Theben TheLeda E30 WH Bedienungsanleitung

theLeda E30 WH 1020915

theLeda E30 BK 1020916

307061 02

LED spotlight with

motion detector

1. Basic safety information

Danger of death through electric shock or fire!

 Installation should only be carried out by a

qualied electrician!

WARNING

•The LED spotlight with motion detector (PIR) conforms to

EN 60598-1 if correctly installed

•Only intended for installation outside of arm's reach

Proper use

•LED spotlight is used for lighting, depending on presence

and brightness

•Intended for wall mounting outdoors

•Suitable for corridors, gardens, entrances, parks etc.

•For use in normal ambient conditions

Disposal

Dispose of LED spotlight in an environmentally sound manner

(electronic waste)

2. Description

Sensor head with

2 potentiometers for set-

ting time (min.) and

brightness (lux)

LED spotlight

3. Connection

WARNING

Danger of death through electric shock!

Disconnect power source

Ensure device cannot be switched on

Check absence of voltage

Earth and bypass

Cover or shield any adjacent live components

L

Do not touch the metal parts. The device can get hot.

4. Installation

Ensure installation height of 2.5 m

Use the accompanying mounting bar for exible installation

and cable entry

230V

Disconnect power source 

Ø 6 mm

Make marks for the holes and drill the holes

Tighten the mounting bar 



Feed cable through the seal of the base 



Fix cord grip and tighten screws 



Connect the individual wires to the appropriate terminal 



external

conductor

switched

conductor

brown

blue

green/yellow

brown

blue

green/yellow

neutral

conductor

mains

earth

neutral

conductor

mains

earth

Tighten screws 



click

Push



Place and engage the cover on the LED spotlight

Place the LED spotlight on the mounting bar and tighten

screws

Connect LED spotlight to mains

Installation instructions

As the LED spotlight reacts to variations in temperature, avoid

the following situations:

•Do not direct motion detectors (PIR) of the LED spotlight

at objects with highly-reective surfaces, such as mirrors

etc.

•Do not install the motion detector near heat sources,

such as heating outlets, air conditioning systems, lamps

etc.

•Do not direct the motion detector at objects that move in

the wind, such as curtains, large plants etc.

•Pay attention to the direction of motion during the test

run.

OT8.1 TEM

5ER

12 METER

3 METER

1 RETEM5.2OT8.

12 METER

3 METER

2OT8.1 RE

TEM

12 METER

3 METER

4 m

12 m

180°

3 m

•Transverse detection area: 12 m (transversal to the

detector)

•Frontal detection area: 4 m (directly approaching the

detector)

•Detection angle: 180 °

5. Walking test

The walking test is used to test the detection area and to

restrict it if necessary.

Turn the time potentiometer (min.) counterclockwise up to

the stop.

The motion detector now only reacts to movements (indepen-

dent of brightness).

Go diagonally to the detection area. After the motion detec-

tor has detected a movement, it switches on for 2 s.

Pay attention to the direction of motion during the test.

Sec

2 sec

Dusk Time

Test mode

6. Alignment

•The sensor can be rotated to left/right and down by

90 °.

•The LED spotlight can be rotated up by 45 ° and down by

60 °.

90º

60º

45º

Limiting the detection area - using stickers

Use the supplied stickers to adjust the motion detector to

the desired detection area.

Remove the required section of the sticker by using

scissors.

Then place on the lens.

Lens masking

7. Setting

The LED spotlight has 2 potentiometers for setting the time

(min.) and brightness (lux).

10min5sec

Min

sec

Turn On time adjustment

Environment lux level to turn On

Adjustments

Dusk/Dawn Time

Test mode

Setting the brightness (lux)

Turn the potentiometer to „Moon“; the LED spotlight only

switches on when it is relatively dark.

Turn the potentiometer to „Sun“; the LED spotlight switches

on when it is relatively bright.

Turn the potentiometer to „Sun“, and the device works

independent of brightness.

Setting the time (min.)

Set the potentiometer to the desired time (5 s - 10 min.).

Manual operation

The lighting can be manually switched on/off via a circuit

breaker button.

LThe surrounding brightness must be below the set value!

LA circuit breaker button must be connected.

L

Shortly press the circuit breaker button (max. 1.5 seconds)

▻The lighting remains switched on, until the surrounding

brightness exceeds the set value.

In order to switch off the lighting, shortly press the circuit

breaker button (max. 1.5 seconds).

Setting the twilight switch function

Turn the time potentiometer (min.) clockwise up to the stop.

▻The twilight switch function is activated.

LNow, the motion detector does not respond to movements

anymore.

LThe connected spotlight switches on at the set surround-

ing brightness

!CAUTION!

8. Technical data

•Operating voltage: 230 V AC +/–10 %, 50–60 Hz

•Consumption with light ON: 30 W

•Standby output: max. 0.5 W

•LED output (luminous ux):

– theLeda E30 WH: 30 W (2310 lm)

– theLeda E30 BK: 30 W (2115 lm)

•Protection rating: IP 55 in accordance with

EN 60598-1

•Protection class: I in accordance with

EN 60598-1

•Operating temperature: –20 °C … +40 °C

•Brightness setting range: 2 – 200 lx

•Duty cycle range: 5 s – 10 min.

•Detection area: transverse: max. 12 m,

frontal: max. 4 m; 180 °

•Installation height: 2.5 m

•Sensor head can be

rotated right/left, down

by: 90 °, 90 °

•Spotlight can be rotated

up by: 45 ° and down by: 60 °

•Energy efciency class: A+ (theLeda BK: A)

•Switching contact: μ-contact

•Max. switching capacity: 1000 W; 4.3 A (at cos ϕ= 1)

•Min. switching capacity: 10 mA/230 V

•Incandescent and halogen

lamp load: 1000 W

•Fluorescent lamps (LLB low-loss ballasts):

uncompensated/series

compensated: 1000 VA,

parallel compensated: 350 W

(37 µF)

•Fluorescent lamps (EB – electronic ballasts):

300 W

•Compact uorescent lamps (EB): 80 W

•LED lamps < 2 W: 15 W

•LED lamps > 2 – 8 W: 50 W

•LED lamps > 8 W: 50 W

9. Contact

Theben AG

Hohenbergstraße 32

72401 Haigerloch

GERMANY

Phone: +49 7474 692-0

Fax: +49 7474 692-150

Hotline

Phone: +49 7474 692-369

[email protected]

www.theben.de

Andere Handbücher für theLeda E30 WH

Dieses Handbuch passt für folgende Modelle

Andere Theben Scheinwerfer Handbücher

Theben

Theben theLeda E10L WH Bedienungsanleitung

Theben

Theben theLeda S10 WH Bedienungsanleitung

Theben

Theben theLeda S10 WH Bedienungsanleitung

Theben

Theben theLeda E10L WH Bedienungsanleitung

Theben

Theben theLeda P12 WH Bedienungsanleitung

Theben

Theben theLeda E30 WH Bedienungsanleitung

Theben

Theben LU 102 HF Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

Guangzhou Yinhe Lighting&Sound Equipment Factory

Guangzhou Yinhe Lighting&Sound Equipment Factory NE-204 Bedienungsanleitung

LIVARNO home

LIVARNO home 375304 2101 Originalbetriebsanleitung

Cameo

Cameo CLQS40WW Bedienungsanleitung

Leviton

Leviton Ellipsoid 5/50 Bedienungsanleitung

Monacor

Monacor img Stage Line PARL-56PDX/CR Bedienungsanleitung

Vector

Vector SL3AKV Bedienungsanleitung

Quantum

Quantum Q262 Betriebshandbuch

Philips

Philips Vari-lite VL3015LT Bedienungsanleitung

EUROSPOT

EUROSPOT C51 Bedienungsanleitung

DTS

DTS MINI BRICK ARC Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation VISIBEAM II Handbuch

ACME

ACME LED-MS350B Bedienungsanleitung

EuroLite

EuroLite Akku flat light 1 Bedienungsanleitung

Commercial Electric

Commercial Electric SPTM-1401 Bedienungsanleitung

Vision & Control

Vision & Control SLB-500-W5K7-P-SL Bedienungsanleitung

Teknik

Teknik FLEXI Bedienungsanleitung

Craftsman

Craftsman CMXLSB10 Bedienungsanleitung

EuroLite

EuroLite LED SLS-144 UV Floor Spot Bedienungsanleitung