal and DT Connect app

when your free trial subscription is about to expire.

Testire XTR2

The battery is charged by tting the battery pack into the

charge cradle and connecting to a mains socket using the

supplied power adaptor (Fig. 1)

• Ensure the battery is fully charged before use.

• Do not charge the battery outside of the specied

operating temperature range (5-45°C).

• At low ambient temperatures (5-10°C), the battery

may not charge completely but may continue to indi-

cate that charging is in progress.

• If the battery pack detects that the temperature is

outside of the operational temperature range for

charging, a fault will be indicated by a red ashing LED.

• In the event of a battery charging fault, remove the

battery from the charging cradle, ensure the battery

is within the operational temperature range and retry

charging the battery.

• Open the back cover

• Remove protective packaging of generator. Do not

touch exposed electrical contacts.

• Insert generator rmly into recess, engaging clips 1 and

2 (see Fig.2)

• Once the generator is inserted, do not remove it until

indicated that a replacement is necessary.

• When replacing a generator, any dust or debris within

the Testire XTR2 housing can be removed using an air

duster. Any condensation can be removed by wiping

with a lint-free cloth.

• Empty generators may be returned to the manufacturer

via the reseller for environmentally friendly disposal

to comply with WEEE (Waste Electrical & Electronic

Equipment) Regulations.

Priortorstuse:

3.2ChargingtheBattery

3.3InstallingtheGenerator

Figure 1

Figure 2

Read cautions on lithium Ion rechargeable

batteries before use (see page 2)

WARNING

10 Testire XTR2

• Remove the cartridge from bag.

• Do not insert the cartridge until the generator has been

fully tted to the main unit. See installing the Generator

section 3.2.

• Slide cartridge completely into the generator housing

following the guide rails (see Fig. 3)

• Once the cartridge is inserted do not remove it until

indicated that a replacement is necessary. Do not re-use

old cartridges.

• Empty cartridges may be returned to the manufacturer

via the reseller for environmentally friendly disposal

to comply with WEEE (Waste Electrical & Electronic

Equipment) Regulations.

• Once the battery is charged clip the battery pack into

the battery compartment (Fig. 4).

• Do not force the battery into place

• Do not install the battery before the Smoke Generator

and Smoke Cartridge

• Close the back cover before powering on

3.4Insertingthesmokecartridge 3.5InsertingtheBattery

Do not touch the contacts on the PCB on the

cartridge. Static electricity may cause damage and

contamination of the contacts must be avoided.

Do not touch the contacts on the battery. Static

electricity may cause damage and contamination

of the contacts must be avoided.

WARNING

Figure 3

Figure 4

Andere Handbücher für XTR2

Inhaltsverzeichnis

Andere Testifire Prüfgeräte Handbücher

Testifire

Testifire 1001-1 Bedienungsanleitung

Testifire

Testifire 2000 Series Bedienungsanleitung

Testifire

Testifire XTR2 Bedienungsanleitung

Testifire

Testifire 1000 Series Bedienungsanleitung

Testifire

Testifire 2000 Series Bedienungsanleitung

Testifire

Testifire 25 Bedienungsanleitung

Testifire

Testifire XTR2 Gebrauchs- und Pflegehandbuch

Testifire

Testifire XTR2 Bedienungsanleitung

Testifire

Testifire XTR2 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung