Texas Instruments Titanium TI-89 Bedienungsanleitung

Using a Scientific Calculator

•How much memory does the TI 89 have?

•The TI-89 has 188k of RAM and 384k of memory that

can be used for archiving programs, making a total

memory of 572k

•How large is the TI-89's screen?

•The TI-89's screen is 160x100 pixels

Hardware on the TI-89

•What type of processor does the TI-89 have?

•The TI-89, like the TI-92 and TI-92 Plus, uses a 68k

Motorola processor.

•The processors are 10 MHz.

•On TI-89 Titanium they are 12 MHz.

•You can double the speed of the TI-89 by over

clocking.

•Information about this is located at the TI-89

Acceleration Pages.

•Note: this is a risky process that could potentially

damage your calculator.

Hardware on the TI-89

•Step 1 Type in the number you wish to

convert. Then press the blue 2nd key

followed by the blue Units key (the #3 on

your keypad).

•Step 2 A list will pop up. Scroll down to

select the category for your unit, then use the

right arrow key and the down/up keys to

make your selection.

•Step 3 Here we wish to convert 3 ft to

meters. This is a unit of length, so the Length

category has been selected, and ft has been

chosen for our original unit. (Note, you may

also type in the unit if you know the

abbreviation).

•Step 4 To convert the units, press the 2nd

key again and then the convert key (the blue

triangle pointing to the right, above the Mode

key).

2nd Key

Units Key

Converter Key

•Step 1 Input a decimal you wish to see as a fraction such as:

.56

•Step 2 Hit MODE and scroll down to Exact/Approx and hit

Exact. The screen will come back to your home screen and the

number you wanted to change to fraction will be in the input

bar.

•Step 3 Hit enter and the screen should come up with

something like this: .56 4/25

•Step 1 Input fraction in home input bar.

•Step 2 Hit MODE and scroll down to Exact/Approx and hit

Approx. The screen will come back to your home screen and

the number you wanted to convert to decimal will be in the

input bar.

•Step 3 Hit enter and the screen will come up with:

14/ 25 .56

There are 3 different modes in the TI 89 calculator.

•The first one is Normal this means that:

34.2

+ 34.5

68.7

•The next selectable mode is Scientific. This means that:

34.2

+ 34.5

6.87e1

•The last mode is Engineering. This means that:

34.2

+ 34.5

68.7e0

•Step 1 Go into your MODE and scroll down until you reach

Exact/Approx and change it to Exact.

•Step 2 Type in what you would like to convert to binary such as 455 in

the address box at the bottom of the main screen.

•Step 3 Hit the blue 2nd and the number 5. This will take you to the

MATH menu.

•Step 4 Find the Base and hit the >. This will take you to another

screen.

•Step 5 Hit 4 for Binary. You will return to the home screen with the

number you wanted converted with a > Bin. It will appear as 455 >Bin.

•Step 6 Hit enter to display your decimal number in Binary format.

This function will allow you to solve for a specific variable. For

example, solve for: 3x^3-2x*y+3y=2

•Step 1 On your home screen press F2 and then press 1 or enter.

•Step 2 Enter in the equation after solve as:

solve(3x^3-2x*y+3y=2,y)

•Step 3 Press enter and it will solve for y.

You can also solve for a system of equations using the solve

function. For example: 3x-5y=4 and -2x+5y=6

•Step 1 On your home screen press F2 and then press 1 or enter .

•Step 2 Enter in the equation after solve as so: solve(3x-5y=4

and -2x+5y=6, {x,y}). *You can access the word and by

pressing 2ND , 5, 8, 8.

•Step 3 Press enter and it will solve for x and y.

Like the solve function, you can use the matrix function to solve

for a system of equations. For example:

3x-5y=4 and -2x+5y=6

•Step 1 Press 2nd 5(MATH), 4(Matrix), and then 5(simult).

•Step 2 Enter the coefficients as a matrix and the results as a

constant column matrix as so: simult([3,-5;-2,5],[4;6])

•Step 3 Press enter. The value for xon top and yon bottom.

Using the same equations, you can solve for x and y using the rref

function.

•Step 1 Press 2nd 5(MATH), 4(Matrix), and then 4(rref).

•Step 2 Enter an augmented matrix, this contains the variables x,

y, and c where c is the constant. It should look like this: rref([3,-

5,4;-2,5,6])

•Step 3 Press enter; xis on top, yis on bottom.

Andere Handbücher für Titanium TI-89

Andere Texas Instruments Kalkulator Handbücher

Texas Instruments

Texas Instruments TI-84 - Plus - Edition Graphing Calculator Bedienungsanleitung

Texas Instruments

Texas Instruments TI-15 Bedienungsanleitung

Texas Instruments

Texas Instruments TI-1795 Bedienungsanleitung

Texas Instruments

Texas Instruments TI-73 Explorer Bedienungsanleitung

Texas Instruments

Texas Instruments TI-5045SVC Handbuch

Texas Instruments

Texas Instruments TI-31 Solar Bedienungsanleitung

Texas Instruments

Texas Instruments TI-82 STATS Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Bedienungsanleitung

Texas Instruments

Texas Instruments TI-92 Bedienungsanleitung

Texas Instruments

Texas Instruments BA II Plus Bedienungsanleitung

Texas Instruments

Texas Instruments TI-Nspire CX Bedienungsanleitung

Texas Instruments

Texas Instruments Voyage 200 Handbuch

Texas Instruments

Texas Instruments Titanium TI-89 Bedienungsanleitung

Texas Instruments

Texas Instruments TI-30XS Multiview Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 - Plus Graphing Calculator Kurzanleitung

Texas Instruments

Texas Instruments TI-Nspire Bedienungsanleitung

Texas Instruments

Texas Instruments TI-30X - IIS Scientific Calculator Bedienungsanleitung

Texas Instruments

Texas Instruments Titanium TI-89 Bedienungsanleitung

Texas Instruments

Texas Instruments Tl-84 Plus CE Bedienungsanleitung

Texas Instruments

Texas Instruments TI-73 Explorer Kurzanleitung

Texas Instruments

Texas Instruments TI-Nspire Bedienungsanleitung

Texas Instruments

Texas Instruments TI-30X - IIS Scientific Calculator Bedienungsanleitung

Texas Instruments

Texas Instruments TI-81 Handbuch

Texas Instruments

Texas Instruments TI-84 - Plus - Edition Graphing Calculator Bedienungsanleitung

Beliebte Kalkulator Handbücher anderer Marken

HP 35s Handbuch

Casio

Casio CFX-9970G Bedienungsanleitung

LEXIBOOK

LEXIBOOK EL350 Bedienungsanleitung

HP HP-97 Bedienungsanleitung

Citizen

Citizen SDC-414N Bedienungsanleitung

Casio

Casio fx-3800P Bedienungsanleitung

Canon

Canon P26-DHIII Bedienungsanleitung

Citizen

Citizen 520DPA Bedienungsanleitung

Sharp

Sharp EL-9900 Bedienungsanleitung

Casio

Casio FX-9860GII - SOFTWARE VERSION 2-00 Bedienungsanleitung

Casio

Casio MS-7UC Bedienungsanleitung

Sharp

Sharp WriteView EL-W506 Technisches Handbuch

Casio

Casio FC-200 Bedienungsanleitung

Casio

Casio fx-CG50 Bedienungsanleitung

HP HP-67 Benutzerhandbuch

Royal

Royal CBC2000 Bedienungsanleitung

Heathkit

Heathkit IC-2009 Bedienungsanleitung

Universal

Universal UNV-15907 Bedienungsanleitung