Testrite Visual Charisma XBX Series Bedienungsanleitung

Page 1 of 2Version: 2

First start by assembling corners. There are three (3) brackets per corner. All extrusion sections are numbered to identify which

pieces go together, 1 with 1, 2 with 2, etc.

1. Insert the at L brackets with the four (4) set screws into the back of one extrusion segment as shown. Identical bracket with no

holes goes between bracket and the extrusion, as shown in the images below. Lightly screw into place, DO NOT fully tighten.

2. For Bent Corner Bracket: Insert the bent bracket into the same extrusion section. Firmly screw the bracket into place. Take the

mating extrusion piece with matching number. Guide the corner brackets in, then tighten all brackets.

3. Repeat assembly steps for the three remaining corners (not shown).

4. Install white backing graphic (See additional page for detailed instructions).

5. WALL MOUNT OPTION: Drill mounting holes in the frame channel as needed, to align with the EXISTING WALL STUDS. Using an X-acto

blade or hole puncher, puncture or cut small holes into the white backing graphic to match the holes just drilled in the frame, then

mount to the wall (Mounting screws and anchors not provided).Install front graphic (See additional page for detailed instructions).

6. Install the graphic (See additional page for detailed instructions).

NOTE: Model shown below may dier from your model, but assembly instructions remain the same.

Charisma™ LED Single Sided Light Box - XBX Series - Without Lights

6. Graphic Installation

(see next page)

4. Backing graphic Installation (see next

page)

White Backing Graphic

XBX34 shown

Wall Mount Holes

are drilled by

customer at time

of installation.

Screw

2a.

White

Backing

Graphic

2c.

2b.

Bracket A

Bracket B

Bracket A

Bracket B

Page 2 of 2Version: 2

1. To install the backing graphic or front graphic, take the corner with the pull tag on it and press about 6”-10”of silicone into the frame channel (g. 1a).

Repeat for the opposite corner (g. 1b). Repeat for the next corner (g. 1c). Lastly, repeat for the nal corner (g. 1d).

2. After all corners are pressed in, press the silicone into the frame channel at the mid-points on all four sides.

3. Press silicone into frame evenly between the corner and midpoints.

This prevents the graphic from bunching up or stretching too much and will ensure a smooth and tight t.

4. To remove the graphic from the frame, simply pull up on the pull tag.

NOTE: Model shown below may dier from your model, but assembly instructions remain the same.

Charisma™ LED Single Sided Light Box - XBX Series - Without Lights

1. 3.2. 4.

1a. pull tag

1b.

1d.

1c.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Testrite Visual Beleuchtungsausrüstung Handbücher

Testrite Visual

Testrite Visual Charisma Inside-Out Light Box XSIO Series Bedienungsanleitung

Testrite Visual

Testrite Visual XSD Series Bedienungsanleitung

Testrite Visual

Testrite Visual Charisma SEG XSL Series Bedienungsanleitung

Testrite Visual

Testrite Visual Charisma SEG 3D Lit XS Series Bedienungsanleitung

Testrite Visual

Testrite Visual SupraSlim SnapFrame SUL Series Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung