The Singing Machine SMVG-600 Bedienungsanleitung

SMVG-600

COMPACT DISC + GRAPHICS

WITH BUILT-IN TV KARAOKE CENTER

OWNER’S MANUAL

Please read before using this unit.

The Singing Machine is a registered trademark of The Singing Machine Co., Inc.

WARNINGS

WARNING:TO REDUCE THE RISK OF

FIRE OR SHOCK HAZARD, DO NOT EXPOSE

THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION: TO PREVENT THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE COVER

OR BACK. NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED

PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol is intended to alert you

to the presence of uninsulated

dangerous voltage within the

product's enclosure that might be of

sufficient magnitude to constitute a

risk of electric shock. Do not open

the product's case.

This symbol is intended to inform

you that important operating and

maintenance instructions are

included in the literature

accompanying this product.

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT,

FULLY INSERT.

DRIPPING WARNING

The product shall not be exposed to dripping

or splashing and that no objects filled with

liquids, such as vases, shall be placed on the

product.

VENTILATION WARNING

The normal ventilation of the product shall not

be impeded for intended use.

This CD player is made and tested to meet

exacting safety standards. It meets FCC

requirements and complies with safety

performance standards of the U.S.

Department of Health and Human Services.

Warnings:

!This CD player employs a laser light beam.

Only a qualified service person should

remove the cover or attempt to service this

device, due to possible eye injury.

!The use of controls, adjustments, or

procedures other than those specified

herein might result in hazardous radiation

exposure.

CAUTION

This compact disc player is classified as a

CLASS 1 LASER product.

The CLASS 1 LASER PRODUCT label is

located on the rear panel.

CAUTION!

Invisible laser radiation when open and inter

locks defeated. Avoid exposure to beam.

CLASS 1

LASER PRODUCT

IMPORTANT SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions should be read before

the product is operated.

2. Retain Instructions - The safety and operating instructions should be retained for

future reference.

3. Heed Warnings - All warnings on the product and in the operating instructions should

be adhered to.

4. Follow instructions - All operating and use instructions should be followed.

5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning the exterior only. Do NOT

attempt to clean the inside.

6. Attachments- Do not use attachments not recommended by the product manufacturer as

they may cause hazards.

7. Water and Moisture - Do not use this product near water - for example, near a bath tub,

wash bowl, kitchen sink, or laundry tub; in a wet basement, or near a swimming pool,

and the like.

8. Accessories - Do not place this product on an unstable cart, stand tripod, bracket, or

table. The product may fall, causing serious injury to a child or adult, and serious

damage to the product. Use only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer, or sold with the product. Any mounting of the

product should follow the manufacturer's instructions, and should use a mounting

accessory recommended by the manufacturer.

9. A product and cart combination should be moved with care. Quick stops, excessive force,

and uneven surfaces may cause the appliance and cart combination to overturn.

10. Ventilation - Slots and openings in the cabinet are provided for ventilation and to

ensure reliable operation of the product and to protect it from overheating, and these

openings must not be blocked or covered. The openings should never be blocked by

placing the product on a bed, sofa, rug, or other similar surface. This product should

not be placed in a built-in installation such as a bookcase or rack unless proper ventilation

is provided.

11. Power Sources - This product should be operated only from the type of power source

indicated on the marking label. If you are not sure of the type of power supply to

your home, consult your product dealer or local power company. For products intended to

operate from battery power, or other sources, refer to the operating instruction.

IMPORTANT SAFETY INSTRUCTIONS

12. Grounding or Polarization - This product may be equipped with a polarized

alternating current line plug (a plug having one blade wider than the other). This

plug will fit into the power outlet only one way. This is a safety feature. If you are unable to

insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit,

contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose

of the polarized plug.

Alternate Warnings - This product may be equipped with a three-wire grounding-type

plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type

power outlet. This is a safety feature. If you are unable to insert the plug into the outlet,

contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose

of the grounding-type plug.

13. Power-Cord Protection - Power supply cords should be routed so that they are

not likely to be walked on or pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience receptacles, and the point where they

exit from the product.

14. Protective Attachment Plug - The product is equipped with an attachment plug

having overload protection. This is a safety feature. See Instruction Manual for

replacement or resetting of protective device. If replacement of the plug is required,

be sure the service technician has used a replacement plug specified by the

manufacturer that has the same overload protection as the original plug.

15. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver,

be sure the antenna system is grounded so as to provide some protection against

voltage surges and built-up static charges. Article 810 of the National Electrical Code,

ANSI/NFPA 70, provides information with regard to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of

grounding conductors, location of antenna-discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode. See figure:

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

GROUND

CLAMP

ELECTRIC

SERVICE

EQUIPMENT

NEC-NATIONAL ELECTRICAL CODE

S2898A

IMPORTANT SAFETY INSTRUCTIONS

16. Lightning - For added protection for this product during a lightning storm, or when it is left

unattended and unused for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent damage to the product due to

lightning and power-line surges.

17. Power Lines - An outside antenna system should not be located in the vicinity of

overhead power lines or other electric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside antenna system, extreme

care should be taken to keep from touching such power lines or circuits as contact

with them might be fatal.

18. Overloading - Do not overload wall outlets, extension cords, or integral

convenience receptacles as this can result in a risk of fire or electric shock.

19. Object and Liquid Entry - Never push objects of any kind into this product through

openings as they may touch dangerous voltage points or short-out parts that could result

in a fire or electric shock. Never spill liquid of any kind on the product.

20. Servicing - Do not attempt to service this product yourself as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all servicing

to qualified service personnel.

21. Damage Requiring Service - Unplug this product from the wall outlet and refer

servicing to qualified service personnel under the following conditions:

a) When the power-supply cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the product,

c) If the product has been exposed to rain or water,

d) If the product does not operate normally by following the operating instructions. Adjust

only those controls that are covered by the operating instructions as an improper

adjustment of other controls may result in damage and will often require extensive

work by a qualified technician to restore the product to its normal operation.

e) If the product has been dropped or damaged in any way, and

f ) When the product exhibits a distinct change in performance - this indicates a need for

service.

22. Replacement Parts - When replacement parts are required, be sure the service

technician has used replacement parts specified by the manufacturer or have the

same characteristics as the original part. Unauthorized substitutions may result in

fire, electric shock, or other hazards.

23. Safety Check - Upon completion of any service or repairs to this product, ask the

service technician to perform safety checks to determine that the product is in proper

operating condition.

24. Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as

recommended by the manufacturer.

25. Heat - The product should be situated away from heat sources such as radiators,

heat registers, stoves, or other products (including amplifiers) that produce heat.

26. Nonuse Periods - Unplug the product’s power cord when you will not use it for an

extended period.

THE SINGING MACHINE KARAOKE GLOSSARY OF TERMS

In addition to all of the terminology associated with consumer electronics products, a few

additional terms are used almost exclusively in karaoke. These terms are meant to familiarize

you with the world of Karaoke. The features listed below may not necessarily pertain to the

particular model Singing Machine that you have. The following are some brief explanations of

karaoke terms:

Echo:

Echo adds depth and resonance to a singer's voice without affecting the music. This echo is

produced by creating minor controlled feedback in the singer's voice.

Multiplex:

Our multiplex recordings contain 2 copies of the same song. One version is a stereo recording of

the song without the lead singer. The second version is recorded with the music and

background vocals on the left channel and the lead singer recorded on the right channel. This

‘split track’ recording allows you to control the volume of the lead singer by adjusting the balance

control. You can sing a duet with the lead singer or use the lead singer as a guide as you learn

the song, gradually fading them out with the balance control until you are able to sing the song

on your own.

Auto Voice Control (AVC):

When the AVC function is activated, the vocals on a multiplex recording are eliminated as soon

as the singer begins singing into the microphone. When the singer stops singing, the vocals on

the multiplex recording are automatically re-activated. This useful function is used primarily

during practice sessions while a singer is learning a song. Please note that the AVC function

only works with multiplex recording and not with standard audio recordings.

Pitch Control:

This function controls pitch of music by controlling the speed at which a cassette tape plays

back. By increasing the speed of the tape, the music sounds higher (sharp). By slowing the tape

speed, the music sounds lower (flat).

Key Controller:

Key Controller changes the key of the CD/CDG music (+ or - steps) to adjust to the singer’s

voice.

CDG:

This is an acronym for Compact Disc plus Graphics. You will also see variations CD+G, and

CD+Graphics. This is a regular audio CD with information stored on a data track simultaneous

to music. In laymen's terms, CDG has a video output for simple graphics (not full motion video).

In the case of karaoke, the graphics function is used to store song lyrics, and display the lyrics in

synch with music. In most cases, CDG software displays lyrics which change color as they are

to be sung. A regular television is all that is required to display CDG lyrics.

NOTE - CDG is a particular type of compact disc encoding system that is different from VCD or

DVD. Your Singing Machine can decode standard audio compact discs and CDG discs. It will

not read VCD or DVD encoded discs.

Standard audio discs and cassette tapes will not display lyrics on your TV. Audio CDs do not

contain the software necessary to display lyrics.

INTRODUCTION

YourSMVG-600 Compact Disc +Graphics with will provideyou withmany years

of fun and entertainment. It can let you be the “star” as you sing along with your favorite

recordings and hear your voice with the music through the system’s speakers.

This Karaoke Center is easy to use, yet full of features with a compact design. After just a few

simple instructions, you will become an expert. Before you use your SMVG-600, please glance

through this manual to familiarize yourself with all the features available and the sections of the

manual that describe their operation. Next, go to the section for the specific operation you wish

to perform.

For your easy reference, listed here are some of the main features of this Karaoke Center:

Lyrics on TV screen - displays the lyrics with the tempo of music when playing CD+G discs.

Auto Voice Control - lets you replace the original singer's voice with your own voice when any

prerecorded, multiplex karaoke disc or tape is played. To activate, just rotate Mic Volume to a

comfortable listening level, and Auto Voice Control for the best balance between playback and

microphone levels.

Balance Control - lets you adjust the balance between the prerecorded original singer's voice

and the music if you use a multiplex karaoke disc.

Echo Control - lets you add an echo to enrich your voice for a concert hall effect.

Master Volume Control - lets you turn the volume control clockwise or counter-clockwise until

desired volume level is obtained.

- lift up camera lens to display your image on The Singing Machine’s monitor.

Built-In Speaker - lets you share the music with your family or friends.

Auxiliary Output Jacks - lets you connect another audio output component, such as an

equalizer/booster or a PAsystem.

CONTROL LOCATIONS

FRONT VIEW

1. CAMERA Lens 14. PROGRAM Button

2. VIDEO OUT Selector 15. REPEAT Button

(CAMERA/CDG/AUX) 16. INTRO Button

3. CD Tray 17. ECHO Control

4. MONITOR 18. CD Tray OPEN/CLOSE Button

5. A.V.C. Control (Auto Voice Control) 19. Loudspeaker

6. MASTER Volume Control 20. PLAY/PAUSE Button

7. BALANCE Control 21. STOP Button

8. MIC Volume Control 22. PROGRAM Indicator

9. MONITOR Selector 23. REPEAT Indicator

(CAMERA/CDG/AUX/OFF) 24. SKIP Buttons

10. POWER Button 25. LED Display

11. POWER On Indicator 26. CDG Indicator

12. AUDIO Selector (CDG/AUX) 27. PLAY/PAUSE Indicator

13. Loudspeaker

1 2 3 4 5 6 7 8

272625242322

CONTROL LOCATIONS

REAR VIEW

30. BRIGHTNESS Control 35. VERTICAL HOLD Control

31. CONTRAST Control 36. AUX IN Jack (L)

32. VIDEO IN Jack 37. DC Jack (DC 16V)

33. VIDEO OUT Jack 38. AUX OUT Jack (R)

34. AUX OUT Jack (L) 39. AUX IN Jack (R)

SIDE VIEW

28. MIC 1 Jack

29. MIC 2 Jack

38 39

CONNECTING POWER

You can power the system from a standardAC outlet by using the supplied AC-DC adapter.

CAUTION: The adapter must be connected to the power voltage which is the same as the local

area. If not, there is a danger of BURNING the unit that causes a fire.

For UK only

CAUTION: The adapter is designed to operate from a main supply of 230V AC~50Hz. The unit

is fitted with a 13amp (BS 1363) main plug. Should the fuse in the main plug require replacing a

(BS 1363) fuse must be fitted. Ensure the voltage of your electrical power supply

matches those indicated on the rating label located on the top of the adapter.

If the socket outlets in your home are not suitable for the plug supplied with the unit, the plug

should be removed and an appropriate one fitted.

CONNECTING TO YOUR TV

The Singing Machine provides a patch cord to give you the option of connecting your

SMVG-600 to an external audio/sound system and video device. The patch cord has three RCA

jacks at each end. White and Red are for left and right audio connections and the Yellow is for

connecting the video.

Make sure that you have a CDG disc in the Singing Machine and playing when you are making

this connection. You will know you have the proper settings on your TV or VCR as soon as you

see the Singing Machine logo or lyrics on the screen!

3amp

MAKING THE CONNECTIONS

Adapter

DC 16V

Inhaltsverzeichnis

Andere The Singing Machine Karaoke-System Handbücher

The Singing Machine

The Singing Machine SMC2040 Bedienungsanleitung

The Singing Machine

The Singing Machine SMM-117 Bedienungsanleitung

The Singing Machine

The Singing Machine STVG885BK Bedienungsanleitung

The Singing Machine

The Singing Machine Fiesta Go Bedienungsanleitung

The Singing Machine

The Singing Machine STVG-513 Bedienungsanleitung

The Singing Machine

The Singing Machine SML329 BK Bedienungsanleitung

The Singing Machine

The Singing Machine Fiesta Go Bedienungsanleitung

The Singing Machine

The Singing Machine SMC2035 Bedienungsanleitung

The Singing Machine

The Singing Machine SMG-903 Bedienungsanleitung

The Singing Machine

The Singing Machine FIESTA Bedienungsanleitung

The Singing Machine

The Singing Machine SML645BT Bedienungsanleitung

The Singing Machine

The Singing Machine STVG-718 Bedienungsanleitung

The Singing Machine

The Singing Machine SML2200 Bedienungsanleitung

The Singing Machine

The Singing Machine SMG303 Bedienungsanleitung

The Singing Machine

The Singing Machine SMC2068 Bedienungsanleitung

The Singing Machine

The Singing Machine SML625BTBK Bedienungsanleitung

The Singing Machine

The Singing Machine SML652BK Bedienungsanleitung

The Singing Machine

The Singing Machine Pedestal CDG Karaoke System iSM-1010 Bedienungsanleitung

The Singing Machine

The Singing Machine SDL9030DB Bedienungsanleitung

The Singing Machine

The Singing Machine SML605W Bedienungsanleitung

The Singing Machine

The Singing Machine SML283 Bedienungsanleitung

The Singing Machine

The Singing Machine SML682BTW Bedienungsanleitung

The Singing Machine

The Singing Machine SMC3093SP Bedienungsanleitung

The Singing Machine

The Singing Machine STVG-718 Bedienungsanleitung

Beliebte Karaoke-System Handbücher anderer Marken

Memorex

Memorex MKS2430 Bedienungsanleitung

Tosing

Tosing 008 Bedienungsanleitung

Karma

Karma KSTATION Bedienungsanleitung

LG HT902TR-XK Bedienungsanleitung

Karaoke Warehouse

Karaoke Warehouse Player 2000 Bedienungsanleitung

VocoPro

VocoPro DVG-888K II Bedienungsanleitung

ION

ION DISCOVER KEYBOARD USB Bedienungsanleitung

Singsation

Singsation CENTER STAGE FREESTYLE Bedienungsanleitung

RSQ

RSQ NEO K-2 Bedienungsanleitung

VocoPro

VocoPro BRIDGE Bedienungsanleitung

MASINGO

MASINGO Illuminato Q4 Bedienungsanleitung

auna

auna DisGo Bedienungsanleitung

auna

auna Karaoke Star 2 Bedienungsanleitung

DAPAudio

DAPAudio DVMP-150 Bedienungsanleitung

CAVS

CAVS DK3 Bedienungsanleitung

WOW! Videoke Premium

WOW! Videoke Premium WOW Mabuhay Plus 2 Bedienungsanleitung

GRAND VIDEOKE

GRAND VIDEOKE TKR-373MU Bedienungsanleitung

Disney

Disney FROZEN 2 Bedienungsanleitung