hen this LED is lit, the unit is working in the Ice Making mode controlled by a temperature
probe on the evaporator. hen the green LED is flashing, the unit is working in the Ice
Making mode controlled by a fixed timer.
3. Yellow LED: Ice Harvest indicator light.
hen this LED is lit, the unit is working in the Ice Harvest mode controlled by a temperature
probe on the evaporator. hen the yellow LED is flashing, the unit is working in the Ice
Harvest mode controlled by a fixed timer.
4. Clean button: hen this button is pressed, the unit enters the Cleaning mode. The green and
yellow LEDs flash together. To stop the Cleaning mode, just press the button again.
5. Mode button: Mainly for service. hen this button is pressed, unit can change from Ice Making
mode to Ice Harvest mode, or from Ice Harvest mode to Ice Making mode. You can judge the
mode from the status of the green and yellow LEDs.
6. Adjust button: Mainly for service. hen this button is pressed, the unit will enter the Ice Size
Adjustment mode. The mode can be judged from the status of the green LED.
Ice Size Adjustment Guide:
1.) Press and hold the “Adjust” button for at least 3 seconds. The unit will enter the Ice Size
Adjustment mode. The “ICE MAKING” LED (green) will be blinking continuously during the
ice size adjustment. Release the button when the LED blinks continuously to adjust the ice size.
2.) hile in the Ice Size Adjustment mode, press the “Clean” button or the “Mode” button for
the desired ice size.
Smaller ice setting:
By pressing the “Clean” button, you can decrease the size of the ice cubes. The “ICE FULL”
LED (red) will flash as you lower the ice size and will finally be blinking at the setting of
smallest ice size.
Larger ice setting:
By pressing the “Mode” button, you can increase the size of the ice cubes. The “ICE HARVEST”
LED (yellow) will flash as the larger size is set and will blink when the setting of largest ice size
has been reached.
After 10 seconds without any operation, the unit will automatically memorize the current state and
return to the previous mode.
N TE:
During the ice size adjustment, the “ICE FULL”, “ICE MAKING” and “ICE HARVEST” LEDS
blinking all at once indicate that the unit is in the regular (middle) setting of the ice size.
hen the machine is in the cleaning stage or ice full stage, the ice size is not available for
adjusting.
Major Functions
1. Completely automatic operation.
2. hen the ice storage bin is full, the machine stops making ice automatically. It starts making ice
again once the cubes are removed.
