Tibet System HD Bedienungsanleitung
USER’S MANUAL
2
NEO HD
Rev 1.0
Caution
Do not clean the product with the liquid
or the volatility chemical. (it may damage
on the product. And it might cause a fire
or an electric shock.)
Do not insert something into the product
and let the product be heavily attacked.
(It causes the defectiveness and a fire and
an electric shock might happen.)
Do not overcoat on the windshield.
(it may distort and dim the video data.)
Make sure to pull out the SDHC card
after turning off the product. (It might
cause the damage on the SDHC card.)
Do not disassemble, repair or modify the
product. It causes the defectiveness. It
will void the warranty.
3
User’s Manual
Thank you for purchasing NEO HD. NEO HD features a built-in GPS antenna,
H.264 video compression for ultra-clear video, and intuitive playback
software for you to archive and view your recorded videos. NEO HD is
designed to record daily driving events inside your vehicle, and from the
driver’s view. To play back the events, please use the included NEO HD
software.
Continuous recording
During driving, the product can keep recording the road view, audio and
GPS coordinates.
Record Speed –MAX. 30 fps
Resolution –720P(1280 x 720), HVGAW (640 x 384)
Event Record
If some events happens while keep the continuous recording, the event
record automatically performs(a user can change the setting menu).
Emergency ( By pressing the emergency button)
Impact (By physical impact on the vehicle)
Over speed (for the case that the speed exceeds the one user set)
Analyze the data for video, audio, speed and GPS coordinates
Recorded data in SDHC card can be easily played back and analyzed in
the exclusive NEO HD viewer program. The recorded video/audio/GPS
coordinates/Speed are to be shown in the NEO HD viewer.
About the product
4
NEO HD
※–Contents of
package can be changed.
NEO HD & Bracket
Cable Holder
AV out cable
Cigar jack cable
CD
Contents of the package
5
User’s Manual
Lens
Bracket
EMG button
button
GPS LED
REC LED
Mic
Power Jack
Mini USB
Monitor port
SD card
Slot
※Mini USB is only for factory’s debugging use. It cannot be used for the other
purpose. It cannot be connected with PC.
Name of Each part
6
NEO HD
NEO HD
Image Sensor
1M CMOS sensor
Audio input
MIC Built In
Video Compression
H.264
Audio Compression
ADPCM
Record resolution
720P(1280*720), HVGAW(640*384)
Record Speed
Max.30fps
Emergence button
Event record by the emergency button
G-Sensor
Event record by the outside impact
GPS sensor
Event record by the user’s set about over speed
Record Media
SDHC card (Max: 32GB, Default 8GB)
Recommendation type: over Class 6
Lens
H93°，V70°
Viewer
Windows XP/ VISTA/ 7
Power
DC 7V~26V (enable Car Battery)
Operation
temperature
-5°~50°C (Storage temperature: -20° ~ 80°C)
Humidity
10~95%
Weight
100g(Except SDHC card)
Size (W x D x H)
104.5(W) x 42(D) x 39.5(H)mm
※As our products are subject to continuous improvement, we and our
subsidiaries reserve the right to modify product design, specifications,
and prices without notice and without incurring any obligation
Features
7
User’s Manual
1. Please insert the SDHC card into the product.
2. Please combine the NEO HD main body and the bracket.
3. Please assign the proper place of the windshield behind
the room mirror and clean up the humidity and dirty on it
with the dry fabric.
4. Please remove the protection cover the adhesive tape of
the bracket.
5. After attaching the bracket on the windshield and fix the
screw of the bracket with the coin.
6. Please connect the power cable with NEO HD and tie up
the power cable.
7. Please start the drive and use the product(Keeping REC
LED light on means the normal operation).
8. Please remove SDHC card after turning off the product
and check the recorded data in the exclusive viewer in PC.
Caution
When you install the product, please stop driving and park the
vehicle at the safe place
First connect the product to the power outlet then turn on it.
Only use the supplied power cable(DC 12V~24V).
Please clean up the windshield where the product is attached
on NEO HD. The dirty and the humidity can make the product
dropped from the windshield.
Easy Installation
8
NEO HD
1. Insert the SDHC card into the SD card slot like the left image. In case that the
SDHC card is compulsorily inserted unlike the left image, damages will happen in
SDHC card and the product.
2. Assemble the bracket with the main body.
3. The screw of bracket locates in the left side from the over view.
4. Assign the place on the windshield, on which the product is installed.
Before the installation, please clean off the dirty and the humidity on the
windshield.
If possible, please install the product behind the middle position of the rear-view
mirror to protect from interfering with a driver’s sight view.
5. Remove the protection cover from the adhesive bracket and loosen the screw
of the mounting bracket slightly loosen to adjust the mounting angle.
6. Firmly press the mounting bracket combined with the product onto the
suitable place of the windshield. Hold for 3 seconds to secure.
7. Tighten the screw of the mounting bracket with the coin. Tighten screw to
secure mounting position, Road view camera’s angle should be adjusted in
accordance with the windshield’s tilt.
8. Put the power cable in order with the cable fix holder.
9. Plug in the car adapter to the product and into the cigarette lighter to power
up.
10. Product takes 30 seconds to start up. It starts recording with a beep. During
normal operation, REC LED will always be on.
11. Connect the mini-jack from the video cable into the Monitor port on the side.
Installation
9
User’s Manual
After clicking “Finish Installation”, the viewer program
automatically runs and the ICON creates.
Run “NEO_HD(1.x.x).exe”file
from the installation CD. (If the
OS is windows VIST/7, click the
right button of mouse and
install with user’s authorization.
Foreign languages are provided
and the program will be
translated according to the PC’s
OS
Select “General installation”
then click “Next”button.
Install the viewer
program
10
NEO HD
Backward play, Play
Volume up/down
1 frame playback
Explore events
Repeat a event
GPS signal window
Pause
Print
Next Event
Back up
Playback speed
Set up
Speed
Open a file
Panorama
Draw Lane
E-google map
(Under the
conditions that the
internet is
connected)
GPS Signal Bar
Viewer Guide
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
