Texlabel SP4 Bedienungsanleitung
User Guide
V. 20.0319
SP4
2
Summary
OVERVIEW ......................................................................................................................................................... 3
PRINTER INSTALLATION..................................................................................................................................... 5
DRIVER INSTALLATION FOR WINDOWS USERS ................................................................................................. 5
LOADING RIBBONS AND FOILS .......................................................................................................................... 6
USING THE SOFTWARE - GoLabel (only Windows)............................................................................................ 9
MAINTENANCE ................................................................................................................................................ 13
PARAMETERS FOR WHITE AND COLORED STICKERS....................................................................................... 14
PARAMETERS FOR TRANSPARENT STICKERS................................................................................................... 16
PARAMETERS FOR CARE LABELS ..................................................................................................................... 18
PRINCIPAL REQUIREMENTS FOR INTERNATIONAL CARE LABELS.................................................................... 23
3
OVERVIEW
Please keep the original packaging in case the printer must be returned.
Box Content:
SP4 Label Printer
DVD Including software and printer driver for Windows.
Empty cylinder core for rewinding the foil
Foil spindle –Set of 2
USB Cable.
AC Adapter
Power adapter
Printer View:
1. LED status indicator
2. Power /pause button
3. Tab for opening the upper printer cover
4. Ribbon exit
1. ON/OFF Power Switch
2. AC Power port
3. USB 2.0 port
4. USB port
5. Serial port
6. Ethernet port
4
1. Upper cover
2. Foil supply support
3. Foil supply wheel
4. Foil rewinder wheel
5. Foil rewinder support
6. Printhead unlock button
7. Fastening tabs
8. Ribbon supply support
9. Platen
10. Marker sensor
11. Spatial sensor
12. Cover for ribbon supply wheel
13. Ribbon guide regulator
14. Printhead
5
PRINTER INSTALLATION
1. Place printer onto flat and regular surface
2. Make sure ON/OFF switch is set to OFF
3. Connect printer to the computer with USB cable or Ethernet cable
4. Connect AC cable to the AC Power port on the back of the printer, and then connect the Power
Adapter to a grounded socket
5. Turn printer ON from the ON/OFF switch
6. Turn ON printer display from the Power button
DRIVER INSTALLATION FOR WINDOWS USERS
Option 1.
Connect to the following link for instructions on how to download the Windows driver for
the printer
www.texlabel.eu/wp/download-it
Option 2.
Turn on printer and wait for the writing “Ready” to appear on the display
Run DVD as an administrator and follow the printer setup wizard
Installing Software
Note! When the printer is connected with the USB cable, the driver installation will be automatically done.
1. Insert the DVD in the computer.
2. Choose "Software" on the Welcome screen.
3. Press the icon "install software" to start the installation.
6
LOADING RIBBONS AND FOILS
LOADING THE FOIL
Pull the cover release catches on both sides of the printer.
Insert the foil spindle into new foil.
Insert the foil spindle into empty cylinder core.
Insert the foil spindle with the new foil into the indicated space (1) as shown in the image below.
7
Insert the foil spindle with the empty cylinder core into the foil rewind wheel, as shown in the image below.
Attach foil extremity to the empty cylinder core with the adhesive strip at the end of the foil.
Wind the foil around the empty foil core for a few centimeters until you see the ink beginning strip.
WARNING: The foil has a matt side and a glossy side, make sure that the matt side is
the one in contact with the ribbon.
LOADING RIBBON
Load the ribbon onto the ribbon supply support. Use the ruler on the support to center the
position of the ribbon, in a way that it aligns with the ink foil to print.
8
Pass the ribbon through the ribbon guides, using the guide regulator wheel on the side. Regulate the width
based on the width of the ribbon.
Close the printhead and close the upper printer cover.
The printer is now ready to print! This procedure is the same for printing on label stickers. However, if the
label stickers come in a pack and not a roll, position the pack behind the printer and insert the stickers
through the back of the printer. Pass the stickers through the ribbon guides, under the sensor (adjust width
to fit stickers) and through the printhead just like instructions above for ribbons.
9
USING THE SOFTWARE - GoLabel (only Windows)
Click the "New" button
Click "Media Type" and set the type of label.
Click "Media Size" and set the size of label, click "Ok".
10
To insert Shape, Bar code, Text and Graphics use the left Side menu bar
Click "Printer Setup" to select the printer, number of copies and launch command print.
Inhaltsverzeichnis
Andere Texlabel Drucker Handbücher
