Theben ThePiccola P360-100 DE Bedienungsanleitung

thePiccola P360-100 DE WH

2090200

307146 02

Presence detector

1. Basic safety information 3

2. Proper use 3

Disposal 3

3. Device description 4

4. Installation and connection4

Installing the presence

detector 4

Connecting the presence

detector 6

Individual switching 7

Parallel switching 7

Push button control 8

Installation instructions and

detection area 8

5. Walking test 9

6. Setting 9

Setting the brightness

switching value (LUX) 10

Setting the time delay (TIME) 12

7. Settings with remote

control 12

Settings by using theSenda S 13

Settings by using theSenda P 13

Settings with Sendo Pro

868-A 15

8. Technical data 15

9. Contact 16

1. Basic safety information

Danger of death through electric shock or fire!

 Installation should only be carried out by a

qualied electrician!

WARNING

•The device conforms with EN 60669-2-1 if correctly

installed

2. Proper use

•Presence detector for automatic lighting control depen-

dent on presence and brightness

•Suitable for ceiling installation (false ceilings)

•Suitable for small rooms, corridors, toilets, etc.

Disposal

Dispose of the device in an environmentally sound manner

(electronic waste)

3. Device description

Sensor unit

red LED

Power supply unit

2 potentiometers for setting

the time delay (TIME) and

the brightness switching

value (LUX)

4. Installation and connection

Installing the presence detector

LInstallation height: 2–4 m

LCable length: 45 cm

LPresence detector requires clear line of sight to people

Disconnect power source

Create a ceiling opening of Ø 34–36 mm

Connect power supply unit according to the

wiring diagram

Make settings at the potentiometers

Push the power supply unit through the ceiling opening

and attach the sensor with tensioned springs in the ceiling

Ø 34-36 mm

6–8 mm

max. 1 x 2,5 mm2

Connecting the presence detector

Danger of death through electric shock or fire!

 Installation should only be carried out by a

qualied electrician!

WARNING

Disconnect power source

Ensure device cannot be switched on

Check absence of voltage

Earth and bypass

Cover or shield any adjacent live components

The warm-up phase takes approx. 1 min. The LED is perma-

nently red.

Individual switching

In individual switching, the presence detector as master

detects presence and brightness and controls lighting.

L’

Parallel switching

If the detection area covered by a single presence detector

is insufcient (in larger rooms), then the switch contacts of

several detectors can be directly connected with each other.

Set brightness switching value and time delay on all detec-

tors identically.

L’ L’

Push button control

The lighting can be manually switched on/off via a button. If

the light is switched on manually, it will remain on as long as

people are present (plus time delay). Then the light goes into

the set automatic mode. If the light is switched off manually,

it will remain off as long as people are present (plus time

delay). Then the light goes back to automatic mode.

Installation instructions and detection

area

As the detector reacts to variations in temperature, avoid the

following situations:

Do not point the presence detector at objects with highly-

reective surfaces such as mirrors, etc.

Do not install the presence detector near heat sources such

as heating vents, air conditioners, lamps, etc.

Do not point the presence detector at objects that move in

the wind such as curtains, large plants, etc.

Pay attention to the direction of motion during the test run.

2,5 m

360°

Ø 2 m

Ø 8 m

Lrecommended installation height: 2 – 4 m

LTransverse detection area: 8 m (transversal to the detector)

LFrontal detection area: 2 m (directly approaching the detector)

LDetection angle: 360°

5. Walking test

The walking test is used to test the detection area.

Set the time delay potentiometer (TIME) to T(Test). The

presence detector only reacts to movements, brightness

measurement is switched off.

Walk through the detection area. Every detected movement

is indicated by the LED, and the light switch contact closes.

When no one is present the light switch contact opens after

3 seconds.

3 sec

6. Setting

The presence detector has 2 potentiometers for setting time

delay (TIME) and brightness switching value (LUX).

Setting the brightness switching value

(LUX)

You can set different brightness values with the potentiome-

ter for the brightness switching value (LUX).

If you want to change the preset brightness

Set the potentiometer to the desired brightness (5 – 1000

lux = ).

Andere Handbücher für thePiccola P360-100 DE

Inhaltsverzeichnis

Andere Theben Sicherheitssensor Handbücher

Theben

Theben theLeda D S AL Bedienungsanleitung

Theben

Theben theLuxa S150 WH Bedienungsanleitung

Theben

Theben theMura S180-100 UP WH Bedienungsanleitung

Theben

Theben thePassa P360-101 UP WH Bedienungsanleitung

Theben

Theben 2080026 Bedienungsanleitung

Theben

Theben thePassa P360-221 DALI UP WH Bedienungsanleitung

Theben

Theben SPHINX 104-360/2 DIMplus Bedienungsanleitung

Theben

Theben LUXA 103-100 DE WH Bedienungsanleitung

Theben

Theben thePrema S360-101 E UP WH Bedienungsanleitung

Theben

Theben theRonda P360-110 DALI UP WH Bedienungsanleitung

Theben

Theben thePrema S360 DALI UP WH Bedienungsanleitung

Theben

Theben TIMEGUARD LEDPROPCB Handbuch

Theben

Theben theRonda P360-100 WH GST Bedienungsanleitung

Theben

Theben thePixa P360 KNX UP WH Bedienungsanleitung

Theben

Theben 201 0 090 Bedienungsanleitung

Theben

Theben theRonda S360 KNX UP WH Bedienungsanleitung

Theben

Theben 201 9 290 Bedienungsanleitung

Theben

Theben ECO-IR DUAL-C NT Bedienungsanleitung

Theben

Theben thePrema P360-101 E UP WH Bedienungsanleitung

Theben

Theben thePixa P360 KNX UP WH Bedienungsanleitung

Theben

Theben TA 4 S DALI-2 Bedienungsanleitung

Theben

Theben Luxa 103-200 Bedienungsanleitung

Theben

Theben TIMEGUARD PDSM362AB Handbuch

Theben

Theben compact office 24V Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

DBI SALA

DBI SALA EZ Stop Bedienerhandbuch

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung

Theben thePiccola P360-100 DE Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken