Texas Instruments Chipcon CC2400DBK Programmierhandbuch

SWRU047

Page 1 of 2

Quick Start Instructions

CC2400DBK Demonstration Board Kit

Introduction

The CC2400 single chip RF transceiver provides a highly integrated, very flexible low-cost

solution for applications using the worldwide 2.4 GHz frequency band. The CC2400DBK

demonstration board kit is designed to make it easy for the user to prototype software source

code with the use an Atmega8 SPI interface to the CC2400 and get up to speed

implementing applications very quickly.

The CC2400DBK includes two CC2400DB Demonstration Boards. The CC2400DB contains

the CC2400 chip and required external components together with the Atmega8

microcontroller.

The CC2400DB serves as a prototype platform for the CC2400 software development with an

Atmega8 microcontroller. The CC2400DB provides an RS-232 connection, button, joystick,

three Light Emitting Diodes, voltage regulation, temperature sensor and connectors to make it

easy to interface to test equipment such as a logic analyzer, and other extension boards.

The hardware is documented in the CC2400DK User Manual, while SmartRF®Studio is used

to obtain register settings for the CC24000DB software. All documentation and software can

be downloaded from Chipcon’s web site. Please visit Chipcon’s web site regularly for updates

to the documentation and software.

Getting started

1. Connect the CC2400DB to an external power supply. When shipped, the CC2400DB

can be used with a 4 -10 volt power supply (ex. AC-to DC adapter) or a 9 volt battery.

If you need to change the voltage settings, please see the CC2400DBK User Manual

for details.

2. Install SmartRF®Studio and Atmel AVR Studio software on a PC if you have not

already done this. Follow the instructions given by the installation programs. The PC

must be running Windows 98 or newer for SmartRF®Studio. Please check

appropriate OS compatibility with the AVR Studio Software documentation.

3. Use the supplied RS-232 cable to connect the CC2400DB and the PC together. This

port is used with the bootloader and the AVR Studio. For details see the CC2400DBK

User Manual.

4. Apply correct power to the two CC2400DB.

5. Reset CC2400DB

6. By pushing the S2 button on the CC2400DB board you will start the rfBlinkLed

application example that is already programmed into the application section of the

processor flash. The demonstration board with the S2 button pushed is the

transmitter and the yellow LED will start to blink if an RF link is obtained. On the

receiver demonstration board the green LED will be blinking. If a bad packet (no

acknowledgement from receiver) occurs the red LED will blink. For detailed

documentation, please see the CC2400DBK User Manual.

7. You can now use this application program to test the RF range with the PCB antenna

connected to the CC2400 chip.

SWRU047

Page 2 of 2

Figure 1: CC2400DB Demonstration Board

1.8V voltage

regulator

Optional 9V

battery Leds

4-10 V

DC-jack

Temp. sensor

CC2400 RF

section

PCB

antenna

buttons

MCU

section

RS-232

port

Joystick

3.3V voltage

regulator

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,

enhancements, improvements, and other changes to its products and services at any time and to discontinue

any product or service without notice. Customers should obtain the latest relevant information before placing

orders and should verify that such information is current and complete. All products are sold subject to TI’s terms

and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in

accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI

deems necessary to support this warranty. Except where mandated by government requirements, testing of all

parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for

their products and applications using TI components. To minimize the risks associated with customer products

and applications, customers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,

in which TI products or services are used. Information published by TI regarding third-party products or services

does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.

Use of such information may require a license from a third party under the patents or other intellectual property

of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is without

alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction

of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for

such altered documentation.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that

product or service voids all express and any implied warranties for the associated TI product or service and

is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Following are URLs where you can obtain information on other Texas Instruments products and application

solutions:

Products Applications

Amplifiers amplifier.ti.com Audio www.ti.com/audio

Data Converters dataconverter.ti.com Automotive www.ti.com/automotive

DSP dsp.ti.com Broadband www.ti.com/broadband

Interface interface.ti.com Digital Control www.ti.com/digitalcontrol

Logic logic.ti.com Military www.ti.com/military

Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork

Microcontrollers microcontroller.ti.com Security www.ti.com/security

Telephony www.ti.com/telephony

Video & Imaging www.ti.com/video

Wireless www.ti.com/wireless

Mailing Address: Texas Instruments

Post Office Box 655303 Dallas, Texas 75265

Andere Handbücher für Chipcon CC2400DBK

Andere Texas Instruments Hauptplatine Handbücher

Texas Instruments

Texas Instruments BQ27620 Bedienungsanleitung

Texas Instruments

Texas Instruments Dual-Slot ATCA AdvancedMC TPS2358 Bedienungsanleitung

Texas Instruments

Texas Instruments DRV5055-ANGLE-EVM Series Bedienungsanleitung

Texas Instruments

Texas Instruments TSW6011EVM Bedienungsanleitung

Texas Instruments

Texas Instruments TPS563300EVM-226 Bedienungsanleitung

Texas Instruments

Texas Instruments DS320PR810-RSC-EVM Bedienungsanleitung

Texas Instruments

Texas Instruments TPA3220EVM Bedienungsanleitung

Texas Instruments

Texas Instruments TPS650937 Bedienungsanleitung

Texas Instruments

Texas Instruments CC253x Bedienungsanleitung

Texas Instruments

Texas Instruments DLP LightCrafter Display 4710 EVM Bedienungsanleitung

Texas Instruments

Texas Instruments DRV8702-Q1 Bedienungsanleitung

Texas Instruments

Texas Instruments TAS2564YBGEVM-DC Bedienungsanleitung

Texas Instruments

Texas Instruments TPS23881EVM Bedienungsanleitung

Texas Instruments

Texas Instruments TPL7407L7 Bedienungsanleitung

Texas Instruments

Texas Instruments TPS54291 Bedienungsanleitung

Texas Instruments

Texas Instruments PCM1802EVM Bedienungsanleitung

Texas Instruments

Texas Instruments TMDSEVM6474LE Bedienungsanleitung

Texas Instruments

Texas Instruments DAC80502 Bedienungsanleitung

Texas Instruments

Texas Instruments LM5150RUMHDEVM Bedienungsanleitung

Texas Instruments

Texas Instruments LMP91051EVM Bedienungsanleitung

Texas Instruments

Texas Instruments bq27546EVM Bedienungsanleitung

Texas Instruments

Texas Instruments AMC1411 Bedienungsanleitung

Texas Instruments

Texas Instruments DRV824x-Q1EVM Bedienungsanleitung

Texas Instruments

Texas Instruments AFE4400 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung