Timeguard NTTWIFI Handbuch

JOB NUMBER TITLE PG VERSION DATE Size at 100%

XTIM2046 NTTWIFI Instructions 99 719/04/2018 120 x 90 @ 100%

DESIGNER Org A/W A/W AMENDS C: DATE:

ST ST, TM, ST

Installation & Operating Instructions

Wi-Fi Controlled Time Switch

Model: NTTWIFI

1. General Information

These instructions should be read carefully, in full, before installation.

Please note that all instructions are to be left with the customer

after installation.

Note: Timeguard reserve the right to alter these instructions,

and the SupplyMaster app, at any time.

Up to date instructions will always be available for

download at www.Timeguard.com.

2. Safety

• Before installation or maintenance, ensure the mains supply to the

time switch is switched off and the circuit supply fuses are removed

or the circuit breaker turned off.

• It is recommended that a qualified electrician is consulted or used

for the installation of this time switch and install in accordance with

the current IEE wiring and Building Regulations.

• Check that the total load on the circuit including when this time

switch is fitted does not exceed the rating of the circuit cable,

fuse or circuit breaker.

3. Technical Specifications

• 230V AC 50 Hz

• This time switch is of class I construction and must be earthed

• Switch Rating: 16A Resistive (3.68kW) Immersion Heaters

1kW Incandescent and Halogen lighting

500W Fluorescent lighting

100W Compact fluorescent

and LED lighting

• Contact Type: Normally Open, micro disconnection

• Wi-fi specification: 2.4GHz b/g/n

• Frequency Range: 2.412 – 2.484 GHz

• Operating Modes: Permanent ON or OFF, Auto timed, Holiday

• Boost Times: 1 or 2 hour

• Output Light: Yes

• Operating Temperature: 0°C to +40°C

• IP Rating: Intended for indoor use only

• CE compliant

• Dimensions (H x W x D): 120 x 74 x 42mm

Note: Not suitable for use with Discharge Lighting.

ON/OFF

indicator

Override

button

and Wi-Fi

connect

Terminal

cover

Wi-Fi

connection

indicator

Terminal

cover fixing

screw

Note: The timeswitch comes with a tamper proof cover

which is padlockable.

NTTWIFI MAC address and ID Wi-Fi number label

Important: Do not remove this label from the side of the product.

4. Contents

• 1x NTTWIFI time switch

• 2x Mounting screws

• 2x Cable clamp set

• 1x Plastic insert

• 1x Tamper-proof cover

• 1x Instruction manual

Note: all instructions are to be left with the customer after installation.

5. Installation

The NTTWIFI is a Wi-Fi controlled time switch which surface mounts.

There is provision for two front cables, with built in cable clamps.

The contacts are not volt free. There is a loop terminal for earth continuity.

5.1 Ensure the mains supply is switched off and the circuit supply

fuses are removed or the circuit breaker turned off.

5.2 Remove the terminal cover by undoing the fixing screw

on the bottom of the time switch.

5.3 Mark the position of the top wall mounting screw. Drill out the

top mounting hole taking care to avoid any joists, electrical cables

or water/gas pipes that may be hidden beneath the surface.

Insert the rawl plug into the hole.

5.4 Fix the top mounting screw and leave 2.5mm proud off of the wall.

5.5 Place the key hole in the top of the product, over the screw head,

and slide down.

5.6 Mark the position of the lower mounting hole on the wall using

the wall plate as a template.

5.7 Remove the product and drill out the lower mounting hole again

taking care to avoid any joists, electrical cables or water/gas pipes

that may be hidden beneath the surface. Insert the rawl plug into

the hole.

5.8 The 230V 50Hz supply and load cables can enter through the

rear knock outs or the front cable entry ports provided. If the rear

knock outs are being used, remove the blanking plates and pass

the supply and load cables through the holes.

5.9 Place the key hole in the top of the product again, over the screw

head, and slide down.

5.10 Secure the unit to the wall using the lower mounting screw.

If the wiring is through the front cable entry ports, use the cable

clamps provided to secure the supply and load cables.

5.11 Terminate the supply and load cables to the terminal block

ensuring correct polarity is observed and that all bare conductors

are sleeved. Please note the connections are marked beneath

the terminal block (see section 6. Connections).

5.12 Secure the terminal cover back into place using the fixing screw.

Neutral

Load

Terminal

(Blue or

Black)

Live Supply

Terminal

(Brown or

Red) 230V

50Hz

Neutral

Supply

Terminal

(Blue or

Black)

Loop

terminal

for earth

continuity

Green/

Yellow

Switched

Live Load

Terminal

(Brown or

Red)

6. Connections

• The terminals are marked as follows;

7. Setup

Note: the mobile or tablet device must be connected to a 2.4 GHz band

on the router. Pairing on the 5GHz band will result with paring either

timing out or being unsuccessful. Refer to your ISP (Internet Service

Provider) on separating the bands if required.

7.1 Ensure your phone or tablet is connected to your local

Wi-Fi network.

7.2 Download the Timeguard Supplymaster App onto your phone

or tablet by searching for Timeguard on Google Play store or

the Apple App store.

7.3 Install the App, and open it to the registration page.

7.4 Users must first register, and then log in to use App.

First time users must use the main account log in.

Note: User names and passwords cannot contain any

spaces or special characters, and must use letters and

numbers only.

7.5 Then, press the + button (bottom right on the phones screen

to open the add devices menu.

7.6 The Wi-Fi network the mobile or tablet is connected to will be

shown on the App, enter the password for the network SSID.

Important – DO NOT PRESS START AS OF YET.

7.7 On the NTTWIFI, hold down the override button, until the blue

LED light starts to flash.

7.8 Once the blue LED is flashing press start in the App.

The App will search for an available device.

7.9 Once the App has found and configured the NTTWIFI to the

network. the App will prompt the user to rename the device.

If this fails to happen the device name can be manually changed

at any time. From the devices menu swipe left on the device that

requires renaming, then press press edit. An editable name field

called ‘Name:’ will be shown under device information, tap the

field to rename the device. When the name has been changed

confirm this action by pressing the tick icon.

Note: If the device is to be sold, it must be deleted from

the App by the Main account holder. The device can only

be registered to one account at a time.

8. Features of the NTTWIFI Device

Micro Disconnection

• The unit offers micro disconnection of the load using the

programmed times.

• Micro disconnection can also be applied using the override switch

on the front of the unit.

Manual Override

• The override button on the front of the unit provides a permanent off,

or on, until the button is pressed again. It is not overridden by the

next program from the App.

• During the overridden period, the App will show permanent ON, or

permanent OFF. The override can be cancelled in the App by putting

the mode back to Auto Timed.

Light Indicators

• Red ON/OFF indicator. The red light will turn ON when there is

output, and will turn OFF when there is no output. The red light

will flash if there is output, but there is no output load detected.

• Blue Wi-Fi connection indicator. This will illuminate when the

device is connected to Wi-Fi, as detailed in section 7. Setup.

This indicator will flash slowly when attempting to connect to

the server.

Inhaltsverzeichnis

Andere Timeguard Timer Handbücher

Timeguard

Timeguard NTT08 Handbuch

Timeguard

Timeguard BoostMaster TGBT6 Handbuch

Timeguard

Timeguard TS800N Handbuch

Timeguard

Timeguard TS840 Bedienungsanleitung

Timeguard

Timeguard SupplyMaster FST11 Handbuch

Timeguard

Timeguard NTT06 Handbuch

Timeguard

Timeguard FST24 Handbuch

Timeguard

Timeguard TGBT4 Handbuch

Timeguard

Timeguard NTT02 Bedienungsanleitung

Timeguard

Timeguard ETU17 Handbuch

Timeguard

Timeguard ETU17N Handbuch

Timeguard

Timeguard FSTWiFi Handbuch

Timeguard

Timeguard Theben Termina TR 612 top Bedienungsanleitung

Timeguard

Timeguard TG77 Handbuch

Timeguard

Timeguard SupplyMASTER FST11A Handbuch

Timeguard

Timeguard MEU11 Handbuch

Timeguard

Timeguard NTT08 Handbuch

Timeguard

Timeguard FBT4 Handbuch

Timeguard

Timeguard EL17 Bedienungsanleitung

Timeguard

Timeguard TG24 Bedienungsanleitung

Timeguard

Timeguard NTDR1C16 Bedienungsanleitung

Timeguard

Timeguard TGBT6 Boostmaster Bedienungsanleitung

Timeguard

Timeguard NTT03 Handbuch

Timeguard

Timeguard NTT03 Handbuch

Beliebte Timer Handbücher anderer Marken

Intermatic

Intermatic P1131 Bedienungsanleitung

Learning Resources

Learning Resources Time Tracker mini Bedienungsanleitung

CEBEK

CEBEK I-215 Bedienungsanleitung

Somogyi

Somogyi home TS MD 5 Bedienungsanleitung

Profile

Profile 010200280 Bedienungsanleitung

Gizmo

Gizmo T4 Bedienungsanleitung

Tekmar

Tekmar Timer 031 Bedienungsanleitung

Daikin

Daikin DST301B61 Bedienungsanleitung

sisel

sisel ENDA ETM2432 Bedienungsanleitung

B&Q

B&Q TE103 Bedienungs- und Wartungshandbuch

Hozelock

Hozelock AC Plus 2700 Bedienungsanleitung

GIC

GIC Eliro V7DDSS3Eliro V7DFTS3 Bedienungsanleitung

Tork

Tork TU40 Bedienungsanleitung

Emos

Emos EMT400F Bedienungsanleitung

FarmTek

FarmTek Polaris Bedienungsanleitung

Maximum

Maximum CRONUS Bedienungsanleitung

Uberhaus

Uberhaus TD133B Bedienungsanleitung

Clas Ohlson

Clas Ohlson 31-3766 Bedienungsanleitung