Texas Instruments 66AK2Gx Bedienungsanleitung

Dieses Handbuch passt für folgende Modelle

1

Andere Texas Instruments Hauptplatine Handbücher

Texas Instruments

Texas Instruments TLV767EVM-014 Bedienungsanleitung

Texas Instruments

Texas Instruments CSD87588NEVM-603 Bedienungsanleitung

Texas Instruments

Texas Instruments BQ25175EVM Bedienungsanleitung

Texas Instruments

Texas Instruments Stellaris LM3S3748 Handbuch

Texas Instruments

Texas Instruments AM62-SIP SK Series Bedienungsanleitung

Texas Instruments

Texas Instruments LM36010EVM Bedienungsanleitung

Texas Instruments

Texas Instruments TPS51123 Bedienungsanleitung

Texas Instruments

Texas Instruments TPS549D22 Bedienungsanleitung

Texas Instruments

Texas Instruments SN6507DGQEVM Bedienungsanleitung

Texas Instruments

Texas Instruments TPS60250EVM-185 Bedienungsanleitung

Texas Instruments

Texas Instruments LMH9226RRL-EVM Bedienungsanleitung

Texas Instruments

Texas Instruments TPS2596EVM Bedienungsanleitung

Texas Instruments

Texas Instruments ADS7041EVM-PDK Bedienungsanleitung

Texas Instruments

Texas Instruments ADS131E08 Bedienungsanleitung

Texas Instruments

Texas Instruments TVS 0 Series Bedienungsanleitung

Texas Instruments

Texas Instruments BoosterPack AM2 BLDC Series Bedienungsanleitung

Texas Instruments

Texas Instruments AN-1955 LM5009A Bedienungsanleitung

Texas Instruments

Texas Instruments REF54EVM Bedienungsanleitung

Texas Instruments

Texas Instruments INA209 Bedienungsanleitung

Texas Instruments

Texas Instruments SoundPlus INA1651EVM Bedienungsanleitung

Texas Instruments

Texas Instruments BQ24150 Bedienungsanleitung

Texas Instruments

Texas Instruments TDC7201-ZAX-EVM Bedienungsanleitung

Texas Instruments

Texas Instruments RF430F5978EVM Bedienungsanleitung

Texas Instruments

Texas Instruments TLC59282EVM Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung

Demonstrating

U-Boot from SPI/QSPI for 66AK2G

SPI

Master

SPI

Slave

Quad-SPI

Master

SPI

Slave

K2G EVM Console capture SPI NOR boot configuration

To tftp get the prebuilt .gph file to the EVM memory, set up the tftp server and

configure serverip and tftp_root of the u-boot environment variables:

=> setenv serverip 158.218.109.194

=> setenv tftp_root psdk4209-keg

Once these are set up and in u-boot prompt, run the u-boot script get_uboot_net

to retrieve the file, and burn_uboot_spi to program the NOR flash:

=> run get_uboot_net

=> run burn_uboot_spi

K2G GP EVM Technical Reference Manual

http://www.ti.com/lit/sprui65a

K2G EVM Console Capture QSPI configuration

To retrieve the MLO from SD card, be sure the mmc is responding by

rescanning it. Then, load the MLO file from mmc with fatload command.

=> mmc rescan

=> fatload mmc 0 ${loadaddr} MLO

To retrieve the file from network, the tftp server needs to be set up, and

the serverip and ipaddr of the u-boot environment variables need to be

set. Then, tftp the prebuilt MLO file from the tftp server.

=> setenv serverip tftp.server.ip.addr

=> setenv ipaddr evm.ip.addr

=> tftp ${loadaddr} ${serverip}:psdk4209-k2g/MLO-k2g-evm

K2G GP EVM Technical Reference Manual

http://www.ti.com/lit/sprui65a

K2G EVM Console capture: Kernel boot

In this example, the network boot is used with an NFS-mounted

filesystem. With this kernel boot option, the u-boot environment

variables boot, serverip, nfs_root, and tftp_root need to be

configured:

=> setenv boot net

=> setenv serverip 158.218.109.194

=> setenv nfs_root /nfs/nfs_fs1

=> setenv tftp_root psdk4209-keg

Once configured, the system will be able to boot to the kernel prompt.

For More Information

•66AK2x Multicore DSP + ARM Processors:

http://www.ti.com/processors/dsp/c6000-dsp-arm/66ak2x/overview.html

•Processor SDK for 66AK2Gxx Processor:

http://www.ti.com/tool/processor-sdk-K2G

•Evaluation Modules for the 66AK2Gxx User’s Guide (TRM):

http://www.ti.com/lit/sprui65

•Processor SDK U-boot User’s Guide:

http://processors.wiki.ti.com/index.php/Linux_Core_U-Boot_User%27s_Guide

•For questions about this training, refer to the E2E Community Forums for Sitara

Processors at http://e2e.ti.com/support/arm/sitara_arm/f/791/t/277411