Timex 75331 Bedienungsanleitung
Instruction Manual
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
Features & Benets: Sensor..... 2
Features & Benets: Clock ...... 3
Setup .................................... 4
Outdoor Sensor Setup............ 4
Clock Setup ........................... 4
Atomic Clock ......................... 5
Set the Time, Date & Units ...... 5
Placement Guidelines ............. 6
Using the Clock...................... 7
Backlight Settings................... 7
Troubleshooting ..................... 8
Care & Maintenance.............. 9
Replace Intelli-Time® Battery.... 9
Specications........................10
FCC Information ...................10
Customer Support .................11
Warranty..............................11
Atomic Digital Clock
models 75331 / 75333
2
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Digital Clock
2. Outdoor Sensor
3. Instruction Manual
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
IMPORTANT PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
►
Register a Product
Features & Benets
3
2
1
4
OUTDOOR SENSOR
1. Integrated Hanger
For easy placement.
2. Wireless Signal Indicator
Flashes when data is being sent
to the clock.
3. Battery Compartment
4. Battery Compartment Cover
3
Features & Benets FRONT OF CLOCK
1. Atomic Clock Signal Strength
2. Day of the Week
3. Date
4. Time Zone Indicator
5. Moon Phase
6. Sensor Low Battery Indicator
7. Outdoor Sensor Signal Strength
8. Current Indoor Temperature
Arrow icon indicates the direction
the temperature is trending.
9. Current Outoor Temperature
Arrow icon indicates the direction
the temperature is trending.
10. Atomic Clock
Sets itself to the correct time
and automatically updates for
Daylight Saving Time.
1 32 4 5 6 7 8 910
17 1718 19
16
11 12 13 14 15
BACK OF CLOCK
11. “ ” Button
For setup preferences.
12. “SET“ Button
For setup preferences.
13. “ ” Button
For setup preferences.
14. Integrated Hang Hole
For easy wall mounting.
15. RESET Button
Full reset to factory defaults.
16. Backlight OFF/HIGH/LOW
Switch
17. Fold-Out Stands
For tabletop placement.
18. Battery Compartment
19. Intelli-Time®Battery
Compartment
20. Battery Compartment Cover
(not shown)
4
SETUP
Install or Replace Batteries
AcuRite recommends high quality alkaline batteries for the best product
performance. Heavy duty or rechargeable batteries are not recommended.
The outdoor sensor requires lithium batteries in low temperature conditions.
Cold temperatures can cause alkaline batteries to function improperly. Use
lithium batteries in the outdoor sensor for temperatures below -4ºF / -20ºC.
Outdoor Sensor
1. Slide off the battery compartment
cover.
2. Insert 2 x AA batteries into the
battery compartment, as shown.
Follow the polarity (+/-) diagram in
the battery compartment.
3. Replace the battery cover.
Clock
1. Slide off the battery compartment
cover.
2. Insert 6 x AA batteries into the
battery compartment, as shown.
Follow the polarity (+/-) diagram in
the battery compartment.
3. Replace the battery cover.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to
be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of
used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries
in re, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT
recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
5
Atomic Clock (RCC)
AcuRite atomic clocks use a radio-controlled signal (RCC) to synchronize to the
correct time broadcast by the National Institute of Standards and Technology
(NIST) Radio Station WWVB, located near Fort Collins, Colorado. WWVB
broadcasts the current time and date with split-second accuracy.
Please note: Signal reception is normally better at night and when the weather
is clear. The atomic signal generally takes a few hours to synchronize, so it is
important to manually set the time and date after powering on the clock.
Intelli-Time Technology
Clocks equipped with Intelli-Time technology store settings and instruct the time
and date to set themselves after loss of power or changing batteries.
Set the Time, Date & Units
The clock will immediately begin searching for the atomic signal after batteries
are installed. After the clock acquires the signal or completes its search
(approximately 3 minutes), you may manually adjust the time, date and units.
Press and HOLD the “SET” button located on the back of the clock for 2-3
seconds, to enter SET MODE. Once in SET MODE the preference you are
currently setting will blink on the clock.
To adjust the currently selected (ashing) item, press and release the “ ” or
“ ” buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button to adjust the next
preference. The preference set order is as follows:
TIME ZONE (PST MST CST EST AST HAST AKST)
ATOMIC CLOCK ON/OFF
DAYLIGHT SAVING TIME ON/OFF*
CLOCK HOUR
CLOCK MINUTE
CALENDAR YEAR
CALENDAR MONTH
CALENDAR DATE
TEMPERATURE SCALE (ºF or ºC)
You will automatically exit SET MODE if no buttons are pressed for 10 seconds.
Enter SET MODE at any time by pressing the “SET” button.
*If you live in an area that observes daylight saving time, DST should be set to
ON.
6
Clock Placement
Place clock in a dry area free of dirt and dust. To help ensure an
accurate indoor temperature measurement, be sure to place the
clock away from heat sources or vents.
Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions.
Sensor is water resistant and is designed for general outdoor use,
however, to extend its life place the sensor in an area protected
from direct weather elements.
Hang the sensor using the integrated hang holes or hanger, or by
using string (not included) to hang it from a suitable location, like a
well covered tree branch. The best location is 4 to 8 feet above the
ground with permanent shade and plenty of fresh air to circulate
around the sensor.
Placement for Maximum Accuracy
AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the clock and outdoor sensor are critical to the accuracy
and performance of this product.
Important Placement Guidelines
• To ensure accurate temperature measurement, place units out of direct
sunlight and away from any heat sources or vents.
• Clock and outdoor sensor must be within 165 ft (50 m) of each other.
• To maximize wireless range, place units away from large metallic items, thick
walls, metal surfaces, or other objects that may limit wireless communication.
• To prevent wireless interference, place both units at least 3 ft (90 cm) away
from electronic devices (TV, computer, microwave, radio, etc.).
Setup is Complete
The sensor will now synchronize with the clock. It may take a few minutes for
synchronization to complete.
TV 3
(50 meters)
(165 feet maximum)
(90 cm)
AT
LEAST
APART
7
OPERATION
Using the Clock
Backlight Settings
This clock features an Indiglo® backlight that automatically detects low lighting
and illuminates the display in the dark. To select your backlight brightness
preference, use the Backlight Switch, located on the back of the clock, to select
between: HIGH, LOW, or OFF.
To conserve battery power or prevent the backlight from turning on, you may
choose the LOW or OFF setting for the backlight. The chart below displays
estimated battery life based on your backlight settings.
Note: The backlight MAY turn off at 2:00 AM and 3:00 AM to acquire the
atomic clock (RCC) signal.
Moon Phase
Track the phases of the moon, conveyed through simple lunar phase icons.
Backlight OFF Approximately 3 years
LOW Backlight ON for 8 hours Approximately 1 year
LOW Backlight ON for 24 hours Approximately 3 months
HIGH Backlight ON for 8 hours Approximately 6 months
HIGH Backlight ON for 24 hours Approximately 1 month
Backlight Setting Battery Life
8
Troubleshooting
No outdoor sensor
reception
no bars
If the wireless signal indicator shows no bars:
• Relocate the clock and/or the outdoor sensor. The units
must be within 165 ft (50 m) of each other.
• Make sure both units are placed at least 3 feet
(90 cm) away from electronics that may interfere with
the wireless communication (such as TVs, microwaves,
computers, etc).
• Use standard alkaline batteries (or lithium batteries in
sensor when temperature is below -4ºF/-20ºC). Do not
use heavy duty or rechargeable batteries. NOTE: It may
take up to 20 minutes for clock and sensor to synchronize
after batteries are replaced.
Clock is too dark,
hard to read or
doesn’t work
• The backlight may automatically turn off for 10 minutes at
2:00am and 3:00am to acquire the atomic clock signal.
• Check that the batteries are installed correctly. Batteries
may need to be replaced.
• Increase brightness using backlight switch, located on the
back of the clock.
• Press the RESET button located in the battery
compartment of the clock.
• The optimum viewing angle for this product is from slightly
above it.
Inaccurate
temperature
• Make sure both the clock and sensor are placed out of
direct sunlight and away from any heat sources or vents
(see page 6).
Outdoor
temperature
is ashing or
showing dashes
Flashing of the outdoor temperature is generally an
indication of wireless interference.
1. Bring both the sensor and clock indoors, side by side
and remove batteries from each.
2. Make sure the A-B-C switch on both units match.
3. Reinstall batteries in outdoor sensor.
4. Reinstall batteries in clock.
5. Let the units sit within a couple feet of each other for
about 20 minutes to gain a strong connection.
The unit lost power
or batteries were
changed and the
time is not correct
• The Intelli-Time battery needs to be replaced
(see page 9). Once the new battery is installed,
time and date will need to be set manually.
Atomic signal or time
syncing problems
For additional troubleshooting, please visit:
http://www.nist.gov/pml/div688/grp40/radioclocks.cfm
9
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
(877) 221-1252 for assistance.
Care & Maintenance
Clock Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.
Outdoor Sensor Care
Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.
Replace Intelli-Time Clock Battery
Intelli-Time technology is powered by a pre-installed coin-cell battery that stores
the time and date settings. The battery has a shelf life of several years. Time
and date will need to be entered after replacing Intelli-Time battery. To replace
the Intelli-Time battery:
1. Locate the coin cell battery
compartment door in the
battery compartment of the
clock. Unscrew and remove
the compartment cover.
2. Insert 1 x CR2032 coin
cell battery into the battery
compartment, as shown.
Install battery with “+”
positive terminal facing OUT.
3. Screw in the battery cover.
Remove
Battery Cover
1
CR2032
3V
Insert
CR2032
Battery
2
10
Specications
TEMPERATURE RANGE Outdoor: -40ºF to 158ºF; -40ºC to 70ºC
Indoor: 32ºF to 122ºF; 0ºC to 50ºC
WIRELESS RANGE 165 ft / 50 m depending on home construction materials
OPERATING FREQUENCY 433 MHz
POWER Clock: 6 x AA alkaline batteries
Sensor: 2 x AA alkaline or lithium batteries
DATA REPORTING Outdoor data: 30 second updates
Indoor data: 60 second updates
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, There is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment.
Such modications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Timex Uhr Handbücher
Timex
Timex 75333TKL Bedienungsanleitung
Timex
Timex 06H-096000 Bedienungsanleitung
Timex
Timex Intelli-Time 75071 Bedienungsanleitung
Timex
Timex W-211 Bedienungsanleitung
Timex
Timex Intelli-Time 75071T Bedienungsanleitung
Timex
Timex TK321 Bedienungsanleitung
Timex
Timex 75328T Bedienungsanleitung
Timex
Timex 75322A1 Bedienungsanleitung
Timex
Timex 75329T Bedienungsanleitung
Timex
Timex 75330T Bedienungsanleitung
Beliebte Uhr Handbücher anderer Marken
Silicon Laboratories
Silicon Laboratories SI5324 Bedienungsanleitung
Heathkit
Heathkit GC-1005 Bedienungsanleitung
Oregon Scientific
Oregon Scientific PRYSMA RMR221P Bedienungsanleitung
Andrew O'Malley
Andrew O'Malley DOTKLOK Bedienungsanleitung
ALGE-Timing
ALGE-Timing ASC3 Bedienungsanleitung
Bodet
Bodet Profil 960 Bedienungsanleitung
Progetti
Progetti KALIMERO Handbuch
La Crosse Technology
La Crosse Technology WT-3141b Handbuch
La Crosse Technology
La Crosse Technology W86531 Bedienungsanleitung
Sharp
Sharp SPC900 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 404-50447 Bedienungsanleitung
Datexx
Datexx DF0063 Bedienungsanleitung