THOMSON MW-1266 Bedienungsanleitung

PLEASE READ BEFORE OPERATING THIS EQUIPMENT.

Model No.: MW-1266

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water – The appliance should not be

used near water or moisture – for example, in a wet basement or near a

swimming pool, and the like.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacture’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding plug. A

polarized plug has two blades with one wider than the other. A grounding

plug has two blades and a third grounding prong. The wide blade or the

third prong is provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at

the plugs,convenience receptacles, and at the point where they exit from

the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug the apparatus during lightning storms or when unused for long

periods of time.

13. Refer all servicing to qualified personnel. Servicing is required when the

apparatus has been damaged in any way, such as power supply cord or

plug is damaged, liquid has been spilled or objects have fallen into the

apparatus has been exposed to rain or moisture, does not operate normally,

or has been dropped.

14. CAUTION: These servicing instructions are for use by qualified service

personnel only.To reduce the risk of electric shock, do not perform any

servicing other than that contained in the operating instructions unless you

are qualified to do so.

15. Do not install this equipment in a confined or building-in space such as

a book case or similar unit, and remain a well ventilation conditions at open

site. The ventilation should not be impeded by covering the ventilation

openings with items such as newspaper,

table-cloths, curtains etc.

16. WARNING：Please refer the information on exterior bottom enclosure

for electrical and safety information before installing or operating the

apparatus.

17. WARNING：To reduce the risk of fire or electric shock, do not expose

this apparatus to rain or moisture. The apparatus shall not be exposed to

dripping or splashing and that objects filled with liquids, such as vases,

shall not be placed on apparatus.

18. CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

19. WARNING: The battery (battery or batteries or battery pack) shall not

be exposed to excessive heat such as sunshine, fire or the like.

20. WARNING: The mains plug is used as disconnect device, the

disconnect device shall remain readily operable.

21. This equipment is a Class II or double insulated electrical appliance.

It has been designed in such a way that it does not require a safety

connection to electrical earth.

22.

23.

- This lightning flash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of non-insulated “dangerous

voltage”within the product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock.

- Warning: To reduce the risk of electric shock, do not remove cover (or

back) as there are no user-serviceable parts inside. Refer servicing to

qualified personnel.

- The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance instructions

in the literature

accompanying the appliance.

LOCATION OF CONTROLS

Front View

Top View

Back View

REMOTE CONTROL

1 Power Indicator

2 USB port (only for charging)

3 Remote sensor

>( / Vol + ) Button:

·Press this button once to to

advance to the next track .

Press and hold this button to

adjust volume level up.

9Aux-in Jack

10 AC Power

MODE button

Press to toggle between

Bluetooth and Aux-in modes 11 EQ Button

12 MUTE Button

5 Play/Pause button Album up

14 Album down

6 Power On/Standby Button 15 button, previous track

16 button, next track

17 OK Button

18 Vol - Button

19 Vol+ Button

20 Bass- Button

< ( / Vol -) Button

·Press this button once to

return to the beginning of

current track or previous track.

·Press and hold this button to

adjust volume level down.

21 Bass+Button

POWER SOURCES

Power of Main unit

This unit is designed or operated on AC 100-240V~50/60Hz household

mains supply, connect the AC cord into a convenient AC wall outlet.

Power of Remote Control

To use the remote control, please ensure the remote control battery

CR2032 (included) is installed properly and take the insulation clarity paper

out.(Once you stop to use the remote control, please Insert in it same as

before). Replace the remote control battery when it stops working. It is

highly recommended to use a good quality button cell.

BATTERY NOTE AND CARE

Danger of explosion if the battery is replaced incorrectly. Replace only

with the same type battery.

Only use a good quality known brand battery to ensure the longest life

and best performance.

If the remote is not to be used for an extended period of time, remove the

battery. An old or leaking battery can cause damage to the remote and

may void the warranty.

Do not dispose of batteries in fire. Batteries may leak or explode.

Do not try to recharge batteries that are not intended to be recharged;

they can overheat, rupture and leak (Follow battery manufacturer’s

directions).

ACCESSORIES

1 x Remote Control (include 1PC button cell CR2032)

1 x User manual

1 x Line-in cable

GETTING STARTED

WARNING: Do not apply power to the unit until all of your connections are

made.

1. Plug the AC cord plug into a convenient AC wall outlet.

2. The power indicator will be lights up with ‘Red’ colour. The unit enters

into ‘STANDY BY’ Mode.

2. Press the Button on main unit or press & hold the key on remote

control to turn on the unit.

3. Press and hold the Button on main unit or the key on remote

control to turn on the unit to switch the unit back to Standby mode.

4. Remove the power plug out of the AC wall outlet if you want to switch off

the main voltage completely.

How to change the play mode

Press the MODE Button during power on, the play mode will be changed

between the Bluetooth mode and AUX-IN mode, the power indicator will be

in different colour during different play mode:

Green colour for Aux-in mode

Blue colour for Bluetooth mode

SPECIAL TIPS:

If Blue colour indicator flashes means that the speaker is available for

pairing with other Bluetooth devices now, and if pairing is completed, the

blue colour indicator stops flashing.

Playback via Bluetooth

Bluetooth involves a technology for wireless radio connection of devices

over a short distance. Devices with Bluetooth standard are transmitting

between 2.402 and 2.480 GHz in the ISM band (Industrial, Scientific and

Medical). Interference can be caused for example by WLAN-networks,

DAB radios, cordless phones, or microwave ovens which work on the

same frequency band.

This device offers you the possibility to use a Bluetooth enabled device.

The functional radius is limited to approx.10 metres depending on the

surroundings and the unit used.

If your playing device supports the A2DP profile (Advanced Audio

Distribution Profile) and has a music-player function, then you can also

wirelessly transfer music to the device. The A2DP profile involves a

multi-vendor Bluetooth profile. By streaming, stereo-audio signals are

wirelessly transferred between the playing device (source) and the

receiving device.

Due to the different device manufacturers, models, and software versions,

a full functionality cannot be guaranteed.

Logging on devices (Pairing)

Before you listen to music via the unit, you must pair the devices.

1. Ensure, that the Bluetooth function is activated in your player (e.g.

mobile phone). For this, refer to the operation manual of your player.

2. Press the MODE button repeatedly, until the power indicator changed to

blue to enter the Bluetooth mode. The blue color indicator flashes to show

that the unit is in pairing mode.

3. Chose the Bluetooth menu in your player and register the device in your

player. For this, refer to the operation manual of your player. The device

“MW-1266”will show in your player as a selection.

NOTE:

Only one playback unit can be connected to the speaker. If the speaker is

already connected to another playback unit, the speaker will not appear

in the BT selection menu.

4. If your device asks for a passkey (depending on the device

manufacturers, model, and software version), then enter digits “0000”(four

zeros) and press OK.

If pairing has been carried out successfully, the Blue colour indicator stops

flashing.

For the further procedure, please refer to the user manual of the playback

unit. If possible, adjust the volume of the external unit to a comfortable

level.

NOTE:

•Depending on the device manufacturer, you need to perform the

registration (PAIRING) again to connect the devices

•The Bluetooth compatibility cannot be ensured for devices (e.g. mobile

phones) getting released in the future.

•To ensure an optimal connection, make sure that the battery of your

player is completely charged.

•Some of the mobile phone brands have an energy-saving mode.

Deactivate the energy-saving mode as it can otherwise result in

problems during the data transfer through Bluetooth.

•To be able to transfer audio data, Bluetooth needs to stay activated in

your player Observe the operation manual of your player.

•If a mobile phone on which you are playing music receives a call, the

music will be interrupted. The sound however is not played back via the

speaker. After you have ended the call, the devices are connected to

each other again and playback continues. The volume increases slowly.

USB Port : 5V Power Supply

This USB port is designed for charging external devices only.

AUX-IN (LINE IN) OPERATION

If you are using an iPod or other MP3/digital audio player which can not

connect this unit via Bluetooth, you can still play it on the unit via an audio

connecting cable.

1. Connect an end of the audio cable (accompanied) to the headphone or

line-out jack of an audio device and plug the other end into the Aux -in jack

located on back of the main unit .

2. Press the button on the main unit or press & hold the key on

remote control to turn on the unit.

3. Press MODE Button until the power indicator turns to Green to enter

the AUX-IN mode.

4. Start the playback of the audio device connected.

5. Press “Vol +” / “Vol – ” key on remote control or press and hold the“>”/

“<”button on the main unit to raise/lower the volume level. When finished,

press and hold the button on the main unit or press & hold the key

on remote control to turn off the main unit. Remember to turn off your audio

device, too.

TROUBLESHOOTING GUIDE

Should you experience difficulties in the use of this player, please refer to

the following chart.

Fault Cause Solution

Unit cannot be

operated.

Unit crashes and

“hangs”

Disconnect from the mains for

around 5 seconds. Then switch the

unit on again.

Speaker is not

paired to the audio

source.

Check whether a connection exists.

If necessary, pair the speaker

again to the audio source.

Increase the volume on the

speaker

No audio signal

via the

Bluetooth

connection Volume too low Increase the volume on the the

audio source.

Pairing does not

work

Check whether the audio source

supports the A2DP protocol

Audio source is

switched off Switch on the audio source

Bluetooth is

switched off at the

audio source.

Switch on the Bluetooth function in

the audio source.

Speaker cannot

be connected

Bluetooth version

is not supported. Use a different playback unit.

Poor sound

quality from a

Bluetooth®

device

Bluetooth device

is almost out of

range of the

MW-1266

Move your Bluetooth device

closer to the MW-1266

Low battery. Replace the battery with correct

type CR2032

Remote control

is not

functioning

properly.

Remote Control

is not pointed

to ward the IR

window

Point the Remote Control to ward

the unit IR window, use with in 10

feet of the unit.

Inhaltsverzeichnis

Andere THOMSON Sprecher Handbücher

THOMSON

THOMSON WS06IPB Bedienungsanleitung

THOMSON

THOMSON WS03 Bedienungsanleitung

THOMSON

THOMSON WS03 Bedienungsanleitung

THOMSON

THOMSON WS02 Series Bedienungsanleitung

THOMSON

THOMSON WS04 Bedienungsanleitung

THOMSON

THOMSON WS702 Bedienungsanleitung

THOMSON

THOMSON CS 540 Bedienungsanleitung

THOMSON

THOMSON WS01 Bedienungsanleitung

THOMSON

THOMSON SB220B Bedienungsanleitung

THOMSON

THOMSON CR300IVCA Benutzerhandbuch

THOMSON

THOMSON WS01 Bedienungsanleitung

THOMSON

THOMSON WSP 740 Bedienungsanleitung

THOMSON

THOMSON WS502 Bedienungsanleitung

THOMSON

THOMSON ACC143 Bedienungsanleitung

THOMSON

THOMSON WS400DUO Bedienungsanleitung

THOMSON

THOMSON ASK 145 Bedienungsanleitung

THOMSON

THOMSON WS07VCA Bedienungsanleitung

THOMSON

THOMSON CR300IVCA Bedienungsanleitung

THOMSON

THOMSON WS600DUO Bedienungsanleitung

THOMSON

THOMSON WS05 Bedienungsanleitung

THOMSON

THOMSON DS301 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung