Thermo King TouchPrint Bedienungsanleitung

Printer

TK 61179-12-OP (Rev. 5, 02/16)

TABLE OF CONTENTS

1. FIRST AID AND SAFETY..... 2

1.1 Electrical Hazard.................... 2

2. INTRODUCTION ................... 3

2.1 General Information............... 3

3. PRODUCT OVERVIEW ........ 4

3.1 Main Components .................. 5

3.2 Inputs and Outputs................. 6

3.3 Power Supply ......................... 7

3.4 Communication Interfaces ..... 7

4. GETTING STARTED............. 9

4.1 Factory Settings...................... 9

5. BASIC OPERATIONS.......... 10

5.1 Quick Print ........................... 10

5.2 Quick Info............................. 10

5.3 Print Menu Print by Date Option

Enabled................................. 11

5.4 Print Menu Print by Date Option

Disabled ................................13

6. USER MENU ........................ 15

6.1 Print by Date Option............. 15

6.2 Data Transfer Interval .......... 15

6.3 Contrast ................................ 15

6.4 Language.............................. 16

6.5 Brightness ............................ 16

6.6 TouchPrint Firmware ........... 16

6.7 Export in Pdf or Text Format 16

6.8 Delete Data........................... 16

7. ADVANCED OPERATION. 17

7.1 Service Menu ...................... 17

8. SPECIFICATION ................. 21

8.1 Type of Application ............ 21

8.2 Autonomous Power............. 21

8.3 Protection ............................ 21

8.4 Supply Voltage.................... 21

8.5 Storage Capacity .................. 21

8.6 Climatic Environment.......... 22

8.7 EMC..................................... 22

8.8 Cleaning and Maintenance.. 22

9. TROUBLE SHOOTING....... 23

10. APPENDIX......................... 25

10.1 Appendix 1......................... 25

10.2 List of Errors ...................... 26

10.3 Troubleshooting Flow Charts. 28

HISTORY

REV 1:

1. Added Note in Chapter 7, Section 7.1.8 -

highlighted in grey,

2. Added comment in Chapter 9 - highlighted

in grey,

3. Password updated to 32010.

REV 2:

1. Added section 10.2, Troubleshooting flow

charts

REV 3:

1. Updated section 10.2, Troubleshooting flow

charts

REV 4:

1. Updated section 10.2, Troubleshooting flow

charts

REV 5:

1. Added section 7.1.9, Graphical printing

2. Added section 10.2, List of errors

3. Updated section 10.3, Troubleshooting flow

charts

1. FIRST AID AND SAFETY

WARNING!

A battery can be dangerous. A battery

contains a flammable gas that can ignite or

explode. A battery stores enough electricity

to burn you if it discharges quickly. A

battery contains battery acid that can burn

you. Always wear goggles or safety glasses

and personal protective equipment when

working with a battery. If you get battery

acid on you, immediately flush it with water

and medical attention.

1.1 ELECTRICAL HAZARD

Units with electric operation or electric standby

present a potential electrical hazard. Always

disconnect the high voltage power cable before

working on the unit.

2. INTRODUCTION

2.1 GENERAL INFORMATION

This manual is published for informational

purposes only and the information being

furnished herein should not be considered as

all-inclusive or meant to cover all

contingencies. If further information is

required, consult your Thermo King Service

Directory for the location and telephone

number of the local dealer.

All service requirements, major and minor,

should be handled by a Thermo King dealer.

Performing pre-trip checks and enroute

inspections on a regular basis will minimize

on-the-road operating problems. A closely

followed maintenance program will also help

keep your unit in top operating condition.

DISCLAIMER

The manufacturer, Thermo King Corporation,

assumes no responsibility for any act or action

taken on the part of the owner or operator in

the repair or operation of the products covered

by this manual that are contrary to the

manufacturer’s printed instructions. No

warranties expressed or implied, including

warranties arising from cause of dealing or

usage or trade, are made regarding the

information, recommendations, and

description contained herein. The

manufacturer is not responsible and will not

be held liable in contract or in tort (including

negligence) for any special, indirect or

consequential damages, including injury or

damage caused to vehicles, contents or

persons, by reason of the installation of any

Thermo King product, its mechanical failure

or the failure of owner/operator to heed

caution and safety decals strategically located

on the product.

3. PRODUCT OVERVIEW

The TouchPrint Printer has been designed specifically to communicate to

the certified Thermo King Dataloggers CargoWatch and DAS.

The TouchPrint Printer will read and print the records stored in these

dataloggers in a standard format.

TouchPrint Printer is available in 2 models as described below:

TouchPrint Truck for in-cab installation in a standard DIN radio slot

TouchPrint Trailer in weatherproof enclosure for external installation on trailers

TouchPrint Printer reads temperatures and status (ON/OFF) conditions

from the connected datalogger and stores temporarily these information

in the form of individual files, either based on marker (start of trip) or

date and time. The printer can then produce a record of any specific

period, including the full current day’s measurements or any previous day

retained in the temporary data storage as either a paper ticket printout or

in an electronic format (.pdf or .txt) through a USB flash drive. The user

can choose to print information in either Delivery Ticket (current

temperatures) or Journey Ticket (recorded temperature and status

conditions) layout.

3. PRODUCT OVERVIEW

3.1 MAIN COMPONENTS

The TouchPrint data logger comprises three main components:

the TouchScreen, the Printer and the micro controller.

312

1. Touchscreen

2. Printer

3. Mini USB Port

Main Components

3.1.1 THE TOUCHSCREEN

The Touch Screen interface is made of 2 elements:

– An LCD display 64 x128 dots with a backlight.

The backlight of the display (when OFF) is turned ON by operating

any key, and will then stay on for a configurable period of time. 

The ignition input may be used to backlit the display continuously

and to disable the sleep mode, independently of any key operations,

by specific setting (select Auto) of the backlight parameter

in the User menu.

– A Capacitive Touch keyboard with 8 keys, 6 on the display and 2 on

the side.



These 8 keys have different functions, please refer to the section User

Menu and Service Menu for more details.

The display is on sleep mode when no printing operations is required.

In that case the display is bank. Pressing any key on the display will wake

up the Printer and the main Menu will appear. See section "5. BASIC

OPERATIONS" on page 10 describing the Main Menu icons.

3.1.2 THE PRINTER

The TouchPrint printer mechanism is of Thermal type. The printing

width is 44 mm wide, 384 pixel. And the Thermal paper rolls dimensions

is the standard 57,5mm, 28mm of outer diameter, 8 m of paper, usually

used in digital Tachographs.

If paper gets jammed, the printer mechanism will protect itself with

an internal protection device.

If the printer runs out of paper, it will stop printing and retain the data.

And a clear indication on the display will indicate the paper missing

situation. When paper presence is restored, the printer will start printing

again the ticket previously required, from the last “section”, in order to

have complete printed data.

3. PRODUCT OVERVIEW

The paper roll replacement should be quick. By opening the lid

on the face of the printer, it will release the paper holder, allowing to slot

in the new roll without any specific fitting. The only precaution is to

insert the roll with the printing side upward, otherwise it won’t print.

3.1.3 THE UP CONTROLLER

The 2 main element of interest on the main board is the Flash memory

and the Real Time Clock.

The Memory size of the TouchPrint Printer is sufficient to store

temporarily the datalogger records for a limited period.

The limitation is linked to the memory space allocated for the temporary

data park. That memory works as a circular buffer, deleting the older

records when the memory is full.

Depending of the logging interval of the datalogger, the TouchPrint

printer will be able to hold data between 2 months and 1 year period.

3.2 INPUTS AND OUTPUTS

1. Power Terminal

2. SerialCommunication Terminal

(RS232)

3. PRODUCT OVERVIEW

3.3 POWER SUPPLY

The supply may be any voltage between 10.5 Vdc and 32 Vdc. Up to

36 Vdc may be applied for a short periods of time, without damaging

the printer.

The Printer has a power saving mode.

This “sleep mode” is coming active after 15 minutes without pressing

a key, unless the ignition input is powered.

In power saving mode the Printer may wake up to enable periodical data

transfer from the attached datalogger, but:

– does not allow printing;

– does not show anything on the LCD display.

In case a USB flash drive is connected to the Printer, the “sleep mode”

will be delayed until the usage of the USB serial connection is complete.

In other words, the Printer will not enter the “sleep mode” if a USB flash

drive is connected.

In power saving mode the consumption of the Printer is under 10 mA

(to allow for use of 50 Ah in 4 months).

The Printer goes back to the normal mode when pressing any Touch key,

for a period of 15 minutes.

3.4 COMMUNICATION INTERFACES

3.4.1 USB PORT

A USB On the Go interface is present on the front panel of the product.

The USB Host is an embedded USB stack supporting USB MSC (Mass

Storage Class) class. Integrated with file System, it allows the Printer

application to create, save and read files in standard storage devices and

Windows compatible FAT32. The USB port has a two fold function:

1. To send data in an electronic format to a Flash memory stick. 

User can select to receive a “soft version” of the trip/delivery tickets,

in either a text file (txt format) or in a portable document format (pdf)

file. The format is selectable in the USER menu.

Use cases:

– the TouchPrint allows via the USER menu to choose where to

deliver the data to paper ticket or USB flash drive;

– Journey or delivery tickets could be “printed” in tabular view in

the USB flash drive;

– the header and the content of the file hosts the same information and

in the same format as if printed on a paper;

– when sending the data to the USB flash drive, the display shows

a clear indication;

3. PRODUCT OVERVIEW

– the USB host port accepts most of the commonly used USB Flash

Drives;

– in case the USB Flash drive memory is full, the TouchPrint will

generate an error message.

2. To update the Printer firmware

– Users have the possibility to upgrade the printer if required by

loading the necessary file onto a USB flash drive. This flashload

capability is available through the use of the USB host port in case

of firmware update (i.e. new features added, bug fixes, …) and setup

upgrades (i.e. addition or modification of the languages via

the glossaries).

– The procedure is detailed in the section "7. ADVANCED

OPERATION" on page 17 among the Service Menu functions.

3.4.2 SERIAL PORT

Serial communication port (RS232) is available in the back part of

the product, typically to get access to the stored data from the connected

Thermo King datalogger, either CargoWatch (HMI fw version 6512 and

later) on Trailer applications or DAS on Truck applications, model DAS

II (fw version 5020 and later) and model DAS IV (fw version 5400).

To configure this serial communication port, Refer to the section "7.1.4

Uart Setting" on page 18.

4. GETTING STARTED

4.1 FACTORY SETTINGS

Below are the settings of the TouchPrint Printer as programmed during

the production process:

The default values for the parameters of the User menu – see section

"6. USER MENU" on page 15 – are as follows;

Print by Date option Enabled, meaning periodical storage of

the Datalogger records into the Printer

memory. The data transfer is continuous

when the device is powered.

Data transfer interval 20 mins

LCD Display Contrast 50%

Language English

LCD Display Backlight

Intensity 50%

Firmware release MSK557, read only information

Parameters settings T1 = 30 sec, T2 = 100 sec, T3 = 150 sec,

T4 = 1200 sec

The default values for the parameters of the service menu – see section

"7.1 Service Menu " on page 17– are as follows:

PRINTER model TOUCHPRINT PR, read only information.

Buzzer enable No

Serial ports setting

(RS-232) Protocol: PRINTER; baudrate: 9600;

parity: N, stop bit: 1

Date format selection: dd/mm/yyyy

File format for data

download to USB flash

drive:

.pdf

Andere Handbücher für TouchPrint

Inhaltsverzeichnis

Andere Thermo King Drucker Handbücher

Thermo King

Thermo King TouchPrint Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung