TESTO 0560 8316 Bedienungsanleitung

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere TESTO Thermometer Handbücher

TESTO

TESTO 104 Bedienungsanleitung

TESTO

TESTO 830-T1 Bedienungsanleitung

TESTO

TESTO 106-T1 Bedienungsanleitung

TESTO

TESTO 915i Bedienungsanleitung

TESTO

TESTO 925 Bedienungsanleitung

TESTO

TESTO 106-T2 Bedienungsanleitung

TESTO

TESTO 805 Bedienungsanleitung

TESTO

TESTO 106 Bedienungsanleitung

TESTO

TESTO 835-H1 Handbuch

TESTO

TESTO 230 Bedienungsanleitung

TESTO

TESTO 825-T1 Bedienungsanleitung

TESTO

TESTO 922 Bedienungsanleitung

TESTO

TESTO 830-T1 Bedienungsanleitung

TESTO

TESTO Quicktemp 824-2 Bedienungsanleitung

TESTO

TESTO 104 Bedienungsanleitung

TESTO

TESTO 104-IR Bedienungsanleitung

TESTO

TESTO 922 Bedienungsanleitung

TESTO

TESTO 104 Bedienungsanleitung

TESTO

TESTO 105 Bedienungsanleitung

TESTO

TESTO 905-T1 Bedienungsanleitung

TESTO

TESTO 905-T2 Bedienungsanleitung

TESTO

TESTO 0560 8352 Bedienungsanleitung

TESTO

TESTO 103 Bedienungsanleitung

TESTO

TESTO 925 Bedienungsanleitung

Beliebte Thermometer Handbücher anderer Marken

Delton

Delton 981A Bedienungsanleitung

Baker

Baker MM2P Bedienungsanleitung

Tarmo

Tarmo 320281 Bedienungsanleitung

Citizen

Citizen CTD 504 Bedienungsanleitung

TFA

TFA 14.1500 Bedienungsanleitung

Vive

Vive DMD1010 Bedienungsanleitung

Gotemp

Gotemp THB4002 Bedienungsanleitung

GREISINGER

GREISINGER G 1202 Bedienungsanleitung

Amprobe

Amprobe TMD-53W Bedienungsanleitung

Trotec

Trotec BP10 Bedienungsanleitung

Radiance instruments

Radiance instruments RT616 Series Bedienungsanleitung

Eurolec

Eurolec IR151 Bedienungsanleitung

Scaneo

Scaneo TS42B Bedienungsanleitung

Sper scientific

Sper scientific 800043 Bedienungsanleitung

Microlife

Microlife NC 200 Bedienungsanleitung

Motorola

Motorola MBP69SN Konfigurationshandbuch

The MeatStick

The MeatStick The MeatStick Bedienungsanleitung

Hama

Hama TH35-A Bedienungsanleitung

Instruction manual

testo 831 (0560 8316)

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

7

1. General Information

Please read this document through carefully and familiarise

yourself with the operation of the product before putting it to use.

Keep this documentation to hand so that you can refer to it when

necessary.

2. Product Description

3. Safety Information

Avoid electrical hazards:

Infrared measurement: Please adhere to the required safe

distance when measuring on live parts.

Preserving product safety/warranty claims:

Operate the instrument properly and according to its intended

purpose and within the parameters specified. Do not use

force.

Do not expose to electromagnetic radiation (e.g. microwaves,

induction heating systems), static charge, heat or extreme

fluctuations in temperature.

Do not store together with solvents (e.g. acetone).

Open the instrument only when this is expressly described in

the documentation for maintenance purposes.

Laser radiation!

Do not look into laser beam. Laser class 2.

de

enfresitptsvnl????

Infrared

sensor,

laser

Battery compartment

Display

On/Off switch

Measurement

button:

infrared

measurement

Infrared

measurement

Accessories

Name Item no.

Leather protection

sleeve 0516 8302

Emissivity adhesive tape

ε=0.95 0554 0051

8

Ensure correct disposal:

Dispose of defective rechargeable batteries and spent

batteries at the collection points provided.

Send the instrument directly to us at the end of its life cycle.

We will ensure that it is disposed of in an environmentally

friendly manner.

4. Intended Use

testo 831 is a compact infrared thermometer for the non-contact

measurement of surface temperatures.

Not suitable for diagnostic measurements in the medical

sector!

5. Technical Data

Feature testo 831

Parameter °C/°F

Infrared measurement range -30 to +210°C/-22 to +410°F

Infrared resolution 0.1°C/0.1°F

Infrared accuracy ±1.5°C/1.8°F or 1.5% of reading (-20 to +210°C/-4 to +412°F)1;

(at 23°C/73°F) ±2.0°C/3.6°F or 2.0% of reading (-30 to -20.1°C/-22 to -4°F)1;

+/- 1 digit

Emissivity 0.1 to 1.0 adjustable

Infrared measurement rate 0.5s

Optics (90% value) 30:1 (regarding the distance of

1,0 m to measuring object typically) 2

Operating temperature -20 to +50°C/-4 to +122°F

Transport/Storage temperature -40 to +70°C/-40 to +158°F

Power supply 9V block battery

Battery life 15 h

Housing ABS

Dimensions (LxHxB) 190 x 75 x 38mm/7.5 x 3.0 x 1.5in

CE guideline 2004/108/EEC

Warranty 2 years

Laser

Laser type 2 x laser

Power < 1 mW

Wavelength 645 to 660 nm

Class 2

Standard DIN NE 60825-1:2001-11

1the larger value applies

2+Opening diameter of the sensor (16mm/ 0.6in)

6. Initial Operation

Insert battery: See 9.1 Changing the battery.

9

7. Operation

7.1 Switching on/off

Switch on instrument: Press measurement button.

- All display segments light up briefly. The instrument changes to

the infrared mode ( lights up). The display light remains for

10 seconds every time a button is activated.

Switch off instrument: Keep pressed until display darkens.

The instrument switches off after 1min if no buttons are activated.

7.2 Measuring

Observe information on infrared measurement (chapter 11).

The min./max. values are reset by pressing the measurement

button.

- The instrument is switched on.

Infrared measurement

1Start measurement: Hold down measurement button.

2Locate object to be measured using laser point: Laser marks

the upper and lower end of the measurement spot (at distance

to measurment object from 1,0m; see chapter

11.2 measurement spot, distance).

- The current reading is shown (2 measurements per second)

3End measurement: Release button.

-HOLD lights up. The last measured value and min./max. value

are saved until the next measurement.

Switch between min., max. and recorded value: Press .

Restart measurement: Press measurement button.

Setting the emissivity

- Instrument is in the infrared measurement mode.

If no button is pressed for 3 s in the emissivity mode, the

instrument switches to the infrared measurement mode.

1Press for 3 s.

2Set emissivity: Press or .

- The instrument switches to the infrared measurement mode.

8. Settings

- Instrument is switched off.

If no button is activated in the setting mode for 3 s, the

instrument changes to the next mode.

1Press for 3 s.

- The device switches to settings mode.

de

enfresitptsvnl????

10

2Set lower alarm value ( ALARM): Press or . Hold the

button down to go forward quickly.

3Set upper alarm value ( ALARM): Press or . Hold the

button down to go forward quickly.

4Set alarm function on /oFF: Press or .

5Select parameter (°C / °F) : Press or .

- The device returns to IR measurement view.

If the set alarm values are exceeded/not reached, a visual and

acoustic alarm is output.

9. Service and Maintenance

9.1 Changing the battery

Instrument must be switched off!

1Open battery compartment:

Open up cover.

2Remove used battery and insert new

one. Observe +/-. The minus should be

visible once the battery is inserted.

3Close battery compartment: Close

cover.

9.2 Clean instrument

Do not use abrasive cleaning agents or solutions.

Clean the housing with a damp cloth (soap water).

Carefully clean the lens with water or cotton buds dipped in

water or medical alcohol.

10. Questions and Answers

Query Possible causes Possible solution

Display is no longer illuminated - Low battery. Change battery.

lights up. - Battery empty. Change battery.

Instrument cannot be - Battery empty. Change battery.

switched on

Infrared measurement mode: - Readings outside -

- - - lights up. measurement range.

If we have not answered your question, please contact your local

distributor or Testo´s Customer Service.

11

11. Information on infrared measurement

11.1 Measurement method

Infrared measurement is an optical measurement

Keep lens clean.

Do not measure with clouded lens.

Keep measurement field (area between instrument and object

being measured) free of interferences: no dust and dirt

particles, no moisture (rain, steam) or gases.

Infrared measurement is a surface measurement

If there is dirt, dust, frost etc. on the surface, only the top layer will

be measured, i.e. the dirt.

In the case of shrinkwrapped foodstuffs, do not measure in air

pockets.

If values are critical, always subsequently measure using a

contact thermometer. Particularly in the food sector, the core

temperature should be measured with a penetration/immersion

thermometer.

Adaptation time

If the ambient temperature changes (change of location, e.g.

inside/outside measurement) the instrument needs an adaptation

time of 15 minutes for infrared measurement.

11.2 Measurement spot, Distance

A specific spot is determined depending on the distance from the

measuring instrument to the object being measured.

Measurement optics (Ratio Distance : Measurement spot)

de

enfresitptsvnl????

testo 831

500 mm

700 mm

1000 mm

2000 mm

1500 mm

Ø 16 mm

Ø 18 mm Ø 24 mm

Ø 36 mm

Ø 68 mm

Ø 100 mm

Laser

Laser

0977 8312de en fr es it pt nl 01

Test Equipment Depot - 800.517.8431

99 Washington Street,Melrose, MA 02176

TestEquipmentDepot.com