TIM4biz.com – Cloud AP5 Quick Installation Guide – June 2017
8
STEP 5 – CLOUD AP5 SIGN-IN AND INITIAL BASIC SETUP
Sign in to the Cloud AP5 using the following default username and password
Enter the Install key and click Install to continue.
The Cloud AP5 will then communicate via the internet to the tim4biz.com website to validate the key,
and if the key is valid, the Cloud AP5 will synchronize with the tim4biz.com website to fetch the unit’s
serial numbers.
Default Installation - Wired Ethernet, DHCP IP Address, No Proxy Server.
If the Cloud AP5 sign-in attempt is successful then the Cloud AP5 will request a DHCP address from
the DHCP server.
When the Cloud AP5 is issued with an IP Address, Subnet Mask, Router/Gateway address and DNS
server address the unit will automatically check to see if there is an internet connection and attempt
to contact the TIM4biz Cloud.
Upon successful contact to the TIM4biz Cloud the Cloud AP5 will prompt you for an Installation Key.
The Installation Key is generated from the TIM4biz website.
NOTE THE INSTALL KEY IS GENERATED BY SIGNING INTO THE TIM4BIZ.COM WEBSITE OR
SUPPLIED BY A TIM TECHNOLOGIES REPRESENTATIVE OR DEALER.
IF YOU CAN’T OBTAIN A KEY, PLEASE E-MAIL SUPPORT@TIM4BIZ.COM FOR ASSISTANCE.
NOTE: IF THE INSTALL KEY IS
INVALID, YOU WILL BE PROMPTED
TO ENTER THE INSTALL KEY AGAIN
Enter the Install key here and
then click on the Apply button to
validate the with the TIM4biz
cloud.
