TimeTec QF PLUS Bedienungsanleitung
Wireless QR Code & Facial Recognition Terminal
TIMETEC QF PLUS
User Guide
w w w . t i m e t e c c l o u d . c o m
Wireless QR Code & Facial Recognition Terminal
2TIMETEC QF PLUS
w w w . t i m e t e c c l o u d. c o m
COPYRIGHT NOTICE
All rights reserved. No part of this book may be reproduced or transmitted in any form or by any means, elec-
tronic or mechanical, including photocopying, recording, or by any information storage and retrieval system,
without written permission from TimeTec Holding. Every precaution has been made to supply complete and
accurate information. Information in this document is subject to change without prior notice.
DISCLAIMER
No person should rely on the contents of this publication without rst obtaining advice from a qualied profes-
sional person. The company expressly disclaims all and any liability and responsibility to any reader or user of
this book, in respect of anything, and of the consequences of anything, done by any such person in reliance,
whether wholly or partially, upon the whole or any part of the contents of this book.
TimeTec Cloud
3
TIMETEC QF PLUS
w w w . t i m e t e c c l o u d. c o m
TABLE OF CONTENTS
1 BEFORE YOU START 4-5
2 THE OVERVIEW 6
3 INITIALIZATION AND SYNCHRONISATION 7-8
4 SYSTEM SETTINGS 9-13
5 HOW TO CONNECT TO TIMETEC TA & ACCESS 14
To connect to TimeTec TA 14-16
To connect to TimeTec Access 17
4TIMETEC QF PLUS
w w w . t i m e t e c c l o u d. c o m
1 Before You Start
Make sure the QF Plus is connected to the Internet via mobile data or WiFi. The
QF Plus app can only work after it is connected to the TimeTec server.
Figure 1
Enter the mobile ID for the next process.
5
TIMETEC QF PLUS
w w w . t i m e t e c c l o u d. c o m
Register the mobile ID into the TimeTec cloud application (TimeTec TA, TimeTec
Access, TimeTec VMS or iNeighbour) as the QF Master device.
TimeTec VMS TimeTec Access i-Neighbour TimeTec TA
BLE-2 & door
accessories are
not required for
TimeTec TA
Install with
QF Master app
QF Plus
Employee/Visitor
QF Plus verifies and authenticates
access permission
6TIMETEC QF PLUS
w w w . t i m e t e c c l o u d. c o m
2 The Overview
You will find the Online display at the bottom of the screen after the QF Plus
is connected to the Internet. QF Plus will auto-initialise after it is connected to
TimeTec cloud application mentioned before.
The 1icon indicates that the QF Plus is downloading the users’ face templates,
QR codes and access rules from the TimeTec cloud application. The [cloud] icon
will disappear right after the download process has completed. Once it is done,
you can begin to use the QF Plus device.
The QF Plus will push the users’ access records to the server periodically. It will
also update the users’ credentials and access rules. Whenever this happens, a
1icon will appear.
Figure 2
1
7
TIMETEC QF PLUS
w w w . t i m e t e c c l o u d. c o m
3 Initialization and Synchronisation
During the operation, QF Plus scans and verifies the user’s face when a user ap-
proaches it. The user must readjust his/her position to ensure that his/her face
fits within the scanning area.
1Display the date and time
2Display the access point name
3Indicate the in or out action ( is In while is Out, you can configure
this under the TimeTec cloud application.)
Figure 3
1
23
456
8TIMETEC QF PLUS
w w w . t i m e t e c c l o u d. c o m
4Tap here to enter Configuration. ONLY assigned personnel with an
admin password can configure the QF Plus. Refer to Figure 5.
5Indicate the QF Plus’s connection status
6Tap here to switch to scan the QR code. Refer to Figure 4.
When QF Plus switches for QR code scanning, a square box will be prompted on
the screen. Position your QR code within the scanning area.
Tap 6to switch back to face scanning mode. Refer to Figure 3.
Figure 4
6
9
TIMETEC QF PLUS
w w w . t i m e t e c c l o u d. c o m
4 System Settings
Insert your admin username and password (the same credentials you use to
login to the TimeTec cloud application). Tap Login to enter the System Settings.
Figure 5
10 TIMETEC QF PLUS
w w w . t i m e t e c c l o u d. c o m
There are 4 sections in the System Settings:
Figure 6
Users Management
You can check the list of users, credentials and the assigned access rules. See
Figure 7.
Configuration
You can personalise the QF Plus display and scanning behavior. See Figure 8.
Access Records
You can check the access records stored in the QF Plus.
Exit QF Master
To exit the app.
Inhaltsverzeichnis
Andere TimeTec Touch-Terminal Handbücher
Beliebte Touch-Terminal Handbücher anderer Marken
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung
Ingenico
Ingenico AXIUM EX4000 Bedienungsanleitung
Heisei Electronics
Heisei Electronics Q-POS 815 Bedienungsanleitung
Amano
Amano MTX-15 Bedienungsanleitung
FLOWBIRD
FLOWBIRD CWT Compact Touch Bedienungsanleitung
Demco
Demco SP7 Bedienungsanleitung
Motorola
Motorola MTP850 Bedienungsanleitung
YASKAWA
YASKAWA 62H-MDC0 Bedienungsanleitung
MVG industries
MVG industries NeptuLink Bedienungsanleitung
Price Industries Limited
Price Industries Limited FDC Gebrauchsanweisung
Honeywell
Honeywell TemaKey Bedienungsanleitung
EBN
EBN BPC65-B-A16G Bedienungsanleitung