H-HYBRID-RF-8
3
Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com
Chapter 1 - Introduction
1.1 Product Overview
The Thor Broadcast Hybrid-8 encoder modulator is as all-in-one device integrating MPEG2
encoding and modulating to convert audio/video signals into DVB-C/T/ATSC/ISDB-T RF out. It
supports8 HDMI inputs and 8 3G-SDI inputs; this flexible configuration makes it extremely
scalable for building a headend combination of HDMI and SDI sources.
The signal source could vary from satellite receivers, closed-circuit television cameras, Blu-ray
players, and antenna (off air). Its output signals are to be received by TVs, STB, etc. with the
correlated standard the unit is set to encode with (ATSC/DVB-T/ DVB-C/ISDB-T).
The Hybrid-8 units are widely used everywhere such as the mall, market hall, theatre, hotels,
restaurants, stadiums, race tracks, amphitheatres and etc. for advertising, monitoring, training and
educating in company, schools, campuses, and healthcare.
Convert your local HDMI signal into an RF signal, ready for distribution over coaxial cables.
These modulators support all cable and terrestrial standards.
1.2 Key Features
8 HDMI input, capable of receiving all resolutions up to 1080p
HDCP Compliant
8 3G-SDI inputs
MPEG2 video encoding
MPEG1 layer 2, AAC, and Dolby Digital AC3 audio encoding
1 RF input, to by-pass terrestrial or cable signals
DVB-C/T/ATSC/ISDB-T RF output in every device, Modulation dynamic switching
Each channel supports 1x DVB-C/T/ATSC/ISDB-T output option
Control via web NMS, and easy updates via web
