Texas Instruments ADS1202EVM Bedienungsanleitung

ADS1202 Modular EVM

August 2003 Data Acquisition - Digital/Analog Converters)

User’s Guide

SLAU111

All manuals and user guides at all-guidesbox.com

all-guidesbox.com

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,

enhancements, improvements, and other changes to its products and services at any time and to discontinue

any product or service without notice. Customers should obtain the latest relevant information before placing

orders and should verify that such information is current and complete. All products are sold subject to TI’s terms

and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in

accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI

deems necessary to support this warranty. Except where mandated by government requirements, testing of all

parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for

their products and applications using TI components. To minimize the risks associated with customer products

and applications, customers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,

in which TI products or services are used. Information published by TI regarding third-party products or services

does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.

Use of such information may require a license from a third party under the patents or other intellectual property

of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is without

alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction

of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for

such altered documentation.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that

product or service voids all express and any implied warranties for the associated TI product or service and

is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Following are URLs where you can obtain information on other Texas Instruments products & application

solutions:

Products Applications

Amplifiers amplifier.ti.com Audio www.ti.com/audio

Data Converters dataconverter.ti.com Automotive www.ti.com/automotive

DSP dsp.ti.com Broadband www.ti.com/broadband

Interface interface.ti.com Digital Control www.ti.com/digitalcontrol

Logic logic.ti.com Military www.ti.com/military

Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork

Microcontrollers microcontroller.ti.com Secruity www.ti.com/security

Telephony www.ti.com/telephony

Video & Imaging www.ti.com/video

Wireless www.ti.com/wireless

Mailing Address: Texas Instruments

Post Office Box 655303 Dallas, Texas 75265

All manuals and user guides at all-guidesbox.com

EVM IMPORTANT NOTICE

Texas Instruments (TI) provides the enclosed product(s) under the following conditions:

This evaluation kit being sold by TI is intended for use for ENGINEERING DEVELOPMENT OR EVALUATION

PURPOSES ONLY and is not considered by TI to be fit for commercial use. As such, the goods being provided

may not be complete in terms of required design-, marketing-, and/or manufacturing-related protective

considerations, including product safety measures typically found in the end product incorporating the goods.

As a prototype, this product does not fall within the scope of the European Union directive on electromagnetic

compatibility and therefore may not meet the technical requirements of the directive.

Should this evaluation kit not meet the specifications indicated in the EVM User’s Guide, the kit may be returned

within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE

WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED,

IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY

PARTICULAR PURPOSE.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user

indemnifies TI from all claims arising from the handling or use of the goods. Please be aware that the products

received may not be regulatory compliant or agency certified (FCC, UL, CE, etc.). Due to the open construction

of the product, it is the user’s responsibility to take any and all appropriate precautions with regard to electrostatic

discharge.

EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE

TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

TI currently deals with a variety of customers for products, and therefore our arrangement with the user is not

exclusive.

TI assumesno liability for applications assistance, customer product design, software performance, or

infringement of patents or services described herein.

Please read the EVM User’s Guide and, specifically, the EVM Warnings and Restrictions notice in the EVM

User’s Guide prior to handling the product. This notice contains important safety information about temperatures

and voltages. For further safety concerns, please contact the TI application engineer.

Persons handling the product must have electronics training and observe good laboratory practice standards.

No license is granted under any patent right or other intellectual property right of TI covering or relating to any

machine, process, or combination in which such TI products or services might be or are used.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

All manuals and user guides at all-guidesbox.com

EVM WARNINGS AND RESTRICTIONS

It is important to operate this EVM within the input voltage range of ±125 mV and the output

voltage range of 0 V to 5 V.

Exceeding the specified input range may cause unexpected operation and/or irreversible

damage to the EVM. If there are questions concerning the input range, please contact a TI

field representative prior to connecting the input power.

Applying loads outside of the specified output range may result in unintended operation and/or

possible permanent damage to the EVM. Please consult the EVM User’s Guide prior to

connecting any load to the EVM output. If there is uncertainty as to the load specification,

please contact a TI field representative.

During normal operation, some circuit components may have case temperatures greater than

23°C. The EVM is designed to operate properly with certain components above 50°C as long

as the input and output ranges are maintained. These components include but are not limited

to linear regulators, switching transistors, pass transistors, and current sense resistors. These

types of devices can be identified using the EVM schematic located in the EVM User’s Guide.

When placing measurement probes near these devices during operation, please be aware

that these devices may be very warm to the touch.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

All manuals and user guides at all-guidesbox.com

Information About Cautions and Warnings

iii

Preface

Read This First

About This Manual

This users guide describes the characteristics, operation, and use of the

ADS1202 Modular EVM. A complete circuit description as well as schematic

diagram is included.

How to Use This Manual

This document contains the following chapters:

-Chapter 1—EVM Overview

-Chapter 2—Power Supply Options

-Chapter 3—EVM Operation

-Chapter 4—ADS1202 Modular EVM BOM and Schematic

Information About Cautions and Warnings

This book may contain cautions and warnings.

This is an example of a caution statement.

A caution statement describes a situation that could potentially

damage your software or equipment.

This is an example of a warning statement.

A warning statement describes a situation that could potentially

cause harm to you.

All manuals and user guides at all-guidesbox.com

Trademarks

The information in a caution or a warning is provided for your protection.

Please read each caution and warning carefully.

Related Documentation From Texas Instruments

To obtain a copy of any of the following TI documents, call the Texas

Instruments Literature Response Center at (800) 477-8924 or the Product

Information Center (PIC) at (972) 644-5580. When ordering, please identify

this booklet by its title and literature number. Updated documents can also be

obtained through our website at www.ti.com.

Data Sheet: Literature Number:

ADS1202 SBAS275

User’s Guide: Literature Number:

5-6K Interface Board EVM SLAU104

FCC Warning

This equipment is intended for use in a laboratory test environment only. It gen-

erates, uses, and can radiate radio frequency energy and has not been tested

for compliance with the limits of computing devices pursuant to subpart J of

part 15 of FCC rules, which are designed to provide reasonable protection

against radio frequency interference. Operation of this equipment in other en-

vironments may cause interference with radio communications, in which case

the user at his own expense will be required to take whatever measures may

be required to correct this interference.

Trademarks

TI logo is a trademark of Texas Instruments.

All manuals and user guides at all-guidesbox.com

all-guidesbox.com

Contents

1 EVM Overview 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1 Analog Interface 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Digital Interface 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Power Supply Options 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 EVM Operation 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 ADS1202 Modular EVM BOM and Schematic 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.1 ADS1202 Modular EVM BOM 4-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.2 Schematic 4-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tables

4-1. Bill of Materials 4-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

All manuals and user guides at all-guidesbox.com

1-1

EVM Overview

The ADS1202 modular EVM provides direct modulator output to a host

processor and allows all operating modes of the ADS1202. It provides various

isolation options for a variety of applications.

The new modular EVM form factor allows for direct evaluation of the ADC’s

performance and operating characteristics. This EVM is compatible with the

5-6K Interface Board (SLAU104) from Texas Instruments.

-Direct modulator output

-Various isolation options

-Direct operation with a variety of DSK platforms from Texas

Instruments

Topic Page

1.1 Analog Interface 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Digital Interface 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 1

All manuals and user guides at all-guidesbox.com

Analog Interface

1-2

1.1 Analog Interface

The ADS1202 modular EVM is designed for easy interfacing to multiple analog

sources. Samtec part numbers SSW-110-22-F-D-VS-K and

TSM-110-01-T-DV-P provide a convenient 10-pin dual row header/socket

combination at J1. Connector J1 provides access to the ADS1202 input pins.

The modulator + input terminal is connected to pin 2, the - input terminal is

connected to pin 4. Pins 1-19 are connected to analog ground.

1.2 Digital Interface

The ADS1202 modular EVM is designed for easy interfacing to multiple control

platforms. Samtec part numbers SSW-110-22-F-D-VS-K and

TSM-110-01-T-DV-P provide a convenient 10-pin dual row header/socket

combination at J2. This header/socket combination provides access to the

clock and data output pins of the ADS1202 Sigma Delta modulator.

Signal Description

J2.1 Unused

J2.3 SCLK Serial clock input (for use with MODE 3 Operation)

J2.5 CLKR Modulator clock output (for use with MODES 0, 1 and 2)

J2.7 Unused

J2.9 Unused

J2.11 Unused

J2.13 SDO Bit stream data output from ADS1202

J2.15 Unused

J2.17 Unused

J2.19 SPARE

All manuals and user guides at all-guidesbox.com

Inhaltsverzeichnis

Andere Texas Instruments Hauptplatine Handbücher

Texas Instruments

Texas Instruments TPS65023EVM Bedienungsanleitung

Texas Instruments

Texas Instruments TLVM13610EVM Bedienungsanleitung

Texas Instruments

Texas Instruments DRV8873 EVM Series Bedienungsanleitung

Texas Instruments

Texas Instruments DLP LightCrafter Display 3010 Bedienungsanleitung

Texas Instruments

Texas Instruments TPSM63608 Bedienungsanleitung

Texas Instruments

Texas Instruments TLV320AIC3256EVM-U Bedienungsanleitung

Texas Instruments

Texas Instruments BQ25303J Bedienungsanleitung

Texas Instruments

Texas Instruments EVM430-FR6989 Bedienungsanleitung

Texas Instruments

Texas Instruments INA253EVM Bedienungsanleitung

Texas Instruments

Texas Instruments DP83561EVM Bedienungsanleitung

Texas Instruments

Texas Instruments ADS7043EVM-PDK Bedienungsanleitung

Texas Instruments

Texas Instruments ADC-PHI-PRU-EVM Bedienungsanleitung

Texas Instruments

Texas Instruments TMUX-24PW-EVM Bedienungsanleitung

Texas Instruments

Texas Instruments CSD87588NEVM-603 Bedienungsanleitung

Texas Instruments

Texas Instruments TLV62080 Bedienungsanleitung

Texas Instruments

Texas Instruments LDC131 Series Bedienungsanleitung

Texas Instruments

Texas Instruments TAS5766MDCAEVM Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320C6745 DSP Bedienungsanleitung

Texas Instruments

Texas Instruments ADS64XX EVM Bedienungsanleitung

Texas Instruments

Texas Instruments BoosterPack BOOSTXL-IOLINKM-8 EVM Bedienungsanleitung

Texas Instruments

Texas Instruments AFE882H1 Bedienungsanleitung

Texas Instruments

Texas Instruments ADS1282EVM Bedienungsanleitung

Texas Instruments

Texas Instruments TPS61059EVM-141 Bedienungsanleitung

Texas Instruments

Texas Instruments IWR1443BOOST Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung