Tews Technologies TPCE261-10R Bedienungsanleitung

The Embedded I/O Company

TPCE261

PCI Express x1 PMC Carrier

Version 1.0

User Manual

Issue 1.0.2

January 2022

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7 25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19

e-mail: [email protected] www.tews.com

TPCE261 User Manual Issue 1.0.2 Page 2 of 20

TPCE261-10R

PCI Express x1 Carrier for 32-Bit, 33/66MHz PMC

Modules, 5V PMC I/O signaling voltage, +12V power

supply from PCIe connector used

TPCE261-11R

PCI Express x1 Carrier for 32-Bit, 33/66MHz PMC

Modules, 3.3V PMC I/O signaling voltage, +12V power

supply from PCIe connector used

TPCE261-20R

PCI Express x1 Carrier for 32-Bit, 33/66MHz PMC

Modules, 5V PMC I/O signaling voltage, +12V power

supply from external PCIe graphics power connector

used

TPCE261-21R

PCI Express x1 Carrier for 32-Bit, 33/66MHz PMC

Modules, 3.3V PMC I/O signaling voltage, +12V power

supply from external PCIe graphics power connector

used

This document contains information, which is

proprietary to TEWS TECHNOLOGIES GmbH. Any

reproduction without written permission is forbidden.

TEWS TECHNOLOGIES GmbH has made any

effort to ensure that this manual is accurate and

complete. However TEWS TECHNOLOGIES GmbH

reserves the right to change the product described

in this document at any time without notice.

TEWS TECHNOLOGIES GmbH is not liable for any

damage arising out of the application or use of the

device described herein.

Style Conventions

Hexadecimal characters are specified with prefix 0x,

i.e. 0x029E (that means hexadecimal value 029E).

For signals on hardware products, an ‚Active Low’ is

represented by the signal name with # following, i.e.

IP_RESET#.

Access terms are described as:

W Write Only

R Read Only

R/W Read/Write

R/C Read/Clear

R/S Read/Set

2022 by TEWS TECHNOLOGIES GmbH

All trademarks mentioned are property of their respective owners.

TPCE261 User Manual Issue 1.0.2 Page 3 of 20

Issue Description Date

1.0.0 Initial Issue December 2018

1.0.1 Clarified the maximum PCIe link speed.

The mentioning of PCIe Gen2 might imply a link speed of

5GT/s but the XIO2001 is only capable of 2.5GT/s link speed

March 2019

1.0.2 Order Options -2xR: removed the PCIe VGA power connector

adapter cable

January 2022

TPCE261 User Manual Issue 1.0.2 Page 4 of 20

Table of Contents

1 PRODUCT DESCRIPTION ........................................................................................... 6

2 TECHNICAL SPECIFICATION ..................................................................................... 7

3 HANDLING AND OPERATING INSTRUCTIONS ......................................................... 8

ESD Protection ................................................................................................................................8

Installation of TPCE261-2xR ..........................................................................................................8

4 PMC INTERFACE ......................................................................................................... 9

Installation of a PMC Module .........................................................................................................9

PCI Signaling Voltage .....................................................................................................................9

PCIe-to-PCI Bridge Header...........................................................................................................10

PCI Bus Device Number Mapping ...............................................................................................10

PCI Clock Frequency ....................................................................................................................10

PMC BUSMODE[4:1] Signals .......................................................................................................11

Stable Power Supply.....................................................................................................................11

Power Limits for PMC Modules ...................................................................................................11

5 INDICATORS .............................................................................................................. 12

LED Indicators...............................................................................................................................12

6 JTAG ........................................................................................................................... 13

USB Type C Connector ................................................................................................................13

JTAG voltage for PMC Module ....................................................................................................13

7 PIN ASSIGNMENTS ................................................................................................... 14

J11 – PMC Connector ...................................................................................................................14

J12 – PMC Connector ...................................................................................................................15

J14 to X4 – PMC I/O Connector ...................................................................................................16

X5 – 14-pin JTAG Header .............................................................................................................18

J4 – XIO2001 JTAG Connector ....................................................................................................19

X3 – PCIe VGA Graphics Power Connector ...............................................................................20

TPCE261 User Manual Issue 1.0.2 Page 5 of 20

List of Figures

FIGURE 1-1 : TPCE261 BLOCK DIAGRAM .....................................................................................................6

FIGURE 5-1 : ON-BOARD LED PLACEMENT ...............................................................................................12

FIGURE 6-1 : JTAG VOLTAGE ROTARY SELECTOR SWITCH LOCATION (TOP VIEW OF TPCE261) ...13

FIGURE 7-1 : J14 REAR-I/O CONNECTOR LOCATION (TOP VIEW OF TPCE261) ...................................17

FIGURE 7-2 : JTAG CONNECTOR LOCATION (TOP VIEW OF TPCE261) .................................................18

FIGURE 7-3 : J4 – XIO2001 JTAG CONNECTOR POSITION (TOP VIEW OF TPCE261) ...........................19

List of Tables

TABLE 2-1 : TECHNICAL SPECIFICATION.....................................................................................................7

TABLE 4-1 : TPCE261 PCI SIGNALING VOLTAGE KEYING...........................................................................9

TABLE 4-2 : TPCE261 PCI SIGNALING VOLTAGE FACTORY DEFAULTS ...................................................9

TABLE 4-3 : PCIE ID CONFIGURATION........................................................................................................10

TABLE 4-4 : PCI BUS DEVICE NUMBER MAPPING......................................................................................10

TABLE 4-5 : TPCE261 PMC BUSMODE[4:1] SIGNALS .................................................................................11

TABLE 4-6 : CURRENT LIMITS FOR THE PMC MODULES.........................................................................11

TABLE 5-1 : ON-BOARD LED DESCRIPTION...............................................................................................12

TABLE 6-1 : ROTARY SELECTOR SWITCH CONFIGURATION..................................................................13

TABLE 7-1 : PMC J11/P11 PIN ASSIGNMENT...............................................................................................14

TABLE 7-2 : PMC J12/P12 PIN ASSIGNMENT...............................................................................................15

TABLE 7-3 : X4 - J14 I/O PIN ASSIGNMENT.................................................................................................16

TABLE 7-4 : X5 – 14-PIN JTAG HEADER PIN ASSIGNMENT ......................................................................18

TABLE 7-5 : J4 CONNECTOR TYPE .............................................................................................................19

TABLE 7-6 : X3 – 6-PIN AUXILLIARY POWER CONNECTOR .....................................................................20

TPCE261 User Manual Issue 1.0.2 Page 6 of 20

1 Product Description

The TPCE261 is a standard height PCI Express Revision 2.0 compatible module that provides one slot for a

single-width PMC module used to build modular, flexible and cost effective I/O solutions for all kinds of

applications like process control, medical systems, telecommunication and traffic control. The TPCE261 is a

versatile solution to upgrade well known PMC I/O solutions to the PCI Express signaling standard.

On the PCI Express side, an x1 link with 2.5GT/s speed to the host board is provided.

The bridging between the system host board and the PMC slot is handled by the transparent PCIe-to-PCI

Bridge XIO2001 from Texas Instruments.

On the PMC side, PCI signaling voltages of 3.3V (TPCE261-x1R) and 5V (TPCE261-x0R) are supported. 32-

bit PCI accesses are possible with 33MHz or 66MHz.

The TPCE261 supports PMC front-panel I/O and also PMC P14 Rear-I/O through a 68-pin ERNI SMC

1.27mm flat cable connector.

The PCIe edge card connector provides +12V and +3.3V. All TPCE261-xx variants do not use the +3.3V at

all. The TPCE261-1xR uses the +12V of the PCIe edge card connector to generate all four power supply

voltages for the PMC slot (+3.3V, +5V, +12V and -12V). According to the PCIe specification, a PCIe x1 card

is limited to 6W on the +12V which allows to operate most of the available 32-bit 33/66 MHz PMC modules

on the TPCE261-1xR.

For PMC modules with increased power requirements, the TPCE261-2xR offer an additional PCIe Graphics

Power Connector to supply the +12V for generating all the power supply voltages for the PMC slot providing

a power of up to 25W.

PCIe (x1)

PCI

32 bit

33/66 MHz

PCIe: +3.3V

PCIe: +12V

PCI Express

PCI

Bridge

-12V DC

5V DC

3.3V DC

+12V Graphics

Power

Connector

VI/O

+3.3V

+5V

-12V

+12V

TPCE261-2x

TPCE261-1x

TPCE261-x0

TPCE261-x1

I/O

J12

J11

Figure 1-1 : TPCE261 Block Diagram

TPCE261 User Manual Issue 1.0.2 Page 7 of 20

2 Technical Specification

Mechanical and Electrical Interfaces

PCI Express PCI Express x1, Revision 2.0

max. 2.5GT/s link speed

Standard Height

Half-Length

PMC Slot PCI Mezzanine Card (PMC) Interface conforming to

IEEE P1386/P1386.1

Single-Width

PCI Rev. 2.3 compliant

33/66 MHz / 32-Bit PCI

3.3V and 5V PCI Signaling Voltage

PMC Interface

Number of PMC Slots 1

PMC I/O Access PMC Front Panel I/O

PMC P14 Rear-I/O through 68-pin ERNI SMC, right angle male,

1.27mm pitch connector

Maximum Current for P14 Rear I/O Lines is 0.5A!

On-Board Devices

PCIe-to-PCI Bridge XIO2001 (Texas Instruments)

Physical Data

Power Requirements - @ +3.3V DC

100mA maximum @ +12V DC

Additional power is required by the PMC Module!

Power Stable for PMC Slot The power supply for the PMC slot is stable approximately 5ms

after the system power supply is stable.

Maximum Power for PMC Slot The maximum power available for a PMC module is variant

dependent. Please see chapter “Power Limits for PMC Modules”

for detailed information.

Temperature Range Operating

Storage

-40°C to +85°C

MTBF TPCE261-1xR: 599000h

TPCE261-2xR: 533000h

MTBF values shown are based on calculation according to MIL-HDBK-217F and

MIL-HDBK-217F Notice 2; Environment: GB20°C.

The MTBF calculation is based on component FIT rates provided by the

component suppliers. If FIT rates are not available, MIL-HDBK-217F and

MIL-HDBK-217F Notice 2 formulas are used for FIT rate calculation.

Humidity 5 – 95 % non-condensing

Weight TPCE261-1xR: 97 g

TPCE261-2xR: 99 g

Table 2-1 : Technical Specification

TPCE261 User Manual Issue 1.0.2 Page 8 of 20

3 Handling and Operating Instructions

ESD Protection

The TPCE261 is sensitive to static electricity. Packing, unpacking

and all other handling of the TPCE261 has to be done in an ESD/EOS

protected Area.

Installation of TPCE261-2xR

For the TPCE261-2xR variants, it is imperative to always connect a

PCI Express VGA power connector to the TPCE261, even if no PMC

is mounted.

TPCE261 User Manual Issue 1.0.2 Page 9 of 20

4 PMC Interface

Installation of a PMC Module

The PMC modules are mounted to the TPCE261 prior to installation into the system.

Before installing a PMC module, be sure that the power supply for the TPCE261 is turned off.

The components are Electrostatic Sensitive Devices (ESD). Use an anti-static mat connected to

a wristband when handling or installing the components.

After the PMC module has been installed, it can be secured on the TPCE261 using the mounting screws that

come with the PMC module. There are four screw mounting locations, two at the PMC front panel and two at

the standoffs near the PMC bus connectors.

PCI Signaling Voltage

PMC modules are specified either for 3.3V only, 5V only or universal (3.3V or 5V) PCI signaling voltage

operation.

The TPCE261 onboard V_I/O voltage level defines the PCI signaling voltage level for the TPCE261 PCI bus.

A voltage keying pin indicates (and also selects) the voltage level and prevents incompatible PMC modules

from being plugged onto the carrier.

Table 4-1 : TPCE261 PCI Signaling Voltage Keying

V_I/O Configuration 5V Keying Pin 3.3V Keying Pin

5V (-x0R) Installed Not Installed

3.3V (-x1R) Not Installed Installed

Table 4-2 : TPCE261 PCI Signaling Voltage Factory Defaults

TPCE261 User Manual Issue 1.0.2 Page 10 of 20

PCIe-to-PCI Bridge Header

ID Type ID Setting (Description)

Vendor ID 0x104C (Texas Instruments)

Device ID 0x8231 (XIO2001)

Revision ID 0x00

Subsystem ID 0x0000

Subsystem Vendor ID 0x0000

Class Code 0x060400 (PCI-to-PCI Bridge)

Table 4-3 : PCIe ID Configuration

PCI Bus Device Number Mapping

The PCI bus device number of the PMC slot is defined by configuration type translation of the PCI-Express

to PCI Bridge.

By default, the PMC slot is mapped to the bus device number 0x0.

PCI Bus Device

Number (HEX)

PCI AD Line

used as PMC

IDSEL

Purpose

0x0 16 Default IDSEL for PMC Slot

0x1

0x2

0x3

Not used on TPCE261

0x4 20 Optional IDSEL for PMC Slot

0x5

0xF

Not used on TPCE261

Table 4-4 : PCI Bus Device Number Mapping

PCI Clock Frequency

The TPCE261 supports 66 MHz PCI clock frequency. The actual PCI clock frequency on the TPCE261 is

configured by the plugged PMC module. If the plugged PMC module supports 66 MHz operation, the PCI

bus will operate with 66 MHz; otherwise it will operate with 33 MHz.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tews Technologies Computerhardware Handbücher

Tews Technologies

Tews Technologies TVME201 Bedienungsanleitung

Tews Technologies

Tews Technologies TA900 Bedienungsanleitung

Tews Technologies

Tews Technologies TDRV003-SW-65 Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC321 Bedienungsanleitung

Tews Technologies

Tews Technologies TMPE633 Bedienungsanleitung

Tews Technologies

Tews Technologies TIP815-SW-12 Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC463 Bedienungsanleitung

Tews Technologies

Tews Technologies TMPE627 Bedienungsanleitung

Tews Technologies

Tews Technologies TXMC638 Bedienungsanleitung

Tews Technologies

Tews Technologies TAMC020-TM Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC551-SW-95 Bedienungsanleitung

Tews Technologies

Tews Technologies TAMC261 Bedienungsanleitung

Tews Technologies

Tews Technologies TCP270 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung