PLD-212 is specially designed to detect the leakage of vehicle pipeline system. It can be used
for leakage detection of pipeline system of automobiles, motorcycles, snowmobiles, off-road
vehicles, ATVs, light trucks, speedboats, ships, etc. It has a wide range of applications and is
not subject to Check equipment shape restrictions.
3. Operation tutorial
3.1．Preparations
a) Open the oil filling port, use the aid of the funnel, and fill the smoke oil into the oil tank.
Please make sure that the oil level of the smoke oil does not exceed the Max line.
Note: If the smoke oil is added too much, the equipment will stop working, and the excessive smoke
oil needs to be taken out.
b) Install the smoke pipe to the smoke outlet and fasten it to the connection with clips.
c) Connect the DC12V power supply to the device.
d) The device is ready to use.
Note: Please check the oil level window before use to ensure that the smoke oil is sufficient during
use to avoid equipment failure.
3.2.Operating equipment
a) Connect the DC12V vehicle battery, the power on/off indicator will light up and the
device will start generating air pressure.
Note: The red clip is connected to the positive pole +, and the black clip is connected to the negative
pole -.
b) Turn the flow adjustment knob to the maximum, the flow meter will indicate the flow.
c) Cover the mouthpiece on the cigarette pipe with your finger, the pressure gauge will
display the output pressure value in real time.
d) Press the smoke mode switch, the smoke mode indicator will light up and the device will
start producing smoke.
4. General detection steps
4.1. Turn off the vehicle.
