Installing Cable
Note:
⚫Pay attention to the direction of connection.
⚫The Type A Male device needs to supply power to theAOC cable.
⚫Do not exceed cable bending radius.
Using Pull Cover
1.
Place the USB connector inside the pull cover.
2.
Close the pull cover and insert the pulling cable through the pull cover ring.
3. Do not exceed the maximum connector pulling strength (150N) when installing the cable.
*Exceeding maximum pulling strength specifications voids warranty*
Pull Cover Size
Customer Service
We provide limited warranty for the product within one year counting from date of purchase
(The purchase invoice shall prevail).
