Thermadyne Fabricator 252i US Bedienungsanleitung

CONTROL PCB REPLACEMENT INSTRUCTIONS

0-5248 Rev AB 1 May 16, 2012

Kit Componants

The following components are included in this kit.

• ControlPanelPCBAssembly

• AntiStaticStrap

• MountingScrews(4)

• Instructions

Control PCB Replacement

NOTE

This process is the same for the Fabricator and the Transmig units. Transmig is shown in these in-

structions.

1. Disconnect power from the power supply

2. Locate the anti static strap in this kit and follow instructions for proper use and ﬁt it to your body.

3. Removefour(4)ControlPanelscrews(#1).

Art # A-1

Figure1:FrontPanelScrewRemoval(Transmigshown)

ThermadyneHoldingsCorporation

Suite300,16052SwingleyRidgeRoad

St.Louis,MO63017,USA

Telephone:1-800-426-1888•Fax:1-800-535-0557

Email: [email protected]

www.thermalarc.com

Manual 0-5248

Control PCB Replacement and

Part Numbers for

Fabricator 252i US W7005381

Fabricator 252i EU W7005388

Transmig 250i W7005336

Assembly Instructions

CONTROL PCB REPLACEMENT INSTRUCTIONS

4. TiltpaneltowardyouanddisconnecttheRibbonCablebyippingthetwolockingtabsoutwardthenlifting

the harness connector from the board.

Art # A-10???

Figure2:ControlPCBAccess

5. Remove the control panel assembly and replace with the new one by reversing these procedures.

6. LocatethenewControlPanelPCBAssemblyandorientitliketheonejustremovedandattachtheribbon

cable making sure it snaps into place with both locking tabs being activated.

7. Carefullysetthecontrolpanelassemblybackintothefrontpanelandsecurewiththefourscrews.

8. Apply power to the unit and verify the control panel is working.

NOTE

Any information/calibrations previously stored are now gone. All information is now factory default

and any desired calibrations will need to be done again.

U.S. Customer Care: 800-426-1888 / FAX 800-535-0557 •Canada Customer Care: 905-827-4515 / FAX 800-588-1714 www.thermal-dynamics.com

International Customer Care: 940-381-1212 / FAX 940-483-8178

A Global Cutting & Welding Market Leader

™

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Thermadyne Schweißsystem Handbücher

Thermadyne

Thermadyne THERMAL ARC 130 GTS & S CC/TIG Bedienungsanleitung

Thermadyne

Thermadyne Thermal Arc 400GMS CC Bedienungsanleitung

Thermadyne

Thermadyne THERMAL ARC ARC-MASTER 351 Bedienungsanleitung

Thermadyne

Thermadyne Fabricator 211i Bedienungsanleitung

Thermadyne

Thermadyne Thermal Arc 185TSW Bedienungsanleitung

Thermadyne

Thermadyne CE CutMaster 51 Bedienungsanleitung

Beliebte Schweißsystem Handbücher anderer Marken

Berner

Berner PLASMACUT 54 Bedienungsanleitung

Pro Spot

Pro Spot PR-155 Bedienungsanleitung

Forney

Forney 210 Bedienungsanleitung

Thermal Arc

Thermal Arc 400S Bedienungsanleitung

Lincoln Electric

Lincoln Electric HANDYMIG 170I Bedienungsanleitung

GYS

GYS PROTIG 201 AC/DC Bedienungsanleitung

TAFA

TAFA 30*8B35 Bedienungsanleitung

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Bedienungsanleitung

ESAB

ESAB Buddy Arc 145 Bedienungsanleitung

CIGWELD

CIGWELD 636804 Kurzanleitung

Red-D-Arc

Red-D-Arc DC-400 Bedienungsanleitung

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung

Elettro

Elettro HI-MIG 3000 SYNERGIC Bedienungsanleitung

WIA

WIA Weldmatic 270 CP132-2 Bedienungsanleitung

Sonics

Sonics H520T Bedienungsanleitung

Miller

Miller Big Blue 400D Bedienungsanleitung

NewArc

NewArc RT2000 Kurzanleitung

Hypertherm

Hypertherm powermax1000 Bedienungsanleitung