Themis RES-XR4-1U Bedienungsanleitung

User Manual

Installation

Manual

Installation

Manual

1RU 19” Rack-Mount Rugged Enterprise Server

Supporting X9DRW, X9DBU and X9SCi Motherboards

RES-XR4-1U

Ve rs i o n 1.5

Pa r t N u m b e r : 119708 - 024

Supporting X9DRW, X9DBU and X9SCi Motherboards

RES-XR4-1U

Supporting X9DRW, X9DBU and X9SCi Motherboards

RES-XR4-1U

Supporting X9DRW, X9DBU and X9SCi Motherboards

RES-XR4-1U

Supporting X9DRW, X9DBU and X9SCi Motherboards

RES-XR4-1U

Supporting X9DRW, X9DBU and X9SCi Motherboards

RES-XR4-1U

Supporting X9DRW, X9DBU and X9SCi Motherboards

RES-XR4-1U

Supporting X9DRW, X9DBU and X9SCi Motherboards

RES-XR4-1U

Supporting X9DRW, X9DBU and X9SCi Motherboards

RES-XR4-1U

version

1.5

version

1.5

version

1.5

version

1.5

version

1.5

version

1.5

version

1.5

version

1.5

Themis Computer—Rest of World

5 Rue Irene Joliot-Curie

38320 Eybens, France

Phone +33 476 14 77 80

Fax +33 476 14 77 89

Themis Computer—Americas and Pacific Rim

47200 Bayside Parkway

Fremont, CA 94538

Phone (510) 252-0870

Fax (510) 490-5529

World Wide Web http://www.themis.com

RES-XR4-1UInstallationManual*

Version 1.5—June2014

* Supports SuperMicro X9DRW, X9DBU, and X9SCi Motherboards.

photocopy, microfilm, retrieval system, or by any other means now known or hereafter invented without

the prior written permission of Themis Computer.

The information in this publication has been carefully checked and is believed to be accurate. However,

Themis Computer assumes no responsibility for inaccuracies. Themis Computer retains the right to

make changes to this publication at any time without prior notice. Themis Computer does not assume

any liability arising from the application or use of this publication or the product(s) described herein.

RESTRICTED RIGHTS LEGEND: Use, duplication, or disclosure by the United States Government

is subject to the restrictions set forth in DFARS 252.227-7013 (c)(1)(ii) and FAR 52.227-19.

TRADEMARKS and SERVICEMARKS

Themis®is a registered trademark of Themis Computer, Inc.

Intel® and Xeon®are registered trademarks of Intel Corporation.

Red Hat®is a registered trademark of Red Hat, Inc.

Linux®is a registered trademark of Linus Torvalds.

SuperMicro®and SuperDoctor™ are registered trademarks of Super Micro Computer, Inc.

All other trademarks, servicemarks, or registered trademarks used in this publication are the property of

their respective owners.

CE Marking

This product complies with the European EMC Directive (2004/108/EC) and the European Low Voltage

Safety Directive (2006/95/EC)/.

Safety Precautions

Instructions regarding safety precautions during installation, operation, or maintenance of the equipment

are given in the section entitled “Safety Instructions” on page v.

WARNINGS and CAUTIONS

The definitions of WARNINGS and CAUTIONS as used in this document are given in the Preface in

the section entitled “Notes, Cautions, Warnings, and Sidebars”.

RES-XR4-1U Installation Manual, Version 1.5

June 2014

Part Number: 119708-024

Themis Customer Support

North America, South America, and Pacific Rim

Telephone: 510-252-0870

Fax: 510-490-5529

E-mail: support@themis.com

Web Site: http://www.themis.com

iii

Themis Computer

RES-XR4-1U Installation Manual

VersionRevisionHistory

Version 1.5 ....................................................................................... June 2014

• Added German translation to the safety section of this manual

• minor edits and changes throughout this manual

Version 1.4 .................................................................................. January 2014

• Updated the Safety section of the manual

• Updated shock specification to 30 g

• Corrected improper roman numeral page numbering

• Updated all Xeon™ specs to reflect the V2 series (where applicable)

• Updated specs in table 1-1

• Corrected information in table 1-2

• Corrected the front panel LED colors in figure 1-4

• Corrected the icon for the “off state” in table 1-4

• Corrected table 1-5 to properly correlate I/O to correct motherboard

• Corrected all references to 38-mm fans (proper size is 40-mm)

• Added complete BMC section detailing both Renesas and WPCM450R

• Updated table 1-6 to include missing specifications

• Updated electrical table 1-7

• Updated table 1-8 to include more RES-XR4 systems

• Updated table 2-1 to reflect new memory specifications for X9DRW

• Added notes throughout the manual regarding proper battery disposal

• Updated figure 2-16 to include drive/drive tray installation procedure

• Added section in Chapter 3 for BIOS Error Beep Codes

• Added section in Chapter 3 for BIOS Recovery

• Added section for UID in Appendix A

• Added torque spec (20-inch lbs) for the rack slides in Appendix B

• minor edits and updates throughout this manual

iv Themis Computer

RES-XR4-1U Installation Manual Version 1.5

Version 1.3.................................................................................. October 2013

• Added Power Supply Monitoring section in Chapter 1.

Version 1.2.................................................................................. October 2013

• Updated Specs and DC power supply information, and added version 2 CPU

information.

Version 1.1....................................................................................August 2013

• Added all available and planned motherboard configurations as of this date.

Version 1.0.....................................................................................March 2013

• Initial Release

Themis Computer

RES-XR4-1U Installation Manual

Safety Instructions

To maximize user safety and ensure correct device operation, all instructions con-

tained in this section should be read carefully.

WARNING: All equipment connected to the product must conform to their standards

WARNING: This Themis PRODUCT must be used in sheltered environments only, and

at an altitude of less than 3048 meters (10,000 ft).

• The device must be used in accordance with the instructions for use.

• Electrical installations in the room must correspond to the requirements of

respective regulations.

• Take care that there are no cables, particularly mains cables, in areas where

persons can trip over them.

• Do not use a mains connection in sockets shared by a number of other power

consumers. Do not use an extension cable.

• Only use the mains cable supplied.

• Power cord requirements:

Europe: A power supply unit operating at a nominal voltage of 240V must use

a power cord rated for a minimum operating voltage of 200V and is not to be

used with an operational voltage below 200V

USA: A power supply unit operating at a nominal voltage of 120V must use a

power cord rated for a minimum operating voltage of 100V and is not to be

used with an operational voltage below 100V

Caution: It is important that the user observe all warnings and instructions

that are on the device and contained in this manual.

Caution: The protection of the building serves as protection for the equip-

ment.

Caution: When rack mounted, never lean on the server. It is prohibited to lean

on the server while it is pulled on slide rails (telescopic rails) outside of the

rack (bay). Personal injury and equipment damage can occur.

vi Themis Computer

RES-XR4-1U Installation Manual Version 1.5

• The AC input rating for the 750W (max) power supply units are as follows:

100-240 VAC, 12-6A, 47/63 Hz.

• The unit is completely disconnected from the power source only when all

power cords are disconnected from the power source. Therefore the power

cord(s) and its connectors must always remain easily accessible.

• Do not set up the device in the proximity of heat sources or in a damp location.

Make sure the device has adequate ventilation.

• Manufacturer recommended ambient temperature is 21°C

• All connection cables must be screwed or locked to the chassis housing.

• The device is designed to be used in horizontal position only.

• The device is no longer safe to operate when

— the device has visible damage or

— the device no longer functions.

• In these cases, the device must be shut down and secured against unintentional

operation.

• Repairs/service may only be carried out by a Themis Computer qualified ser-

vice technician.

• Do not open the chassis, or perform services/repairs when the equipment is

powered on, due to electrical shock hazard.

• The device may only be opened for the installation and removal of extension

(PCI) cards, memory modules, storage drives, fan housings, power supplies,

and the lithium battery—all in accordance with the instructions given in this

manual.

• If extensions are made to the device, the legal stipulations and the device spec-

ifications must be observed.

• The device must be switched off when removing the top cover; for example,

before installing extension (PCI) cards.

Operation of Laser Source Devices

DVD/CD-ROM drives contain laser light-emitting diodes (classified in accordance

with IEC 825-1:1993: LASER CLASS 1) and, therefore, must not be opened.

If the enclosure of such a drive is opened, invisible laser radiation is emitted. Do

vii

Themis Computer

RES-XR4-1U Installation Manual

Safety Instructions

not allow yourself to be exposed to this radiation.

The laser system meets the code of Federal Regulations 21 CFR,1040 for the USA

and Canadian Radiation Emitting Devices Act, REDR C 1370.

Electrostatic Discharge (ESD)

A sudden discharge of electrostatic electricity can destroy static-sensitive devices

or micro-circuitry. Proper packaging and grounding techniques are necessary pre-

cautions to prevent damage. Always take the following precautions:

1. Transport boards in static-safe containers such as boxes or bags.

2. Keep electrostatic-sensitive parts in their containers until they arrive at static-

free stations.

3. Always be properly grounded when touching a sensitive board, component, or

assembly.

4. Store electrostatic-sensitive boards in protective packaging or on conductive

foam.

Grounding Methods

Finnish: laite on liitettävä suoja maadoituskoskettimilla varustettuun pistorasiaan

Norwegian: Apparatet må tilkoples jordet stikkontakt

Swedish: Apparaten skall anslutas till jordat uttag

Guard against electrostatic damage at workstations by following these steps:

1. Cover workstations with approved anti-static material. Provide a wrist strap

connected to a work surface and properly grounded tools and equipment.

2. Use anti-static mats, heel straps, or air ionizers to give added protection.

3. Provide a wrist strap connected to a work surface and properly ground tools and

equipment.

4. Handle electrostatic-sensitive components, boards, and assemblies by the case

or the PCB edge.

5. Avoid contact with pins, leads, or circuitry.

viii Themis Computer

RES-XR4-1U Installation Manual Version 1.5

6. Turn off power and input signals before inserting and removing connectors or

test equipment. Power is not considered off until all power supplies have been

disconnected.

7. Keep the work area free of non-conductive materials such as ordinary plastic as-

sembly aids and Styrofoam.

8. Use field service tools, such as cutters, screwdrivers, and vacuums that are con-

ductive.

9. Always place drives and boards PCB-assembly-side down on the foam.

10. Grounding wire size shall be no less than 16 AWG.

11. Overcurrent Protection relies on proper building installation and Earth connec-

tion (ground).

12. High Voltage; Earth connection is essential before connecting the power supply

units

Instructions for the Lithium Battery

Systems are equipped with a lithium battery installed on the motherboard. To

replace this battery, please observe the instructions that are described in this man-

ual.

Follow all local guidelines and regulations for disposing of used batteries .

Warning: There is a danger of explosion when the wrong type of battery is used

as a replacement.

Warning: There is a danger of explosion if attempting to recharge the lithium

battery installed on the motherboard.

Note: Switzerland: Annex 4.10 of SR 814.013 applies to standard batteries.

Inhaltsverzeichnis

Andere Themis Server Handbücher

Themis

Themis RES-32XEL Bedienungsanleitung

Themis

Themis RES-XR4-3U Bedienungsanleitung

Themis

Themis CoolShell 3U Bedienungsanleitung

Themis

Themis RES-32XR3-S Bedienungsanleitung

Themis

Themis RES-11XR3 Bedienungsanleitung

Themis

Themis RES-22XR3 Bedienungsanleitung

Themis

Themis CoolShell CS-3U Bedienungsanleitung

Themis

Themis RES-22DCX Bedienungsanleitung

Themis

Themis CS-5U Bedienungsanleitung

Themis

Themis RES - 32XR3 Bedienungsanleitung

Themis

Themis RES-32XR3-S Bedienungsanleitung

Themis

Themis 200 Bedienungsanleitung

Themis

Themis RES-22XR3 Bedienungsanleitung

Themis

Themis RES-32DCX Bedienungsanleitung

Themis

Themis RES-12XR3 Bedienungsanleitung

Themis

Themis RES-21XR3 Bedienungsanleitung

Themis

Themis RES-22XR3 Bedienungsanleitung

Themis

Themis RES-32XR3/FIO Bedienungsanleitung

Themis

Themis RES-12DCX Bedienungsanleitung

Themis

Themis RES-12XR3-S Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung